## What changes were proposed in this pull request?
Our HDFS cluster configured 5 nameservices: `nameservices1`, `nameservices2`, `nameservices3`, `nameservices-dev1` and `nameservices4`, but `nameservices-dev1` unstable. So sometimes an error occurred and causing the entire job failed since [SPARK-24149](https://issues.apache.org/jira/browse/SPARK-24149):
I think it's best to add a switch here.
## How was this patch tested?
manual tests
Closes#21734 from wangyum/SPARK-24149.
Authored-by: Yuming Wang <yumwang@ebay.com>
Signed-off-by: Marcelo Vanzin <vanzin@cloudera.com>
## What changes were proposed in this pull request?
When using older versions of spark releases, a use case generated a huge code-gen file which hit the limitation `Constant pool has grown past JVM limit of 0xFFFF`. In this situation, it should fail immediately. But the diagnosis message sent to RM is too large, the ApplicationMaster suspended and RM's ZKStateStore was crashed. For 2.3 or later spark releases the limitation of code-gen has been removed, but maybe there are still some uncaught exceptions that contain oversized error message will cause such a problem.
This PR is aim to cut down the diagnosis message size.
## How was this patch tested?
Please review http://spark.apache.org/contributing.html before opening a pull request.
Closes#22180 from yaooqinn/SPARK-25174.
Authored-by: Kent Yao <yaooqinn@hotmail.com>
Signed-off-by: Marcelo Vanzin <vanzin@cloudera.com>
**## What changes were proposed in this pull request?**
When the yarn.nodemanager.resource.memory-mb or yarn.scheduler.maximum-allocation-mb
memory assignment is insufficient, Spark always reports an error request to adjust
yarn.scheduler.maximum-allocation-mb even though in message it shows the memory value
of yarn.nodemanager.resource.memory-mb parameter,As the error Message is bit misleading to the user we can modify the same, We can keep the error message same as executor memory validation message.
Defintion of **yarn.nodemanager.resource.memory-mb:**
Amount of physical memory, in MB, that can be allocated for containers. It means the amount of memory YARN can utilize on this node and therefore this property should be lower then the total memory of that machine.
**yarn.scheduler.maximum-allocation-mb:**
It defines the maximum memory allocation available for a container in MB
it means RM can only allocate memory to containers in increments of "yarn.scheduler.minimum-allocation-mb" and not exceed "yarn.scheduler.maximum-allocation-mb" and It should not be more than total allocated memory of the Node.
**## How was this patch tested?**
Manually tested in hdfs-Yarn clustaer
Closes#22199 from sujith71955/maste_am_log.
Authored-by: s71955 <sujithchacko.2010@gmail.com>
Signed-off-by: Sean Owen <sean.owen@databricks.com>
## What changes were proposed in this pull request?
Fixing typos is sometimes very hard. It's not so easy to visually review them. Recently, I discovered a very useful tool for it, [misspell](https://github.com/client9/misspell).
This pull request fixes minor typos detected by [misspell](https://github.com/client9/misspell) except for the false positives. If you would like me to work on other files as well, let me know.
## How was this patch tested?
### before
```
$ misspell . | grep -v '.js'
R/pkg/R/SQLContext.R:354:43: "definiton" is a misspelling of "definition"
R/pkg/R/SQLContext.R:424:43: "definiton" is a misspelling of "definition"
R/pkg/R/SQLContext.R:445:43: "definiton" is a misspelling of "definition"
R/pkg/R/SQLContext.R:495:43: "definiton" is a misspelling of "definition"
NOTICE-binary:454:16: "containd" is a misspelling of "contained"
R/pkg/R/context.R:46:43: "definiton" is a misspelling of "definition"
R/pkg/R/context.R:74:43: "definiton" is a misspelling of "definition"
R/pkg/R/DataFrame.R:591:48: "persistance" is a misspelling of "persistence"
R/pkg/R/streaming.R:166:44: "occured" is a misspelling of "occurred"
R/pkg/inst/worker/worker.R:65:22: "ouput" is a misspelling of "output"
R/pkg/tests/fulltests/test_utils.R:106:25: "environemnt" is a misspelling of "environment"
common/kvstore/src/test/java/org/apache/spark/util/kvstore/InMemoryStoreSuite.java:38:39: "existant" is a misspelling of "existent"
common/kvstore/src/test/java/org/apache/spark/util/kvstore/LevelDBSuite.java:83:39: "existant" is a misspelling of "existent"
common/network-common/src/main/java/org/apache/spark/network/crypto/TransportCipher.java:243:46: "transfered" is a misspelling of "transferred"
common/network-common/src/main/java/org/apache/spark/network/sasl/SaslEncryption.java:234:19: "transfered" is a misspelling of "transferred"
common/network-common/src/main/java/org/apache/spark/network/sasl/SaslEncryption.java:238:63: "transfered" is a misspelling of "transferred"
common/network-common/src/main/java/org/apache/spark/network/sasl/SaslEncryption.java:244:46: "transfered" is a misspelling of "transferred"
common/network-common/src/main/java/org/apache/spark/network/sasl/SaslEncryption.java:276:39: "transfered" is a misspelling of "transferred"
common/network-common/src/main/java/org/apache/spark/network/util/AbstractFileRegion.java:27:20: "transfered" is a misspelling of "transferred"
common/unsafe/src/test/scala/org/apache/spark/unsafe/types/UTF8StringPropertyCheckSuite.scala:195:15: "orgin" is a misspelling of "origin"
core/src/main/scala/org/apache/spark/api/python/PythonRDD.scala:621:39: "gauranteed" is a misspelling of "guaranteed"
core/src/main/scala/org/apache/spark/status/storeTypes.scala:113:29: "ect" is a misspelling of "etc"
core/src/main/scala/org/apache/spark/storage/DiskStore.scala:282:18: "transfered" is a misspelling of "transferred"
core/src/main/scala/org/apache/spark/util/ListenerBus.scala:64:17: "overriden" is a misspelling of "overridden"
core/src/test/scala/org/apache/spark/ShuffleSuite.scala:211:7: "substracted" is a misspelling of "subtracted"
core/src/test/scala/org/apache/spark/scheduler/DAGSchedulerSuite.scala:1922:49: "agriculteur" is a misspelling of "agriculture"
core/src/test/scala/org/apache/spark/scheduler/DAGSchedulerSuite.scala:2468:84: "truely" is a misspelling of "truly"
core/src/test/scala/org/apache/spark/storage/FlatmapIteratorSuite.scala:25:18: "persistance" is a misspelling of "persistence"
core/src/test/scala/org/apache/spark/storage/FlatmapIteratorSuite.scala:26:69: "persistance" is a misspelling of "persistence"
data/streaming/AFINN-111.txt:1219:0: "humerous" is a misspelling of "humorous"
dev/run-pip-tests:55:28: "enviroments" is a misspelling of "environments"
dev/run-pip-tests:91:37: "virutal" is a misspelling of "virtual"
dev/merge_spark_pr.py:377:72: "accross" is a misspelling of "across"
dev/merge_spark_pr.py:378:66: "accross" is a misspelling of "across"
dev/run-pip-tests:126:25: "enviroments" is a misspelling of "environments"
docs/configuration.md:1830:82: "overriden" is a misspelling of "overridden"
docs/structured-streaming-programming-guide.md:525:45: "processs" is a misspelling of "processes"
docs/structured-streaming-programming-guide.md:1165:61: "BETWEN" is a misspelling of "BETWEEN"
docs/sql-programming-guide.md:1891:810: "behaivor" is a misspelling of "behavior"
examples/src/main/python/sql/arrow.py:98:8: "substract" is a misspelling of "subtract"
examples/src/main/python/sql/arrow.py:103:27: "substract" is a misspelling of "subtract"
licenses/LICENSE-heapq.txt:5:63: "Stichting" is a misspelling of "Stitching"
licenses/LICENSE-heapq.txt:6:2: "Mathematisch" is a misspelling of "Mathematics"
licenses/LICENSE-heapq.txt:262:29: "Stichting" is a misspelling of "Stitching"
licenses/LICENSE-heapq.txt:262:39: "Mathematisch" is a misspelling of "Mathematics"
licenses/LICENSE-heapq.txt:269:49: "Stichting" is a misspelling of "Stitching"
licenses/LICENSE-heapq.txt:269:59: "Mathematisch" is a misspelling of "Mathematics"
licenses/LICENSE-heapq.txt:274:2: "STICHTING" is a misspelling of "STITCHING"
licenses/LICENSE-heapq.txt:274:12: "MATHEMATISCH" is a misspelling of "MATHEMATICS"
licenses/LICENSE-heapq.txt:276:29: "STICHTING" is a misspelling of "STITCHING"
licenses/LICENSE-heapq.txt:276:39: "MATHEMATISCH" is a misspelling of "MATHEMATICS"
licenses-binary/LICENSE-heapq.txt:5:63: "Stichting" is a misspelling of "Stitching"
licenses-binary/LICENSE-heapq.txt:6:2: "Mathematisch" is a misspelling of "Mathematics"
licenses-binary/LICENSE-heapq.txt:262:29: "Stichting" is a misspelling of "Stitching"
licenses-binary/LICENSE-heapq.txt:262:39: "Mathematisch" is a misspelling of "Mathematics"
licenses-binary/LICENSE-heapq.txt:269:49: "Stichting" is a misspelling of "Stitching"
licenses-binary/LICENSE-heapq.txt:269:59: "Mathematisch" is a misspelling of "Mathematics"
licenses-binary/LICENSE-heapq.txt:274:2: "STICHTING" is a misspelling of "STITCHING"
licenses-binary/LICENSE-heapq.txt:274:12: "MATHEMATISCH" is a misspelling of "MATHEMATICS"
licenses-binary/LICENSE-heapq.txt:276:29: "STICHTING" is a misspelling of "STITCHING"
licenses-binary/LICENSE-heapq.txt:276:39: "MATHEMATISCH" is a misspelling of "MATHEMATICS"
mllib/src/main/resources/org/apache/spark/ml/feature/stopwords/hungarian.txt:170:0: "teh" is a misspelling of "the"
mllib/src/main/resources/org/apache/spark/ml/feature/stopwords/portuguese.txt:53:0: "eles" is a misspelling of "eels"
mllib/src/main/scala/org/apache/spark/ml/stat/Summarizer.scala:99:20: "Euclidian" is a misspelling of "Euclidean"
mllib/src/main/scala/org/apache/spark/ml/stat/Summarizer.scala:539:11: "Euclidian" is a misspelling of "Euclidean"
mllib/src/main/scala/org/apache/spark/mllib/clustering/LDAOptimizer.scala:77:36: "Teh" is a misspelling of "The"
mllib/src/main/scala/org/apache/spark/mllib/clustering/StreamingKMeans.scala:230:24: "inital" is a misspelling of "initial"
mllib/src/main/scala/org/apache/spark/mllib/stat/MultivariateOnlineSummarizer.scala:276:9: "Euclidian" is a misspelling of "Euclidean"
mllib/src/test/scala/org/apache/spark/ml/clustering/KMeansSuite.scala:237:26: "descripiton" is a misspelling of "descriptions"
python/pyspark/find_spark_home.py:30:13: "enviroment" is a misspelling of "environment"
python/pyspark/context.py:937:12: "supress" is a misspelling of "suppress"
python/pyspark/context.py:938:12: "supress" is a misspelling of "suppress"
python/pyspark/context.py:939:12: "supress" is a misspelling of "suppress"
python/pyspark/context.py:940:12: "supress" is a misspelling of "suppress"
python/pyspark/heapq3.py:6:63: "Stichting" is a misspelling of "Stitching"
python/pyspark/heapq3.py:7:2: "Mathematisch" is a misspelling of "Mathematics"
python/pyspark/heapq3.py:263:29: "Stichting" is a misspelling of "Stitching"
python/pyspark/heapq3.py:263:39: "Mathematisch" is a misspelling of "Mathematics"
python/pyspark/heapq3.py:270:49: "Stichting" is a misspelling of "Stitching"
python/pyspark/heapq3.py:270:59: "Mathematisch" is a misspelling of "Mathematics"
python/pyspark/heapq3.py:275:2: "STICHTING" is a misspelling of "STITCHING"
python/pyspark/heapq3.py:275:12: "MATHEMATISCH" is a misspelling of "MATHEMATICS"
python/pyspark/heapq3.py:277:29: "STICHTING" is a misspelling of "STITCHING"
python/pyspark/heapq3.py:277:39: "MATHEMATISCH" is a misspelling of "MATHEMATICS"
python/pyspark/heapq3.py:713:8: "probabilty" is a misspelling of "probability"
python/pyspark/ml/clustering.py:1038:8: "Currenlty" is a misspelling of "Currently"
python/pyspark/ml/stat.py:339:23: "Euclidian" is a misspelling of "Euclidean"
python/pyspark/ml/regression.py:1378:20: "paramter" is a misspelling of "parameter"
python/pyspark/mllib/stat/_statistics.py:262:8: "probabilty" is a misspelling of "probability"
python/pyspark/rdd.py:1363:32: "paramter" is a misspelling of "parameter"
python/pyspark/streaming/tests.py:825:42: "retuns" is a misspelling of "returns"
python/pyspark/sql/tests.py:768:29: "initalization" is a misspelling of "initialization"
python/pyspark/sql/tests.py:3616:31: "initalize" is a misspelling of "initialize"
resource-managers/mesos/src/main/scala/org/apache/spark/scheduler/cluster/mesos/MesosSchedulerBackendUtil.scala:120:39: "arbitary" is a misspelling of "arbitrary"
resource-managers/mesos/src/test/scala/org/apache/spark/deploy/mesos/MesosClusterDispatcherArgumentsSuite.scala:26:45: "sucessfully" is a misspelling of "successfully"
resource-managers/mesos/src/main/scala/org/apache/spark/scheduler/cluster/mesos/MesosSchedulerUtils.scala:358:27: "constaints" is a misspelling of "constraints"
resource-managers/yarn/src/test/scala/org/apache/spark/deploy/yarn/YarnClusterSuite.scala:111:24: "senstive" is a misspelling of "sensitive"
sql/catalyst/src/main/scala/org/apache/spark/sql/catalyst/catalog/SessionCatalog.scala:1063:5: "overwirte" is a misspelling of "overwrite"
sql/catalyst/src/main/scala/org/apache/spark/sql/catalyst/expressions/datetimeExpressions.scala:1348:17: "compatability" is a misspelling of "compatibility"
sql/catalyst/src/main/scala/org/apache/spark/sql/catalyst/plans/logical/basicLogicalOperators.scala:77:36: "paramter" is a misspelling of "parameter"
sql/catalyst/src/main/scala/org/apache/spark/sql/internal/SQLConf.scala:1374:22: "precendence" is a misspelling of "precedence"
sql/catalyst/src/test/scala/org/apache/spark/sql/catalyst/analysis/AnalysisSuite.scala:238:27: "unnecassary" is a misspelling of "unnecessary"
sql/catalyst/src/test/scala/org/apache/spark/sql/catalyst/expressions/ConditionalExpressionSuite.scala:212:17: "whn" is a misspelling of "when"
sql/core/src/main/scala/org/apache/spark/sql/execution/streaming/StreamingSymmetricHashJoinHelper.scala:147:60: "timestmap" is a misspelling of "timestamp"
sql/core/src/test/scala/org/apache/spark/sql/TPCDSQuerySuite.scala:150:45: "precentage" is a misspelling of "percentage"
sql/core/src/test/scala/org/apache/spark/sql/execution/datasources/csv/CSVInferSchemaSuite.scala:135:29: "infered" is a misspelling of "inferred"
sql/hive/src/test/resources/golden/udf_instr-1-2e76f819563dbaba4beb51e3a130b922:1:52: "occurance" is a misspelling of "occurrence"
sql/hive/src/test/resources/golden/udf_instr-2-32da357fc754badd6e3898dcc8989182:1:52: "occurance" is a misspelling of "occurrence"
sql/hive/src/test/resources/golden/udf_locate-1-6e41693c9c6dceea4d7fab4c02884e4e:1:63: "occurance" is a misspelling of "occurrence"
sql/hive/src/test/resources/golden/udf_locate-2-d9b5934457931447874d6bb7c13de478:1:63: "occurance" is a misspelling of "occurrence"
sql/hive/src/test/resources/golden/udf_translate-2-f7aa38a33ca0df73b7a1e6b6da4b7fe8:9:79: "occurence" is a misspelling of "occurrence"
sql/hive/src/test/resources/golden/udf_translate-2-f7aa38a33ca0df73b7a1e6b6da4b7fe8:13:110: "occurence" is a misspelling of "occurrence"
sql/hive/src/test/resources/ql/src/test/queries/clientpositive/annotate_stats_join.q:46:105: "distint" is a misspelling of "distinct"
sql/hive/src/test/resources/ql/src/test/queries/clientpositive/auto_sortmerge_join_11.q:29:3: "Currenly" is a misspelling of "Currently"
sql/hive/src/test/resources/ql/src/test/queries/clientpositive/avro_partitioned.q:72:15: "existant" is a misspelling of "existent"
sql/hive/src/test/resources/ql/src/test/queries/clientpositive/decimal_udf.q:25:3: "substraction" is a misspelling of "subtraction"
sql/hive/src/test/resources/ql/src/test/queries/clientpositive/groupby2_map_multi_distinct.q:16:51: "funtion" is a misspelling of "function"
sql/hive/src/test/resources/ql/src/test/queries/clientpositive/groupby_sort_8.q:15:30: "issueing" is a misspelling of "issuing"
sql/hive/src/test/scala/org/apache/spark/sql/sources/HadoopFsRelationTest.scala:669:52: "wiht" is a misspelling of "with"
sql/hive-thriftserver/src/main/java/org/apache/hive/service/cli/session/HiveSessionImpl.java:474:9: "Refering" is a misspelling of "Referring"
```
### after
```
$ misspell . | grep -v '.js'
common/network-common/src/main/java/org/apache/spark/network/util/AbstractFileRegion.java:27:20: "transfered" is a misspelling of "transferred"
core/src/main/scala/org/apache/spark/status/storeTypes.scala:113:29: "ect" is a misspelling of "etc"
core/src/test/scala/org/apache/spark/scheduler/DAGSchedulerSuite.scala:1922:49: "agriculteur" is a misspelling of "agriculture"
data/streaming/AFINN-111.txt:1219:0: "humerous" is a misspelling of "humorous"
licenses/LICENSE-heapq.txt:5:63: "Stichting" is a misspelling of "Stitching"
licenses/LICENSE-heapq.txt:6:2: "Mathematisch" is a misspelling of "Mathematics"
licenses/LICENSE-heapq.txt:262:29: "Stichting" is a misspelling of "Stitching"
licenses/LICENSE-heapq.txt:262:39: "Mathematisch" is a misspelling of "Mathematics"
licenses/LICENSE-heapq.txt:269:49: "Stichting" is a misspelling of "Stitching"
licenses/LICENSE-heapq.txt:269:59: "Mathematisch" is a misspelling of "Mathematics"
licenses/LICENSE-heapq.txt:274:2: "STICHTING" is a misspelling of "STITCHING"
licenses/LICENSE-heapq.txt:274:12: "MATHEMATISCH" is a misspelling of "MATHEMATICS"
licenses/LICENSE-heapq.txt:276:29: "STICHTING" is a misspelling of "STITCHING"
licenses/LICENSE-heapq.txt:276:39: "MATHEMATISCH" is a misspelling of "MATHEMATICS"
licenses-binary/LICENSE-heapq.txt:5:63: "Stichting" is a misspelling of "Stitching"
licenses-binary/LICENSE-heapq.txt:6:2: "Mathematisch" is a misspelling of "Mathematics"
licenses-binary/LICENSE-heapq.txt:262:29: "Stichting" is a misspelling of "Stitching"
licenses-binary/LICENSE-heapq.txt:262:39: "Mathematisch" is a misspelling of "Mathematics"
licenses-binary/LICENSE-heapq.txt:269:49: "Stichting" is a misspelling of "Stitching"
licenses-binary/LICENSE-heapq.txt:269:59: "Mathematisch" is a misspelling of "Mathematics"
licenses-binary/LICENSE-heapq.txt:274:2: "STICHTING" is a misspelling of "STITCHING"
licenses-binary/LICENSE-heapq.txt:274:12: "MATHEMATISCH" is a misspelling of "MATHEMATICS"
licenses-binary/LICENSE-heapq.txt:276:29: "STICHTING" is a misspelling of "STITCHING"
licenses-binary/LICENSE-heapq.txt:276:39: "MATHEMATISCH" is a misspelling of "MATHEMATICS"
mllib/src/main/resources/org/apache/spark/ml/feature/stopwords/hungarian.txt:170:0: "teh" is a misspelling of "the"
mllib/src/main/resources/org/apache/spark/ml/feature/stopwords/portuguese.txt:53:0: "eles" is a misspelling of "eels"
mllib/src/main/scala/org/apache/spark/ml/stat/Summarizer.scala:99:20: "Euclidian" is a misspelling of "Euclidean"
mllib/src/main/scala/org/apache/spark/ml/stat/Summarizer.scala:539:11: "Euclidian" is a misspelling of "Euclidean"
mllib/src/main/scala/org/apache/spark/mllib/clustering/LDAOptimizer.scala:77:36: "Teh" is a misspelling of "The"
mllib/src/main/scala/org/apache/spark/mllib/stat/MultivariateOnlineSummarizer.scala:276:9: "Euclidian" is a misspelling of "Euclidean"
python/pyspark/heapq3.py:6:63: "Stichting" is a misspelling of "Stitching"
python/pyspark/heapq3.py:7:2: "Mathematisch" is a misspelling of "Mathematics"
python/pyspark/heapq3.py:263:29: "Stichting" is a misspelling of "Stitching"
python/pyspark/heapq3.py:263:39: "Mathematisch" is a misspelling of "Mathematics"
python/pyspark/heapq3.py:270:49: "Stichting" is a misspelling of "Stitching"
python/pyspark/heapq3.py:270:59: "Mathematisch" is a misspelling of "Mathematics"
python/pyspark/heapq3.py:275:2: "STICHTING" is a misspelling of "STITCHING"
python/pyspark/heapq3.py:275:12: "MATHEMATISCH" is a misspelling of "MATHEMATICS"
python/pyspark/heapq3.py:277:29: "STICHTING" is a misspelling of "STITCHING"
python/pyspark/heapq3.py:277:39: "MATHEMATISCH" is a misspelling of "MATHEMATICS"
python/pyspark/ml/stat.py:339:23: "Euclidian" is a misspelling of "Euclidean"
```
Closes#22070 from seratch/fix-typo.
Authored-by: Kazuhiro Sera <seratch@gmail.com>
Signed-off-by: Sean Owen <srowen@gmail.com>
## What changes were proposed in this pull request?
In this PR metrics are introduced for YARN. As up to now there was no metrics in the YARN module a new metric system is created with the name "applicationMaster".
To support both client and cluster mode the metric system lifecycle is bound to the AM.
## How was this patch tested?
Both client and cluster mode was tested manually.
Before the test on one of the YARN node spark-core was removed to cause the allocation failure.
Spark was started as (in case of client mode):
```
spark2-submit \
--class org.apache.spark.examples.SparkPi \
--conf "spark.yarn.blacklist.executor.launch.blacklisting.enabled=true" --conf "spark.blacklist.application.maxFailedExecutorsPerNode=2" --conf "spark.dynamicAllocation.enabled=true" --conf "spark.metrics.conf.*.sink.console.class=org.apache.spark.metrics.sink.ConsoleSink" \
--master yarn \
--deploy-mode client \
original-spark-examples_2.11-2.4.0-SNAPSHOT.jar \
1000
```
In both cases the YARN logs contained the new metrics as:
```
$ yarn logs --applicationId application_1529926424933_0015
...
-- Gauges ----------------------------------------------------------------------
application_1531751594108_0046.applicationMaster.numContainersPendingAllocate
value = 0
application_1531751594108_0046.applicationMaster.numExecutorsFailed
value = 3
application_1531751594108_0046.applicationMaster.numExecutorsRunning
value = 9
application_1531751594108_0046.applicationMaster.numLocalityAwareTasks
value = 0
application_1531751594108_0046.applicationMaster.numReleasedContainers
value = 0
...
```
Author: “attilapiros” <piros.attila.zsolt@gmail.com>
Author: Attila Zsolt Piros <2017933+attilapiros@users.noreply.github.com>
Closes#21635 from attilapiros/SPARK-24594.
## What changes were proposed in this pull request?
[SPARK-24182](https://github.com/apache/spark/pull/21243) changed the `logApplicationReport` from `false` to `true`. This pr revert it to `false`. otherwise `spark-shell` will show noisy log output:
```java
...
18/07/16 04:46:25 INFO Client: Application report for application_1530676576026_54551 (state: RUNNING)
18/07/16 04:46:26 INFO Client: Application report for application_1530676576026_54551 (state: RUNNING)
...
```
Closes https://github.com/apache/spark/pull/21827
## How was this patch tested?
manual tests
Author: Yuming Wang <yumwang@ebay.com>
Closes#21784 from wangyum/SPARK-24182.
…rEnv properly
Running in yarn cluster mode and trying to set pythonpath via spark.yarn.appMasterEnv.PYTHONPATH doesn't work.
the yarn Client code looks at the env variables:
val pythonPathStr = (sys.env.get("PYTHONPATH") ++ pythonPath)
But when you set spark.yarn.appMasterEnv it puts it into the local env.
So the python path set in spark.yarn.appMasterEnv isn't properly set.
You can work around if you are running in cluster mode by setting it on the client like:
PYTHONPATH=./addon/python/ spark-submit
## What changes were proposed in this pull request?
In Client.scala, PYTHONPATH was being overridden, so changed code to append values to PYTHONPATH instead of overriding them.
## How was this patch tested?
Added log statements to ApplicationMaster.scala to check for environment variable PYTHONPATH, ran a spark job in cluster mode before the change and verified the issue. Performed the same test after the change and verified the fix.
Author: pgandhi <pgandhi@oath.com>
Closes#21468 from pgandhi999/SPARK-22151.
Because the way YARN executes commands via bash -c, everything needs
to be quoted so that the whole command is fully contained inside a
bash string and is interpreted correctly when the string is read by
bash. This is a bit different than the quoting done when executing
things as if typing in a bash shell.
Tweaked unit tests to exercise the bad behavior, which would cause
existing tests to time out without the fix. Also tested on a real
cluster, verifying the shell script created by YARN to run the
container.
Author: Marcelo Vanzin <vanzin@cloudera.com>
Closes#21476 from vanzin/SPARK-24446.
## What changes were proposed in this pull request?
This change extends YARN resource allocation handling with blacklisting functionality.
This handles cases when node is messed up or misconfigured such that a container won't launch on it. Before this change backlisting only focused on task execution but this change introduces YarnAllocatorBlacklistTracker which tracks allocation failures per host (when enabled via "spark.yarn.blacklist.executor.launch.blacklisting.enabled").
## How was this patch tested?
### With unit tests
Including a new suite: YarnAllocatorBlacklistTrackerSuite.
#### Manually
It was tested on a cluster by deleting the Spark jars on one of the node.
#### Behaviour before these changes
Starting Spark as:
```
spark2-shell --master yarn --deploy-mode client --num-executors 4 --conf spark.executor.memory=4g --conf "spark.yarn.max.executor.failures=6"
```
Log is:
```
18/04/12 06:49:36 INFO yarn.ApplicationMaster: Final app status: FAILED, exitCode: 11, (reason: Max number of executor failures (6) reached)
18/04/12 06:49:39 INFO yarn.ApplicationMaster: Unregistering ApplicationMaster with FAILED (diag message: Max number of executor failures (6) reached)
18/04/12 06:49:39 INFO impl.AMRMClientImpl: Waiting for application to be successfully unregistered.
18/04/12 06:49:39 INFO yarn.ApplicationMaster: Deleting staging directory hdfs://apiros-1.gce.test.com:8020/user/systest/.sparkStaging/application_1523459048274_0016
18/04/12 06:49:39 INFO util.ShutdownHookManager: Shutdown hook called
```
#### Behaviour after these changes
Starting Spark as:
```
spark2-shell --master yarn --deploy-mode client --num-executors 4 --conf spark.executor.memory=4g --conf "spark.yarn.max.executor.failures=6" --conf "spark.yarn.blacklist.executor.launch.blacklisting.enabled=true"
```
And the log is:
```
18/04/13 05:37:43 INFO yarn.YarnAllocator: Will request 1 executor container(s), each with 1 core(s) and 4505 MB memory (including 409 MB of overhead)
18/04/13 05:37:43 INFO yarn.YarnAllocator: Submitted 1 unlocalized container requests.
18/04/13 05:37:43 INFO yarn.YarnAllocator: Launching container container_1523459048274_0025_01_000008 on host apiros-4.gce.test.com for executor with ID 6
18/04/13 05:37:43 INFO yarn.YarnAllocator: Received 1 containers from YARN, launching executors on 1 of them.
18/04/13 05:37:43 INFO yarn.YarnAllocator: Completed container container_1523459048274_0025_01_000007 on host: apiros-4.gce.test.com (state: COMPLETE, exit status: 1)
18/04/13 05:37:43 INFO yarn.YarnAllocatorBlacklistTracker: blacklisting host as YARN allocation failed: apiros-4.gce.test.com
18/04/13 05:37:43 INFO yarn.YarnAllocatorBlacklistTracker: adding nodes to YARN application master's blacklist: List(apiros-4.gce.test.com)
18/04/13 05:37:43 WARN yarn.YarnAllocator: Container marked as failed: container_1523459048274_0025_01_000007 on host: apiros-4.gce.test.com. Exit status: 1. Diagnostics: Exception from container-launch.
Container id: container_1523459048274_0025_01_000007
Exit code: 1
Stack trace: ExitCodeException exitCode=1:
at org.apache.hadoop.util.Shell.runCommand(Shell.java:604)
at org.apache.hadoop.util.Shell.run(Shell.java:507)
at org.apache.hadoop.util.Shell$ShellCommandExecutor.execute(Shell.java:789)
at org.apache.hadoop.yarn.server.nodemanager.DefaultContainerExecutor.launchContainer(DefaultContainerExecutor.java:213)
at org.apache.hadoop.yarn.server.nodemanager.containermanager.launcher.ContainerLaunch.call(ContainerLaunch.java:302)
at org.apache.hadoop.yarn.server.nodemanager.containermanager.launcher.ContainerLaunch.call(ContainerLaunch.java:82)
at java.util.concurrent.FutureTask.run(FutureTask.java:266)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624)
at java.lang.Thread.run(Thread.java:748)
```
Where the most important part is:
```
18/04/13 05:37:43 INFO yarn.YarnAllocatorBlacklistTracker: blacklisting host as YARN allocation failed: apiros-4.gce.test.com
18/04/13 05:37:43 INFO yarn.YarnAllocatorBlacklistTracker: adding nodes to YARN application master's blacklist: List(apiros-4.gce.test.com)
```
And execution was continued (no shutdown called).
### Testing the backlisting of the whole cluster
Starting Spark with YARN blacklisting enabled then removing a the Spark core jar one by one from all the cluster nodes. Then executing a simple spark job which fails checking the yarn log the expected exit status is contained:
```
18/06/15 01:07:10 INFO yarn.ApplicationMaster: Final app status: FAILED, exitCode: 11, (reason: Due to executor failures all available nodes are blacklisted)
18/06/15 01:07:13 INFO util.ShutdownHookManager: Shutdown hook called
```
Author: “attilapiros” <piros.attila.zsolt@gmail.com>
Closes#21068 from attilapiros/SPARK-16630.
This PR adds a debugging log for YARN-specific credential providers which is loaded by service loader mechanism.
It took me a while to debug if it's actually loaded or not. I had to explicitly set the deprecated configuration and check if that's actually being loaded.
The change scope is manually tested. Logs are like:
```
Using the following builtin delegation token providers: hadoopfs, hive, hbase.
Using the following YARN-specific credential providers: yarn-test.
```
Author: hyukjinkwon <gurwls223@apache.org>
Closes#21466 from HyukjinKwon/minor-log.
Change-Id: I18e2fb8eeb3289b148f24c47bb3130a560a881cf
## What changes were proposed in this pull request?
In client side before context initialization specifically, .py file doesn't work in client side before context initialization when the application is a Python file. See below:
```
$ cat /home/spark/tmp.py
def testtest():
return 1
```
This works:
```
$ cat app.py
import pyspark
pyspark.sql.SparkSession.builder.getOrCreate()
import tmp
print("************************%s" % tmp.testtest())
$ ./bin/spark-submit --master yarn --deploy-mode client --py-files /home/spark/tmp.py app.py
...
************************1
```
but this doesn't:
```
$ cat app.py
import pyspark
import tmp
pyspark.sql.SparkSession.builder.getOrCreate()
print("************************%s" % tmp.testtest())
$ ./bin/spark-submit --master yarn --deploy-mode client --py-files /home/spark/tmp.py app.py
Traceback (most recent call last):
File "/home/spark/spark/app.py", line 2, in <module>
import tmp
ImportError: No module named tmp
```
### How did it happen?
In client mode specifically, the paths are being added into PythonRunner as are:
628c7b5179/core/src/main/scala/org/apache/spark/deploy/SparkSubmit.scala (L430)628c7b5179/core/src/main/scala/org/apache/spark/deploy/PythonRunner.scala (L49-L88)
The problem here is, .py file shouldn't be added as are since `PYTHONPATH` expects a directory or an archive like zip or egg.
### How does this PR fix?
We shouldn't simply just add its parent directory because other files in the parent directory could also be added into the `PYTHONPATH` in client mode before context initialization.
Therefore, we copy .py files into a temp directory for .py files and add it to `PYTHONPATH`.
## How was this patch tested?
Unit tests are added and manually tested in both standalond and yarn client modes with submit.
Author: hyukjinkwon <gurwls223@apache.org>
Closes#21426 from HyukjinKwon/SPARK-24384.
## What changes were proposed in this pull request?
Hadoop 3 introduces HDFS federation. This means that multiple namespaces are allowed on the same HDFS cluster. In Spark, we need to ask the delegation token for all the namenodes (for each namespace), otherwise accessing any other namespace different from the default one (for which we already fetch the delegation token) fails.
The PR adds the automatic discovery of all the namenodes related to all the namespaces available according to the configs in hdfs-site.xml.
## How was this patch tested?
manual tests in dockerized env
Author: Marco Gaido <marcogaido91@gmail.com>
Closes#21216 from mgaido91/SPARK-24149.
Instead of always throwing a generic exception when the AM fails,
print a generic error and throw the exception with the YARN
diagnostics containing the reason for the failure.
There was an issue with YARN sometimes providing a generic diagnostic
message, even though the AM provides a failure reason when
unregistering. That was happening because the AM was registering
too late, and if errors happened before the registration, YARN would
just create a generic "ExitCodeException" which wasn't very helpful.
Since most errors in this path are a result of not being able to
connect to the driver, this change modifies the AM registration
a bit so that the AM is registered before the connection to the
driver is established. That way, errors are properly propagated
through YARN back to the driver.
As part of that, I also removed the code that retried connections
to the driver from the client AM. At that point, the driver should
already be up and waiting for connections, so it's unlikely that
retrying would help - and in case it does, that means a flaky
network, which would mean problems would probably show up again.
The effect of that is that connection-related errors are reported
back to the driver much faster now (through the YARN report).
One thing to note is that there seems to be a race on the YARN
side that causes a report to be sent to the client without the
corresponding diagnostics string from the AM; the diagnostics are
available later from the RM web page. For that reason, the generic
error messages are kept in the Spark scheduler code, to help
guide users to a way of debugging their failure.
Also of note is that if YARN's max attempts configuration is lower
than Spark's, Spark will not unregister the AM with a proper
diagnostics message. Unfortunately there seems to be no way to
unregister the AM and still allow further re-attempts to happen.
Testing:
- existing unit tests
- some of our integration tests
- hardcoded an invalid driver address in the code and verified
the error in the shell. e.g.
```
scala> 18/05/04 15:09:34 ERROR cluster.YarnClientSchedulerBackend: YARN application has exited unexpectedly with state FAILED! Check the YARN application logs for more details.
18/05/04 15:09:34 ERROR cluster.YarnClientSchedulerBackend: Diagnostics message: Uncaught exception: org.apache.spark.SparkException: Exception thrown in awaitResult:
<AM stack trace>
Caused by: java.io.IOException: Failed to connect to localhost/127.0.0.1:1234
<More stack trace>
```
Author: Marcelo Vanzin <vanzin@cloudera.com>
Closes#21243 from vanzin/SPARK-24182.
## What changes were proposed in this pull request?
Added support to specify the 'spark.executor.extraJavaOptions' value in terms of the `{{APP_ID}}` and/or `{{EXECUTOR_ID}}`, `{{APP_ID}}` will be replaced by Application Id and `{{EXECUTOR_ID}}` will be replaced by Executor Id while starting the executor.
## How was this patch tested?
I have verified this by checking the executor process command and gc logs. I verified the same in different deployment modes(Standalone, YARN, Mesos) client and cluster modes.
Author: Devaraj K <devaraj@apache.org>
Closes#21088 from devaraj-kavali/SPARK-24003.
## What changes were proposed in this pull request?
When a user specifies the wrong class -- or, in fact, a class instead of an object -- Spark throws an NPE which is not useful for debugging. This was reported in [SPARK-23830](https://issues.apache.org/jira/browse/SPARK-23830). This PR adds a check to ensure the main method was found and logs a useful error in the event that it's null.
## How was this patch tested?
* Unit tests + Manual testing
* The scope of the changes is very limited
Author: eric-maynard <emaynard@cloudera.com>
Author: Eric Maynard <emaynard@cloudera.com>
Closes#21168 from eric-maynard/feature/SPARK-23830.
## What changes were proposed in this pull request?
Log stacktrace for uncaught exception
## How was this patch tested?
UT and manually test
Author: zhoukang <zhoukang199191@gmail.com>
Closes#21151 from caneGuy/zhoukang/log-stacktrace.
## What changes were proposed in this pull request?
We propose not to hard-code the RPC port in the AM registration.
## How was this patch tested?
Tested application reports from a pseudo-distributed cluster
```
18/04/10 14:56:21 INFO Client:
client token: N/A
diagnostics: N/A
ApplicationMaster host: localhost
ApplicationMaster RPC port: 58338
queue: default
start time: 1523397373659
final status: UNDEFINED
tracking URL: http://localhost:8088/proxy/application_1523370127531_0016/
```
Author: Gera Shegalov <gera@apache.org>
Closes#21047 from gerashegalov/gera/am-to-rm-nmhost.
## What changes were proposed in this pull request?
`YarnAllocator` uses `numExecutorsRunning` to track the number of running executor. `numExecutorsRunning` is used to check if there're executors missing and need to allocate more.
In current code, `numExecutorsRunning` can be negative when driver asks to kill a same idle executor multiple times.
## How was this patch tested?
UT added
Author: jinxing <jinxing6042@126.com>
Closes#20781 from jinxing64/SPARK-23637.
Currently, the Spark AM relies on the initial set of tokens created by
the submission client to be able to talk to HDFS and other services that
require delegation tokens. This means that after those tokens expire, a
new AM will fail to start (e.g. when there is an application failure and
re-attempts are enabled).
This PR makes it so that the first thing the AM does when the user provides
a principal and keytab is to create new delegation tokens for use. This
makes sure that the AM can be started irrespective of how old the original
token set is. It also allows all of the token management to be done by the
AM - there is no need for the submission client to set configuration values
to tell the AM when to renew tokens.
Note that even though in this case the AM will not be using the delegation
tokens created by the submission client, those tokens still need to be provided
to YARN, since they are used to do log aggregation.
To be able to re-use the code in the AMCredentialRenewal for the above
purposes, I refactored that class a bit so that it can fetch tokens into
a pre-defined UGI, insted of always logging in.
Another issue with re-attempts is that, after the fix that allows the AM
to restart correctly, new executors would get confused about when to
update credentials, because the credential updater used the update time
initially set up by the submission code. This could make the executor
fail to update credentials in time, since that value would be very out
of date in the situation described in the bug.
To fix that, I changed the YARN code to use the new RPC-based mechanism
for distributing tokens to executors. This allowed the old credential
updater code to be removed, and a lot of code in the renewer to be
simplified.
I also made two currently hardcoded values (the renewal time ratio, and
the retry wait) configurable; while this probably never needs to be set
by anyone in a production environment, it helps with testing; that's also
why they're not documented.
Tested on real cluster with a specially crafted application to test this
functionality: checked proper access to HDFS, Hive and HBase in cluster
mode with token renewal on and AM restarts. Tested things still work in
client mode too.
Author: Marcelo Vanzin <vanzin@cloudera.com>
Closes#20657 from vanzin/SPARK-23361.
## What changes were proposed in this pull request?
Yarn throws the following exception in cluster mode when the application is really small:
```
18/03/07 23:34:22 WARN netty.NettyRpcEnv: Ignored failure: java.util.concurrent.RejectedExecutionException: Task java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask7c974942 rejected from java.util.concurrent.ScheduledThreadPoolExecutor1eea9d2d[Terminated, pool size = 0, active threads = 0, queued tasks = 0, completed tasks = 0]
18/03/07 23:34:22 ERROR yarn.ApplicationMaster: Uncaught exception:
org.apache.spark.SparkException: Exception thrown in awaitResult:
at org.apache.spark.util.ThreadUtils$.awaitResult(ThreadUtils.scala:205)
at org.apache.spark.rpc.RpcTimeout.awaitResult(RpcTimeout.scala:75)
at org.apache.spark.rpc.RpcEndpointRef.askSync(RpcEndpointRef.scala:92)
at org.apache.spark.rpc.RpcEndpointRef.askSync(RpcEndpointRef.scala:76)
at org.apache.spark.deploy.yarn.YarnAllocator.<init>(YarnAllocator.scala:102)
at org.apache.spark.deploy.yarn.YarnRMClient.register(YarnRMClient.scala:77)
at org.apache.spark.deploy.yarn.ApplicationMaster.registerAM(ApplicationMaster.scala:450)
at org.apache.spark.deploy.yarn.ApplicationMaster.runDriver(ApplicationMaster.scala:493)
at org.apache.spark.deploy.yarn.ApplicationMaster.org$apache$spark$deploy$yarn$ApplicationMaster$$runImpl(ApplicationMaster.scala:345)
at org.apache.spark.deploy.yarn.ApplicationMaster$$anonfun$run$2.apply$mcV$sp(ApplicationMaster.scala:260)
at org.apache.spark.deploy.yarn.ApplicationMaster$$anonfun$run$2.apply(ApplicationMaster.scala:260)
at org.apache.spark.deploy.yarn.ApplicationMaster$$anonfun$run$2.apply(ApplicationMaster.scala:260)
at org.apache.spark.deploy.yarn.ApplicationMaster$$anon$5.run(ApplicationMaster.scala:810)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAs(Subject.java:422)
at org.apache.hadoop.security.UserGroupInformation.doAs(UserGroupInformation.java:1920)
at org.apache.spark.deploy.yarn.ApplicationMaster.doAsUser(ApplicationMaster.scala:809)
at org.apache.spark.deploy.yarn.ApplicationMaster.run(ApplicationMaster.scala:259)
at org.apache.spark.deploy.yarn.ApplicationMaster$.main(ApplicationMaster.scala:834)
at org.apache.spark.deploy.yarn.ApplicationMaster.main(ApplicationMaster.scala)
Caused by: org.apache.spark.rpc.RpcEnvStoppedException: RpcEnv already stopped.
at org.apache.spark.rpc.netty.Dispatcher.postMessage(Dispatcher.scala:158)
at org.apache.spark.rpc.netty.Dispatcher.postLocalMessage(Dispatcher.scala:135)
at org.apache.spark.rpc.netty.NettyRpcEnv.ask(NettyRpcEnv.scala:229)
at org.apache.spark.rpc.netty.NettyRpcEndpointRef.ask(NettyRpcEnv.scala:523)
at org.apache.spark.rpc.RpcEndpointRef.askSync(RpcEndpointRef.scala:91)
... 17 more
18/03/07 23:34:22 INFO yarn.ApplicationMaster: Final app status: FAILED, exitCode: 13, (reason: Uncaught exception: org.apache.spark.SparkException: Exception thrown in awaitResult: )
```
Example application:
```
object ExampleApp {
def main(args: Array[String]): Unit = {
val conf = new SparkConf().setAppName("ExampleApp")
val sc = new SparkContext(conf)
try {
// Do nothing
} finally {
sc.stop()
}
}
```
This PR pauses user class thread after `SparkContext` created and keeps it so until application master initialises properly.
## How was this patch tested?
Automated: Existing unit tests
Manual: Application submitted into small cluster
Author: Gabor Somogyi <gabor.g.somogyi@gmail.com>
Closes#20807 from gaborgsomogyi/SPARK-23660.
## What changes were proposed in this pull request?
In the current Spark on YARN code, AM always will copy and overwrite its env variables to executors, so we cannot set different values for executors.
To reproduce issue, user could start spark-shell like:
```
./bin/spark-shell --master yarn-client --conf spark.executorEnv.SPARK_ABC=executor_val --conf spark.yarn.appMasterEnv.SPARK_ABC=am_val
```
Then check executor env variables by
```
sc.parallelize(1 to 1).flatMap \{ i => sys.env.toSeq }.collect.foreach(println)
```
We will always get `am_val` instead of `executor_val`. So we should not let AM to overwrite specifically set executor env variables.
## How was this patch tested?
Added UT and tested in local cluster.
Author: jerryshao <sshao@hortonworks.com>
Closes#20799 from jerryshao/SPARK-23635.
This change restores functionality that was inadvertently removed as part
of the fix for SPARK-22372.
Also modified an existing unit test to make sure the feature works as intended.
Author: Marcelo Vanzin <vanzin@cloudera.com>
Closes#20776 from vanzin/SPARK-23630.
## What changes were proposed in this pull request?
Include stacktrace in the diagnostics message upon abnormal unregister from RM
## How was this patch tested?
Tested with a failing job, and confirmed a stacktrace in the client output and YARN webUI.
Author: Gera Shegalov <gera@apache.org>
Closes#20470 from gerashegalov/gera/stacktrace-diagnostics.
Third time is the charm?
There was still a race that was left in previous attempts. If the handle
closes the connection, the close() implementation would clean up state
that would prevent the thread from waiting on the connection thread to
finish. That could cause the race causing the test flakiness reported
in the bug.
The fix is to move the "wait for connection thread" code to a separate
close method that is used by the handle; that also simplifies the code
a bit and makes it also easier to follow.
I included an unrelated, but correct, change to a YARN test so that
it triggers when the PR is built.
Tested by inserting a sleep in the connection thread to mimic the race;
test failed reliably with the sleep, passes now. (Sleep not included in
the patch.) Also ran YARN tests to make sure.
Author: Marcelo Vanzin <vanzin@cloudera.com>
Closes#20388 from vanzin/SPARK-23020.
The race in the code is because the handle might update
its state to the wrong state if the connection handling
thread is still processing incoming data; so the handle
needs to wait for the connection to finish up before
checking the final state.
The race in the test is because when waiting for a handle
to reach a final state, the waitFor() method needs to wait
until all handle state is updated (which also includes
waiting for the connection thread above to finish).
Otherwise, waitFor() may return too early, which would cause
a bunch of different races (like the listener not being yet
notified of the state change, or being in the middle of
being notified, or the handle not being properly disposed
and causing postChecks() to assert).
On top of that I found, by code inspection, a couple of
potential races that could make a handle end up in the
wrong state when being killed.
The original version of this fix introduced the flipped
version of the first race described above; the connection
closing might override the handle state before the
handle might have a chance to do cleanup. The fix there
is to only dispose of the handle from the connection
when there is an error, and let the handle dispose
itself in the normal case.
The fix also caused a bug in YarnClusterSuite to be surfaced;
the code was checking for a file in the classpath that was
not expected to be there in client mode. Because of the above
issues, the error was not propagating correctly and the (buggy)
test was incorrectly passing.
Tested by running the existing unit tests a lot (and not
seeing the errors I was seeing before).
Author: Marcelo Vanzin <vanzin@cloudera.com>
Closes#20297 from vanzin/SPARK-23020.
## What changes were proposed in this pull request?
This patch bumps the master branch version to `2.4.0-SNAPSHOT`.
## How was this patch tested?
N/A
Author: gatorsmile <gatorsmile@gmail.com>
Closes#20222 from gatorsmile/bump24.
## What changes were proposed in this pull request?
Two filesystems comparing does not consider the authority of URI. This is specific for
WASB file storage system, where userInfo is honored to differentiate filesystems.
For example: wasbs://user1xyz.net, wasbs://user2xyz.net would consider as two filesystem.
Therefore, we have to add the authority to compare two filesystem, and two filesystem with different authority can not be the same FS.
Please review http://spark.apache.org/contributing.html before opening a pull request.
Author: Mingjie Tang <mtang@hortonworks.com>
Closes#19885 from merlintang/EAR-7377.
## What changes were proposed in this pull request?
Register spark.history.ui.port as a known spark conf to be used in substitution expressions even if it's not set explicitly.
## How was this patch tested?
Added unit test to demonstrate the issue
Author: Gera Shegalov <gera@apache.org>
Author: Gera Shegalov <gshegalov@salesforce.com>
Closes#20098 from gerashegalov/gera/register-SHS-port-conf.
This change adds a new launcher that allows applications to be run
in a separate thread in the same process as the calling code. To
achieve that, some code from the child process implementation was
moved to abstract classes that implement the common functionality,
and the new launcher inherits from those.
The new launcher was added as a new class, instead of implemented
as a new option to the existing SparkLauncher, to avoid ambigous
APIs. For example, SparkLauncher has ways to set the child app's
environment, modify SPARK_HOME, or control the logging of the
child process, none of which apply to in-process apps.
The in-process launcher has limitations: it needs Spark in the
context class loader of the calling thread, and it's bound by
Spark's current limitation of a single client-mode application
per JVM. It also relies on the recently added SparkApplication
trait to make sure different apps don't mess up each other's
configuration, so config isolation is currently limited to cluster mode.
I also chose to keep the same socket-based communication for in-process
apps, even though it might be possible to avoid it for in-process
mode. That helps both implementations share more code.
Tested with new and existing unit tests, and with a simple app that
uses the launcher; also made sure the app ran fine with older launcher
jar to check binary compatibility.
Author: Marcelo Vanzin <vanzin@cloudera.com>
Closes#19591 from vanzin/SPARK-11035.
This PR contains implementation of the basic submission client for the cluster mode of Spark on Kubernetes. It's step 2 from the step-wise plan documented [here](https://github.com/apache-spark-on-k8s/spark/issues/441#issuecomment-330802935).
This addition is covered by the [SPIP](http://apache-spark-developers-list.1001551.n3.nabble.com/SPIP-Spark-on-Kubernetes-td22147.html) vote which passed on Aug 31.
This PR and #19468 together form a MVP of Spark on Kubernetes that allows users to run Spark applications that use resources locally within the driver and executor containers on Kubernetes 1.6 and up. Some changes on pom and build/test setup are copied over from #19468 to make this PR self contained and testable.
The submission client is mainly responsible for creating the Kubernetes pod that runs the Spark driver. It follows a step-based approach to construct the driver pod, as the code under the `submit.steps` package shows. The steps are orchestrated by `DriverConfigurationStepsOrchestrator`. `Client` creates the driver pod and waits for the application to complete if it's configured to do so, which is the case by default.
This PR also contains Dockerfiles of the driver and executor images. They are included because some of the environment variables set in the code would not make sense without referring to the Dockerfiles.
* The patch contains unit tests which are passing.
* Manual testing: ./build/mvn -Pkubernetes clean package succeeded.
* It is a subset of the entire changelist hosted at http://github.com/apache-spark-on-k8s/spark which is in active use in several organizations.
* There is integration testing enabled in the fork currently hosted by PepperData which is being moved over to RiseLAB CI.
* Detailed documentation on trying out the patch in its entirety is in: https://apache-spark-on-k8s.github.io/userdocs/running-on-kubernetes.html
cc rxin felixcheung mateiz (shepherd)
k8s-big-data SIG members & contributors: mccheah foxish ash211 ssuchter varunkatta kimoonkim erikerlandson tnachen ifilonenko liyinan926
Author: Yinan Li <liyinan926@gmail.com>
Closes#19717 from liyinan926/spark-kubernetes-4.
## What changes were proposed in this pull request?
I see the two instances where the exception is occurring.
**Instance 1:**
```
17/11/10 15:49:32 ERROR util.Utils: Uncaught exception in thread driver-revive-thread
org.apache.spark.SparkException: Could not find CoarseGrainedScheduler.
at org.apache.spark.rpc.netty.Dispatcher.postMessage(Dispatcher.scala:160)
at org.apache.spark.rpc.netty.Dispatcher.postOneWayMessage(Dispatcher.scala:140)
at org.apache.spark.rpc.netty.NettyRpcEnv.send(NettyRpcEnv.scala:187)
at org.apache.spark.rpc.netty.NettyRpcEndpointRef.send(NettyRpcEnv.scala:521)
at org.apache.spark.scheduler.cluster.CoarseGrainedSchedulerBackend$DriverEndpoint$$anon$1$$anonfun$run$1$$anonfun$apply$mcV$sp$1.apply(CoarseGrainedSchedulerBackend.scala:125)
at org.apache.spark.scheduler.cluster.CoarseGrainedSchedulerBackend$DriverEndpoint$$anon$1$$anonfun$run$1$$anonfun$apply$mcV$sp$1.apply(CoarseGrainedSchedulerBackend.scala:125)
at scala.Option.foreach(Option.scala:257)
at org.apache.spark.scheduler.cluster.CoarseGrainedSchedulerBackend$DriverEndpoint$$anon$1$$anonfun$run$1.apply$mcV$sp(CoarseGrainedSchedulerBackend.scala:125)
at org.apache.spark.util.Utils$.tryLogNonFatalError(Utils.scala:1344)
at org.apache.spark.scheduler.cluster.CoarseGrainedSchedulerBackend$DriverEndpoint$$anon$1.run(CoarseGrainedSchedulerBackend.scala:124)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:511)
at java.util.concurrent.FutureTask.runAndReset(FutureTask.java:308)
at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$301(ScheduledThreadPoolExecutor.java:180)
at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:294)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617)
at java.lang.Thread.run(Thread.java:745)
```
In CoarseGrainedSchedulerBackend.scala, driver-revive-thread starts with DriverEndpoint.onStart() and keeps sending the ReviveOffers messages periodically till it gets shutdown as part DriverEndpoint.onStop(). There is no proper coordination between the driver-revive-thread(shutdown) and the RpcEndpoint unregister, RpcEndpoint unregister happens first and then driver-revive-thread shuts down as part of DriverEndpoint.onStop(), In-between driver-revive-thread may try to send the ReviveOffers message which is leading to the above exception.
To fix this issue, this PR moves the shutting down of driver-revive-thread to CoarseGrainedSchedulerBackend.stop() which executes before the DriverEndpoint unregister.
**Instance 2:**
```
17/11/10 16:31:38 ERROR cluster.YarnSchedulerBackend$YarnSchedulerEndpoint: Error requesting driver to remove executor 1 for reason Executor for container container_1508535467865_0226_01_000002 exited because of a YARN event (e.g., pre-emption) and not because of an error in the running job.
org.apache.spark.SparkException: Could not find CoarseGrainedScheduler.
at org.apache.spark.rpc.netty.Dispatcher.postMessage(Dispatcher.scala:160)
at org.apache.spark.rpc.netty.Dispatcher.postLocalMessage(Dispatcher.scala:135)
at org.apache.spark.rpc.netty.NettyRpcEnv.ask(NettyRpcEnv.scala:229)
at org.apache.spark.rpc.netty.NettyRpcEndpointRef.ask(NettyRpcEnv.scala:516)
at org.apache.spark.rpc.RpcEndpointRef.ask(RpcEndpointRef.scala:63)
at org.apache.spark.scheduler.cluster.YarnSchedulerBackend$YarnSchedulerEndpoint$$anonfun$receive$1.applyOrElse(YarnSchedulerBackend.scala:269)
at org.apache.spark.rpc.netty.Inbox$$anonfun$process$1.apply$mcV$sp(Inbox.scala:117)
at org.apache.spark.rpc.netty.Inbox.safelyCall(Inbox.scala:205)
at org.apache.spark.rpc.netty.Inbox.process(Inbox.scala:101)
at org.apache.spark.rpc.netty.Dispatcher$MessageLoop.run(Dispatcher.scala:221)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617)
at java.lang.Thread.run(Thread.java:745)
```
Here YarnDriverEndpoint tries to send remove executor messages after the Yarn scheduler backend service stop, which is leading to the above exception. To avoid the above exception,
1) We may add a condition(which checks whether service has stopped or not) before sending executor remove message
2) Add a warn log message in onFailure case when the service is already stopped
In this PR, chosen the 2) option which adds a log message in the case of onFailure without the exception stack trace since the option 1) would need to to go through for every remove executor message.
## How was this patch tested?
I verified it manually, I don't see these exceptions with the PR changes.
Author: Devaraj K <devaraj@apache.org>
Closes#19741 from devaraj-kavali/SPARK-14228.
The main goal of this change is to allow multiple cluster-mode
submissions from the same JVM, without having them end up with
mixed configuration. That is done by extending the SparkApplication
trait, and doing so was reasonably trivial for standalone and
mesos modes.
For YARN mode, there was a complication. YARN used a "SPARK_YARN_MODE"
system property to control behavior indirectly in a whole bunch of
places, mainly in the SparkHadoopUtil / YarnSparkHadoopUtil classes.
Most of the changes here are removing that.
Since we removed support for Hadoop 1.x, some methods that lived in
YarnSparkHadoopUtil can now live in SparkHadoopUtil. The remaining
methods don't need to be part of the class, and can be called directly
from the YarnSparkHadoopUtil object, so now there's a single
implementation of SparkHadoopUtil.
There were two places in the code that relied on SPARK_YARN_MODE to
make decisions about YARN-specific functionality, and now explicitly check
the master from the configuration for that instead:
* fetching the external shuffle service port, which can come from the YARN
configuration.
* propagation of the authentication secret using Hadoop credentials. This also
was cleaned up a little to not need so many methods in `SparkHadoopUtil`.
With those out of the way, actually changing the YARN client
to extend SparkApplication was easy.
Tested with existing unit tests, and also by running YARN apps
with auth and kerberos both on and off in a real cluster.
Author: Marcelo Vanzin <vanzin@cloudera.com>
Closes#19631 from vanzin/SPARK-22372.
## What changes were proposed in this pull request?
This is a stripped down version of the `KubernetesClusterSchedulerBackend` for Spark with the following components:
- Static Allocation of Executors
- Executor Pod Factory
- Executor Recovery Semantics
It's step 1 from the step-wise plan documented [here](https://github.com/apache-spark-on-k8s/spark/issues/441#issuecomment-330802935).
This addition is covered by the [SPIP vote](http://apache-spark-developers-list.1001551.n3.nabble.com/SPIP-Spark-on-Kubernetes-td22147.html) which passed on Aug 31 .
## How was this patch tested?
- The patch contains unit tests which are passing.
- Manual testing: `./build/mvn -Pkubernetes clean package` succeeded.
- It is a **subset** of the entire changelist hosted in http://github.com/apache-spark-on-k8s/spark which is in active use in several organizations.
- There is integration testing enabled in the fork currently [hosted by PepperData](spark-k8s-jenkins.pepperdata.org:8080) which is being moved over to RiseLAB CI.
- Detailed documentation on trying out the patch in its entirety is in: https://apache-spark-on-k8s.github.io/userdocs/running-on-kubernetes.html
cc rxin felixcheung mateiz (shepherd)
k8s-big-data SIG members & contributors: mccheah ash211 ssuchter varunkatta kimoonkim erikerlandson liyinan926 tnachen ifilonenko
Author: Yinan Li <liyinan926@gmail.com>
Author: foxish <ramanathana@google.com>
Author: mcheah <mcheah@palantir.com>
Closes#19468 from foxish/spark-kubernetes-3.
## What changes were proposed in this pull request?
tl;dr: Add a class, `MesosHadoopDelegationTokenManager` that updates delegation tokens on a schedule on the behalf of Spark Drivers. Broadcast renewed credentials to the executors.
## The problem
We recently added Kerberos support to Mesos-based Spark jobs as well as Secrets support to the Mesos Dispatcher (SPARK-16742, SPARK-20812, respectively). However the delegation tokens have a defined expiration. This poses a problem for long running Spark jobs (e.g. Spark Streaming applications). YARN has a solution for this where a thread is scheduled to renew the tokens they reach 75% of their way to expiration. It then writes the tokens to HDFS for the executors to find (uses a monotonically increasing suffix).
## This solution
We replace the current method in `CoarseGrainedSchedulerBackend` which used to discard the token renewal time with a protected method `fetchHadoopDelegationTokens`. Now the individual cluster backends are responsible for overriding this method to fetch and manage token renewal. The delegation tokens themselves, are still part of the `CoarseGrainedSchedulerBackend` as before.
In the case of Mesos renewed Credentials are broadcasted to the executors. This maintains all transfer of Credentials within Spark (as opposed to Spark-to-HDFS). It also does not require any writing of Credentials to disk. It also does not require any GC of old files.
## How was this patch tested?
Manually against a Kerberized HDFS cluster.
Thank you for the reviews.
Author: ArtRand <arand@soe.ucsc.edu>
Closes#19272 from ArtRand/spark-21842-450-kerberos-ticket-renewal.
## What changes were proposed in this pull request?
Removed the unnecessary stagingDirPath null check in ApplicationMaster.cleanupStagingDir().
## How was this patch tested?
I verified with the existing test cases.
Author: Devaraj K <devaraj@apache.org>
Closes#19749 from devaraj-kavali/SPARK-22519.
## What changes were proposed in this pull request?
When I ran self contained sql apps, such as
```scala
import org.apache.spark.sql.SparkSession
object ShowHiveTables {
def main(args: Array[String]): Unit = {
val spark = SparkSession
.builder()
.appName("Show Hive Tables")
.enableHiveSupport()
.getOrCreate()
spark.sql("show tables").show()
spark.stop()
}
}
```
with **yarn cluster** mode and `hive-site.xml` correctly within `$SPARK_HOME/conf`,they failed to connect the right hive metestore for not seeing hive-site.xml in AM/Driver's classpath.
Although submitting them with `--files/--jars local/path/to/hive-site.xml` or puting it to `$HADOOP_CONF_DIR/YARN_CONF_DIR` can make these apps works well in cluster mode as client mode, according to the official doc, see http://spark.apache.org/docs/latest/sql-programming-guide.html#hive-tables
> Configuration of Hive is done by placing your hive-site.xml, core-site.xml (for security configuration), and hdfs-site.xml (for HDFS configuration) file in conf/.
We may respect these configuration files too or modify the doc for hive-tables in cluster mode.
## How was this patch tested?
cc cloud-fan gatorsmile
Author: Kent Yao <yaooqinn@hotmail.com>
Closes#19663 from yaooqinn/SPARK-21888.
The bug was introduced in SPARK-22290, which changed how the app's user
is impersonated in the AM. The changed missed an initialization function
that needs to be run as the app owner (who has the right credentials to
read from HDFS).
Author: Marcelo Vanzin <vanzin@cloudera.com>
Closes#19566 from vanzin/SPARK-22341.
Hive delegation tokens are only needed when the Spark driver has no access
to the kerberos TGT. That happens only in two situations:
- when using a proxy user
- when using cluster mode without a keytab
This change modifies the Hive provider so that it only generates delegation
tokens in those situations, and tweaks the YARN AM so that it makes the proper
user visible to the Hive code when running with keytabs, so that the TGT
can be used instead of a delegation token.
The effect of this change is that now it's possible to initialize multiple,
non-concurrent SparkContext instances in the same JVM. Before, the second
invocation would fail to fetch a new Hive delegation token, which then could
make the second (or third or...) application fail once the token expired.
With this change, the TGT will be used to authenticate to the HMS instead.
This change also avoids polluting the current logged in user's credentials
when launching applications. The credentials are copied only when running
applications as a proxy user. This makes it possible to implement SPARK-11035
later, where multiple threads might be launching applications, and each app
should have its own set of credentials.
Tested by verifying HDFS and Hive access in following scenarios:
- client and cluster mode
- client and cluster mode with proxy user
- client and cluster mode with principal / keytab
- long-running cluster app with principal / keytab
- pyspark app that creates (and stops) multiple SparkContext instances
through its lifetime
Author: Marcelo Vanzin <vanzin@cloudera.com>
Closes#19509 from vanzin/SPARK-22290.
## What changes were proposed in this pull request?
When the libraries temp directory(i.e. __spark_libs__*.zip dir) file system and staging dir(destination) file systems are the same then the __spark_libs__*.zip is not copying to the staging directory. But after making this decision the libraries zip file is getting deleted immediately and becoming unavailable for the Node Manager's localization.
With this change, client copies the files to remote always when the source scheme is "file".
## How was this patch tested?
I have verified it manually in yarn/cluster and yarn/client modes with hdfs and local file systems.
Author: Devaraj K <devaraj@apache.org>
Closes#19141 from devaraj-kavali/SPARK-21384.
The live listener bus now cleans up after itself and releases listeners
after stopping, so code cannot get references to listeners after the
Spark context is stopped.
Author: Marcelo Vanzin <vanzin@cloudera.com>
Closes#19297 from vanzin/SPARK-18838.hotfix.
…build; fix some things that will be warnings or errors in 2.12; restore Scala 2.12 profile infrastructure
## What changes were proposed in this pull request?
This change adds back the infrastructure for a Scala 2.12 build, but does not enable it in the release or Python test scripts.
In order to make that meaningful, it also resolves compile errors that the code hits in 2.12 only, in a way that still works with 2.11.
It also updates dependencies to the earliest minor release of dependencies whose current version does not yet support Scala 2.12. This is in a sense covered by other JIRAs under the main umbrella, but implemented here. The versions below still work with 2.11, and are the _latest_ maintenance release in the _earliest_ viable minor release.
- Scalatest 2.x -> 3.0.3
- Chill 0.8.0 -> 0.8.4
- Clapper 1.0.x -> 1.1.2
- json4s 3.2.x -> 3.4.2
- Jackson 2.6.x -> 2.7.9 (required by json4s)
This change does _not_ fully enable a Scala 2.12 build:
- It will also require dropping support for Kafka before 0.10. Easy enough, just didn't do it yet here
- It will require recreating `SparkILoop` and `Main` for REPL 2.12, which is SPARK-14650. Possible to do here too.
What it does do is make changes that resolve much of the remaining gap without affecting the current 2.11 build.
## How was this patch tested?
Existing tests and build. Manually tested with `./dev/change-scala-version.sh 2.12` to verify it compiles, modulo the exceptions above.
Author: Sean Owen <sowen@cloudera.com>
Closes#18645 from srowen/SPARK-14280.
In the current code, if NM recovery is not enabled then `YarnShuffleService` will write shuffle metadata to NM local dir-1, if this local dir-1 is on bad disk, then `YarnShuffleService` will be failed to start. So to solve this issue, in Spark side if NM recovery is not enabled, then Spark will not persist data into leveldb, in that case yarn shuffle service can still be served but lose the ability for recovery, (it is fine because the failure of NM will kill the containers as well as applications).
Tested in the local cluster with NM recovery off and on to see if folder is created or not. MiniCluster UT isn't added because in MiniCluster NM will always set port to 0, but NM recovery requires non-ephemeral port.
Author: jerryshao <sshao@hortonworks.com>
Closes#19032 from jerryshao/SPARK-17321.
Change-Id: I8f2fe73d175e2ad2c4e380caede3873e0192d027
## What changes were proposed in this pull request?
Fix typos
## How was this patch tested?
Existing tests
Author: Andrew Ash <andrew@andrewash.com>
Closes#18996 from ash211/patch-2.
## What changes were proposed in this pull request?
Add Kerberos Support to Mesos. This includes kinit and --keytab support, but does not include delegation token renewal.
## How was this patch tested?
Manually against a Secure DC/OS Apache HDFS cluster.
Author: ArtRand <arand@soe.ucsc.edu>
Author: Michael Gummelt <mgummelt@mesosphere.io>
Closes#18519 from mgummelt/SPARK-16742-kerberos.
This version fixes a few issues in the import order checker; it provides
better error messages, and detects more improper ordering (thus the need
to change a lot of files in this patch). The main fix is that it correctly
complains about the order of packages vs. classes.
As part of the above, I moved some "SparkSession" import in ML examples
inside the "$example on$" blocks; that didn't seem consistent across
different source files to start with, and avoids having to add more on/off blocks
around specific imports.
The new scalastyle also seems to have a better header detector, so a few
license headers had to be updated to match the expected indentation.
Author: Marcelo Vanzin <vanzin@cloudera.com>
Closes#18943 from vanzin/SPARK-21731.
The main goal of this change is to avoid the situation described
in the bug, where an AM restart in the middle of a job may cause
no new executors to be allocated because of faulty logic in the
reset path.
The change does two things:
- fixes the executor alloc manager's reset() so that it does not
stop allocation after a reset() in the middle of a job
- re-orders the initialization of the YarnAllocator class so that
it fetches the current executor ID before triggering the reset()
above.
This ensures both that the new allocator gets new requests for executors,
and that it starts from the correct executor id.
Tested with unit tests and by manually causing AM restarts while
running jobs using spark-shell in YARN mode.
Closes#17882
Author: Marcelo Vanzin <vanzin@cloudera.com>
Author: Guoqiang Li <witgo@qq.com>
Closes#18663 from vanzin/SPARK-20079.
If you run a spark job without creating the SparkSession or SparkContext, the spark job logs says it succeeded but yarn says it fails and retries 3 times. Also, since, Application Master unregisters with Resource Manager and exits successfully, it deletes the spark staging directory, so when yarn makes subsequent retries, it fails to find the staging directory and thus, the retries fail.
Added a flag to check whether user has initialized SparkContext. If it is true, we let Application Master unregister with Resource Manager else, we do not let AM unregister with RM.
## How was this patch tested?
Manually tested the fix.
Before:
<img width="1253" alt="screen shot-before" src="https://user-images.githubusercontent.com/22228190/28647214-69bf81e2-722b-11e7-9ed0-d416d2bf23be.png">
After:
<img width="1319" alt="screen shot-after" src="https://user-images.githubusercontent.com/22228190/28647220-70f9eea2-722b-11e7-85c6-e56276b15614.png">
Please review http://spark.apache.org/contributing.html before opening a pull request.
Author: pgandhi <pgandhi@yahoo-inc.com>
Author: pgandhi999 <parthkgandhi9@gmail.com>
Closes#18741 from pgandhi999/SPARK-21541.
There was some code based on the old SASL handler in the new auth client that
was incorrectly using the SASL user as the user to authenticate against the
external shuffle service. This caused the external service to not be able to
find the correct secret to authenticate the connection, failing the connection.
In the course of debugging, I found that some log messages from the YARN shuffle
service were a little noisy, so I silenced some of them, and also added a couple
of new ones that helped find this issue. On top of that, I found that a check
in the code that records app secrets was wrong, causing more log spam and also
using an O(n) operation instead of an O(1) call.
Also added a new integration suite for the YARN shuffle service with auth on,
and verified it failed before, and passes now.
Author: Marcelo Vanzin <vanzin@cloudera.com>
Closes#18706 from vanzin/SPARK-21494.
When NodeManagers launching Executors,
the `missing` value will exceed the
real value when the launch is slow, this can lead to YARN allocates more resource.
We add the `numExecutorsRunning` when calculate the `missing` to avoid this.
Test by experiment.
Author: DjvuLee <lihu@bytedance.com>
Closes#18651 from djvulee/YarnAllocate.
Instead of using the host's cpu count, use the number of cores allocated
for the Spark process when sizing the RPC dispatch thread pool. This avoids
creating large thread pools on large machines when the number of allocated
cores is small.
Tested by verifying number of threads with spark.executor.cores set
to 1 and 4; same thing for YARN AM.
Author: Marcelo Vanzin <vanzin@cloudera.com>
Closes#18639 from vanzin/SPARK-21408.
## What changes were proposed in this pull request?
In the current `YARNHadoopDelegationTokenManager`, `FileSystem` to which to get tokens are created out of KDC logged UGI, using these `FileSystem` to get new tokens will lead to exception. The main thing is that Spark code trying to get new tokens from the FS created with token auth-ed UGI, but Hadoop can only grant new tokens in kerberized UGI. To fix this issue, we should lazily create these FileSystem within KDC logged UGI.
## How was this patch tested?
Manual verification in secure cluster.
CC vanzin mgummelt please help to review, thanks!
Author: jerryshao <sshao@hortonworks.com>
Closes#18633 from jerryshao/SPARK-21411.
## What changes were proposed in this pull request?
In this issue we have a long running Spark application with secure HBase, which requires `HBaseCredentialProvider` to get tokens periodically, we specify HBase related jars with `--packages`, but these dependencies are not added into AM classpath, so when `HBaseCredentialProvider` tries to initialize HBase connections to get tokens, it will be failed.
Currently because jars specified with `--jars` or `--packages` are not added into AM classpath, the only way to extend AM classpath is to use "spark.driver.extraClassPath" which supposed to be used in yarn cluster mode.
So in this fix, we proposed to use/reuse a classloader for `AMCredentialRenewer` to acquire new tokens.
Also in this patch, we fixed AM cannot get tokens from HDFS issue, it is because FileSystem is gotten before kerberos logged, so using this FS to get tokens will throw exception.
## How was this patch tested?
Manual verification.
Author: jerryshao <sshao@hortonworks.com>
Closes#18616 from jerryshao/SPARK-21377.
## What changes were proposed in this pull request?
The current code is very verbose on shutdown.
The changes I propose is to change the log level when the driver is shutting down and the RPC connections are closed (RpcEnvStoppedException).
## How was this patch tested?
Tested with word count(deploy-mode = cluster, master = yarn, num-executors = 4) with 300GB of data.
Author: John Lee <jlee2@yahoo-inc.com>
Closes#18547 from yoonlee95/SPARK-21321.
When localizing the gateway config files in a YARN application, avoid
overwriting final configs by distributing the gateway files to a separate
directory, and explicitly loading them into the Hadoop config, instead
of placing those files before the cluster's files in the classpath.
This is done by saving the gateway's config to a separate XML file
distributed with the rest of the Spark app's config, and loading that
file when creating a new config through `YarnSparkHadoopUtil`.
Tested with existing unit tests, and by verifying the behavior in a YARN
cluster (final values are not overridden, non-final values are).
Author: Marcelo Vanzin <vanzin@cloudera.com>
Closes#18370 from vanzin/SPARK-9825.
## What changes were proposed in this pull request?
This issue happens in long running application with yarn cluster mode, because yarn#client doesn't sync token with AM, so it will always keep the initial token, this token may be expired in the long running scenario, so when yarn#client tries to clean up staging directory after application finished, it will use this expired token and meet token expire issue.
## How was this patch tested?
Manual verification is secure cluster.
Author: jerryshao <sshao@hortonworks.com>
Closes#18617 from jerryshao/SPARK-21376.
Currently the code monitoring the launch of the client AM uses the value of
spark.yarn.report.interval as the interval for polling the RM; if someone
has that value to a really large interval, it would take that long to detect
that the client AM has started, which is not expected.
Instead, have a separate config for the interval to use when the client AM is
starting. The other config is still used in cluster mode, and to detect the
status of the client AM after it is already running.
Tested by running client and cluster mode apps with a modified value of
spark.yarn.report.interval, verifying client AM launch is detected before
that interval elapses.
Author: Marcelo Vanzin <vanzin@cloudera.com>
Closes#18380 from vanzin/SPARK-16019.
## What changes were proposed in this pull request?
This PR aims to bump Py4J in order to fix the following float/double bug.
Py4J 0.10.5 fixes this (https://github.com/bartdag/py4j/issues/272) and the latest Py4J is 0.10.6.
**BEFORE**
```
>>> df = spark.range(1)
>>> df.select(df['id'] + 17.133574204226083).show()
+--------------------+
|(id + 17.1335742042)|
+--------------------+
| 17.1335742042|
+--------------------+
```
**AFTER**
```
>>> df = spark.range(1)
>>> df.select(df['id'] + 17.133574204226083).show()
+-------------------------+
|(id + 17.133574204226083)|
+-------------------------+
| 17.133574204226083|
+-------------------------+
```
## How was this patch tested?
Manual.
Author: Dongjoon Hyun <dongjoon@apache.org>
Closes#18546 from dongjoon-hyun/SPARK-21278.
## What changes were proposed in this pull request?
When I set different clusters for "spark.hadoop.fs.defaultFS" and "spark.yarn.stagingDir" as follows：
```
spark.hadoop.fs.defaultFS hdfs://tl-nn-tdw.tencent-distribute.com:54310
spark.yarn.stagingDir hdfs://ss-teg-2-v2/tmp/spark
```
The staging dir can not be deleted, it will prompt following message:
```
java.lang.IllegalArgumentException: Wrong FS: hdfs://ss-teg-2-v2/tmp/spark/.sparkStaging/application_1496819138021_77618, expected: hdfs://tl-nn-tdw.tencent-distribute.com:54310
```
## How was this patch tested?
Existing tests
Author: sharkdtu <sharkdtu@tencent.com>
Closes#18352 from sharkdtu/master.
## What changes were proposed in this pull request?
Move Hadoop delegation token code from `spark-yarn` to `spark-core`, so that other schedulers (such as Mesos), may use it. In order to avoid exposing Hadoop interfaces in spark-core, the new Hadoop delegation token classes are kept private. In order to provider backward compatiblity, and to allow YARN users to continue to load their own delegation token providers via Java service loading, the old YARN interfaces, as well as the client code that uses them, have been retained.
Summary:
- Move registered `yarn.security.ServiceCredentialProvider` classes from `spark-yarn` to `spark-core`. Moved them into a new, private hierarchy under `HadoopDelegationTokenProvider`. Client code in `HadoopDelegationTokenManager` now loads credentials from a whitelist of three providers (`HadoopFSDelegationTokenProvider`, `HiveDelegationTokenProvider`, `HBaseDelegationTokenProvider`), instead of service loading, which means that users are not able to implement their own delegation token providers, as they are in the `spark-yarn` module.
- The `yarn.security.ServiceCredentialProvider` interface has been kept for backwards compatibility, and to continue to allow YARN users to implement their own delegation token provider implementations. Client code in YARN now fetches tokens via the new `YARNHadoopDelegationTokenManager` class, which fetches tokens from the core providers through `HadoopDelegationTokenManager`, as well as service loads them from `yarn.security.ServiceCredentialProvider`.
Old Hierarchy:
```
yarn.security.ServiceCredentialProvider (service loaded)
HadoopFSCredentialProvider
HiveCredentialProvider
HBaseCredentialProvider
yarn.security.ConfigurableCredentialManager
```
New Hierarchy:
```
HadoopDelegationTokenManager
HadoopDelegationTokenProvider (not service loaded)
HadoopFSDelegationTokenProvider
HiveDelegationTokenProvider
HBaseDelegationTokenProvider
yarn.security.ServiceCredentialProvider (service loaded)
yarn.security.YARNHadoopDelegationTokenManager
```
## How was this patch tested?
unit tests
Author: Michael Gummelt <mgummelt@mesosphere.io>
Author: Dr. Stefan Schimanski <sttts@mesosphere.io>
Closes#17723 from mgummelt/SPARK-20434-refactor-kerberos.
In Spark on YARN, when configuring "spark.yarn.jars" with local jars (jars started with "local" scheme), we will get inaccurate classpath for AM and containers. This is because we don't remove "local" scheme when concatenating classpath. It is OK to run because classpath is separated with ":" and java treat "local" as a separate jar. But we could improve it to remove the scheme.
Updated `ClientSuite` to check "local" is not in the classpath.
cc jerryshao
Author: Li Yichao <lyc@zhihu.com>
Author: Li Yichao <liyichao.good@gmail.com>
Closes#18129 from liyichao/SPARK-20365.
## What changes were proposed in this pull request?
Deleted generated JARs archive after distribution to HDFS
## How was this patch tested?
Please review http://spark.apache.org/contributing.html before opening a pull request.
Author: Lior Regev <lioregev@gmail.com>
Closes#17986 from liorregev/master.
## What changes were proposed in this pull request?
After SPARK-10997, client mode Netty RpcEnv doesn't require to start server, so port configurations are not used any more, here propose to remove these two configurations: "spark.executor.port" and "spark.am.port".
## How was this patch tested?
Existing UTs.
Author: jerryshao <sshao@hortonworks.com>
Closes#17866 from jerryshao/SPARK-20605.
## What changes were proposed in this pull request?
Currently, `spark.executor.instances` is deprecated in `spark-env.sh`, because we suggest config it in `spark-defaults.conf` or other config file. And also this parameter is useless even if you set it in `spark-env.sh`, so remove it in this patch.
## How was this patch tested?
Existing tests.
Please review http://spark.apache.org/contributing.html before opening a pull request.
Author: Xianyang Liu <xianyang.liu@intel.com>
Closes#17881 from ConeyLiu/deprecatedParam.
## What changes were proposed in this pull request?
Fix build warnings primarily related to Breeze 0.13 operator changes, Java style problems
## How was this patch tested?
Existing tests
Author: Sean Owen <sowen@cloudera.com>
Closes#17803 from srowen/SPARK-20523.
This change does a more thorough redaction of sensitive information from logs and UI
Add unit tests that ensure that no regressions happen that leak sensitive information to the logs.
The motivation for this change was appearance of password like so in `SparkListenerEnvironmentUpdate` in event logs under some JVM configurations:
`"sun.java.command":"org.apache.spark.deploy.SparkSubmit ... --conf spark.executorEnv.HADOOP_CREDSTORE_PASSWORD=secret_password ..."
`
Previously redaction logic was only checking if the key matched the secret regex pattern, it'd redact it's value. That worked for most cases. However, in the above case, the key (sun.java.command) doesn't tell much, so the value needs to be searched. This PR expands the check to check for values as well.
## How was this patch tested?
New unit tests added that ensure that no sensitive information is present in the event logs or the yarn logs. Old unit test in UtilsSuite was modified because the test was asserting that a non-sensitive property's value won't be redacted. However, the non-sensitive value had the literal "secret" in it which was causing it to redact. Simply updating the non-sensitive property's value to another arbitrary value (that didn't have "secret" in it) fixed it.
Author: Mark Grover <mark@apache.org>
Closes#17725 from markgrover/spark-20435.
## What changes were proposed in this pull request?
Typo fix: distitrbuted -> distributed
## How was this patch tested?
Existing tests
Author: Andrew Ash <andrew@andrewash.com>
Closes#17664 from ash211/patch-1.
## What changes were proposed in this pull request?
Add Locale.ROOT to internal calls to String `toLowerCase`, `toUpperCase`, to avoid inadvertent locale-sensitive variation in behavior (aka the "Turkish locale problem").
The change looks large but it is just adding `Locale.ROOT` (the locale with no country or language specified) to every call to these methods.
## How was this patch tested?
Existing tests.
Author: Sean Owen <sowen@cloudera.com>
Closes#17527 from srowen/SPARK-20156.
Current test code tries to override the RackResolver used by setting
configuration params, but because YARN libs statically initialize the
resolver the first time it's used, that means that those configs don't
really take effect during Spark tests.
This change adds a wrapper class that easily allows tests to override the
behavior of the resolver for the Spark code that uses it.
Author: Marcelo Vanzin <vanzin@cloudera.com>
Closes#17508 from vanzin/SPARK-20191.
## What changes were proposed in this pull request?
Currently we use system classloader to find HBase jars, if it is specified by `--jars`, then it will be failed with ClassNotFound issue. So here changing to use child classloader.
Also putting added jars and main jar into classpath of submitted application in yarn cluster mode, otherwise HBase jars specified with `--jars` will never be honored in cluster mode, and fetching tokens in client side will always be failed.
## How was this patch tested?
Unit test and local verification.
Author: jerryshao <sshao@hortonworks.com>
Closes#17388 from jerryshao/SPARK-20059.
## What changes were proposed in this pull request?
In the current Spark on YARN code, we will obtain tokens from provided services, but we're not going to add these tokens to the current user's credentials. This will make all the following operations to these services still require TGT rather than delegation tokens. This is unnecessary since we already got the tokens, also this will lead to failure in user impersonation scenario, because the TGT is granted by real user, not proxy user.
So here changing to put all the tokens to the current UGI, so that following operations to these services will honor tokens rather than TGT, and this will further handle the proxy user issue mentioned above.
## How was this patch tested?
Local verified in secure cluster.
vanzin tgravescs mridulm dongjoon-hyun please help to review, thanks a lot.
Author: jerryshao <sshao@hortonworks.com>
Closes#17335 from jerryshao/SPARK-19995.
## What changes were proposed in this pull request?
Adding additional information to existing logging messages:
- YarnAllocator: log the executor ID together with the container id when a container for an executor is launched.
- NettyRpcEnv: log the receiver address when there is a timeout waiting for an answer to a remote call.
- ExecutorAllocationManager: fix a typo in the logging message for the list of executors to be removed.
## How was this patch tested?
Build spark and submit the word count example to a YARN cluster using cluster mode
Author: Juan Rodriguez Hortala <hortala@amazon.com>
Closes#17411 from juanrh/logging-improvements.
Add parentheses so that both lines form a single statement; also add
a log message so that the issue becomes more explicit if it shows up
again.
Tested manually with integration test that exercises the feature.
Author: Marcelo Vanzin <vanzin@cloudera.com>
Closes#17198 from vanzin/SPARK-19857.
## What changes were proposed in this pull request?
self.environment will be propagated to executor. Should set PYTHONHASHSEED as long as the python version is greater than 3.3
## How was this patch tested?
Manually tested it.
Author: Jeff Zhang <zjffdu@apache.org>
Closes#11211 from zjffdu/SPARK-13330.
## What changes were proposed in this pull request?
Because yarn#client will reset the `spark.yarn.keytab` configuration to point to the location in distributed file, so if user still uses the old `SparkConf` to create `SparkSession` with Hive enabled, it will read keytab from the path in distributed cached. This is OK for yarn cluster mode, but in yarn client mode where driver is running out of container, it will be failed to fetch the keytab.
So here we should avoid reseting this configuration in the `yarn#client` and only overwriting it for AM, so using `spark.yarn.keytab` could get correct keytab path no matter running in client (keytab in local fs) or cluster (keytab in distributed cache) mode.
## How was this patch tested?
Verified in security cluster.
Author: jerryshao <sshao@hortonworks.com>
Closes#16923 from jerryshao/SPARK-19038.
Allow an application to use the History Server URL as the tracking
URL in the YARN RM, so there's still a link to the web UI somewhere
in YARN even if the driver's UI is disabled. This is useful, for
example, if an admin wants to disable the driver UI by default for
applications, since it's harder to secure it (since it involves non
trivial ssl certificate and auth management that admins may not want
to expose to user apps).
This needs to be opt-in, because of the way the YARN proxy works, so
a new configuration was added to enable the option.
The YARN RM will proxy requests to live AMs instead of redirecting
the client, so pages in the SHS UI will not render correctly since
they'll reference invalid paths in the RM UI. The proxy base support
in the SHS cannot be used since that would prevent direct access to
the SHS.
So, to solve this problem, for the feature to work end-to-end, a new
YARN-specific filter was added that detects whether the requests come
from the proxy and redirects the client appropriatly. The SHS admin has
to add this filter manually if they want the feature to work.
Tested with new unit test, and by running with the documented configuration
set in a test cluster. Also verified the driver UI is used when it's
enabled.
Author: Marcelo Vanzin <vanzin@cloudera.com>
Closes#16946 from vanzin/SPARK-19554.
## What changes were proposed in this pull request?
In https://github.com/apache/spark/pull/14065, we introduced a configurable credential manager for Spark running on YARN. Also two configs `spark.yarn.credentials.renewalTime` and `spark.yarn.credentials.updateTime` were added, one is for the credential renewer and the other updater. But now we just query `spark.yarn.credentials.renewalTime` by mistake during CREDENTIALS UPDATING, where should be actually `spark.yarn.credentials.updateTime` .
This PR fixes this mistake.
## How was this patch tested?
existing test
cc jerryshao vanzin
Author: Kent Yao <yaooqinn@hotmail.com>
Closes#16955 from yaooqinn/cred_update.
## What changes were proposed in this pull request?
`askSync` is already added in `RpcEndpointRef` (see SPARK-19347 and https://github.com/apache/spark/pull/16690#issuecomment-276850068) and `askWithRetry` is marked as deprecated.
As mentioned SPARK-18113(https://github.com/apache/spark/pull/16503#event-927953218):
>askWithRetry is basically an unneeded API, and a leftover from the akka days that doesn't make sense anymore. It's prone to cause deadlocks (exactly because it's blocking), it imposes restrictions on the caller (e.g. idempotency) and other things that people generally don't pay that much attention to when using it.
Since `askWithRetry` is just used inside spark and not in user logic. It might make sense to replace all of them with `askSync`.
## How was this patch tested?
This PR doesn't change code logic, existing unit test can cover.
Author: jinxing <jinxing@meituan.com>
Closes#16790 from jinxing64/SPARK-19450.
- Move external/java8-tests tests into core, streaming, sql and remove
- Remove MaxPermGen and related options
- Fix some reflection / TODOs around Java 8+ methods
- Update doc references to 1.7/1.8 differences
- Remove Java 7/8 related build profiles
- Update some plugins for better Java 8 compatibility
- Fix a few Java-related warnings
For the future:
- Update Java 8 examples to fully use Java 8
- Update Java tests to use lambdas for simplicity
- Update Java internal implementations to use lambdas
## How was this patch tested?
Existing tests
Author: Sean Owen <sowen@cloudera.com>
Closes#16871 from srowen/SPARK-19493.
## What changes were proposed in this pull request?
Due to the newly added API in Hadoop 2.6.4+, Spark builds against Hadoop 2.6.0~2.6.3 will meet compile error. So here still reverting back to use reflection to handle this issue.
## How was this patch tested?
Manual verification.
Author: jerryshao <sshao@hortonworks.com>
Closes#16884 from jerryshao/SPARK-19545.
Add back mockito test dep in YARN module, as it ends up being required in a Maven build
## How was this patch tested?
PR builder again, but also a local `mvn` run using the command that the broken Jenkins job uses
Author: Sean Owen <sowen@cloudera.com>
Closes#16853 from srowen/SPARK-19464.2.
## What changes were proposed in this pull request?
- Remove support for Hadoop 2.5 and earlier
- Remove reflection and code constructs only needed to support multiple versions at once
- Update docs to reflect newer versions
- Remove older versions' builds and profiles.
## How was this patch tested?
Existing tests
Author: Sean Owen <sowen@cloudera.com>
Closes#16810 from srowen/SPARK-19464.
That method is prone to stack overflows when the input map is really
large; instead, use plain "map". Also includes a unit test that was
tested and caused stack overflows without the fix.
Author: Marcelo Vanzin <vanzin@cloudera.com>
Closes#16667 from vanzin/SPARK-18750.
## What changes were proposed in this pull request?
remove ununsed imports and outdated comments, and fix some minor code style issue.
## How was this patch tested?
existing ut
Author: uncleGen <hustyugm@gmail.com>
Closes#16591 from uncleGen/SPARK-19227.
## What changes were proposed in this pull request?
`spark.yarn.access.namenodes` configuration cannot actually reflects the usage of it, inside the code it is the Hadoop filesystems we get tokens, not NNs. So here propose to update the name of this configuration, also change the related code and doc.
## How was this patch tested?
Local verification.
Author: jerryshao <sshao@hortonworks.com>
Closes#16560 from jerryshao/SPARK-19179.
## What changes were proposed in this pull request?
#16092 moves YARN resource manager related code to resource-managers/yarn directory. The test case ```YarnSchedulerBackendSuite``` was added after that but with the wrong place. I move it to correct directory in this PR.
## How was this patch tested?
Existing test.
Author: Yanbo Liang <ybliang8@gmail.com>
Closes#16595 from yanboliang/yarn.
Currently Spark can only get token renewal interval from security HDFS (hdfs://), if Spark runs with other security file systems like webHDFS (webhdfs://), wasb (wasb://), ADLS, it will ignore these tokens and not get token renewal intervals from these tokens. These will make Spark unable to work with these security clusters. So instead of only checking HDFS token, we should generalize to support different DelegationTokenIdentifier.
## How was this patch tested?
Manually verified in security cluster.
Author: jerryshao <sshao@hortonworks.com>
Closes#16432 from jerryshao/SPARK-19021.
## What changes were proposed in this pull request?
There are many locations in the Spark repo where the same word occurs consecutively. Sometimes they are appropriately placed, but many times they are not. This PR removes the inappropriately duplicated words.
## How was this patch tested?
N/A since only docs or comments were updated.
Author: Niranjan Padmanabhan <niranjan.padmanabhan@gmail.com>
Closes#16455 from neurons/np.structure_streaming_doc.
## What changes were proposed in this pull request?
LauncherState should be only set to SUBMITTED after the application is submitted.
Currently the state is set before the application is actually submitted.
## How was this patch tested?
no test is added in this patch
Author: mingfei <mingfei.smf@alipay.com>
Closes#16459 from shimingfei/fixLauncher.
## What changes were proposed in this pull request?
The configuration `spark.yarn.security.tokens.{service}.enabled` is deprecated. Now we should use `spark.yarn.security.credentials.{service}.enabled`. Some places in the doc is not updated yet.
## How was this patch tested?
N/A. Just doc change.
Please review http://spark.apache.org/contributing.html before opening a pull request.
Author: Liang-Chi Hsieh <viirya@gmail.com>
Closes#16444 from viirya/minor-credential-provider-doc.
Remove spark-tag's compile-scope dependency (and, indirectly, spark-core's compile-scope transitive-dependency) on scalatest by splitting test-oriented tags into spark-tags' test JAR.
Alternative to #16303.
Author: Ryan Williams <ryan.blake.williams@gmail.com>
Closes#16311 from ryan-williams/tt.
## What changes were proposed in this pull request?
93cdb8a7d0 Introduced a compile error under scala 2.10, this fixes that error.
## How was this patch tested?
locally ran
```
dev/change-version-to-2.10.sh
build/sbt -Pyarn -Phadoop-2.4 -Dhadoop.version=2.6.0 -Dscala-2.10 "project yarn" "test-only *YarnAllocatorSuite"
```
(which failed at test compilation before this change)
Author: Imran Rashid <irashid@cloudera.com>
Closes#16298 from squito/blacklist-2.10.
## What changes were proposed in this pull request?
This builds upon the blacklisting introduced in SPARK-17675 to add blacklisting of executors and nodes for an entire Spark application. Resources are blacklisted based on tasks that fail, in tasksets that eventually complete successfully; they are automatically returned to the pool of active resources based on a timeout. Full details are available in a design doc attached to the jira.
## How was this patch tested?
Added unit tests, ran them via Jenkins, also ran a handful of them in a loop to check for flakiness.
The added tests include:
- verifying BlacklistTracker works correctly
- verifying TaskSchedulerImpl interacts with BlacklistTracker correctly (via a mock BlacklistTracker)
- an integration test for the entire scheduler with blacklisting in a few different scenarios
Author: Imran Rashid <irashid@cloudera.com>
Author: mwws <wei.mao@intel.com>
Closes#14079 from squito/blacklist-SPARK-8425.
