## What changes were proposed in this pull request?
`from_json` is currently not safe against `null` rows. This PR adds a fix and a regression test for it.
## How was this patch tested?
Regression test
Author: Burak Yavuz <brkyvz@gmail.com>
Closes#15771 from brkyvz/json_fix.
## What changes were proposed in this pull request?
It seems the proximate cause of the test failures is that `cast(str as decimal)` in derby will raise an exception instead of returning NULL. This is a problem since Hive sometimes inserts `__HIVE_DEFAULT_PARTITION__` entries into the partition table as documented here: https://github.com/apache/hive/blob/trunk/metastore/src/java/org/apache/hadoop/hive/metastore/MetaStoreDirectSql.java#L1034
Basically, when these special default partitions are present, partition pruning pushdown using the SQL-direct mode will fail due this cast exception. As commented on in `MetaStoreDirectSql.java` above, this is normally fine since Hive falls back to JDO pruning, however when the pruning predicate contains an unsupported operator such as `>`, that will fail as well.
The only remaining question is why this behavior is nondeterministic. We know that when the test flakes, retries do not help, therefore the cause must be environmental. The current best hypothesis is that some config is different between different jenkins runs, which is why this PR prints out the Spark SQL and Hive confs for the test. The hope is that by comparing the config state for failure vs success we can isolate the root cause of the flakiness.
**Update:** we could not isolate the issue. It does not seem to be due to configuration differences. As such, I'm going to enable the non-flaky parts of the test since we are fairly confident these issues only occur with Derby (which is not used in production).
## How was this patch tested?
N/A
Author: Eric Liang <ekl@databricks.com>
Closes#15725 from ericl/print-confs-out.
## What changes were proposed in this pull request?
The `PushDownPredicate` rule can create a wrong result if we try to push a filter containing a predicate subquery through a project when the subquery and the project share attributes (have the same source).
The current PR fixes this by making sure that we do not push down when there is a predicate subquery that outputs the same attributes as the filters new child plan.
## How was this patch tested?
Added a test to `SubquerySuite`. nsyca has done previous work this. I have taken test from his initial PR.
Author: Herman van Hovell <hvanhovell@databricks.com>
Closes#15761 from hvanhovell/SPARK-17337.
## What changes were proposed in this pull request?
`QueryExecution.toString` currently captures `java.lang.Throwable`s; this is far from a best practice and can lead to confusing situation or invalid application states. This PR fixes this by only capturing `AnalysisException`s.
## How was this patch tested?
Added a `QueryExecutionSuite`.
Author: Herman van Hovell <hvanhovell@databricks.com>
Closes#15760 from hvanhovell/SPARK-18259.
## What changes were proposed in this pull request?
This patch improves error reporting for FileStressSuite, when there is an error in Spark itself (not user code). This works by simply tightening the exception verification, and gets rid of the unnecessary thread for starting the stream.
Also renamed the class FileStreamStressSuite to make it more obvious it is a streaming suite.
## How was this patch tested?
This is a test only change and I manually verified error reporting by injecting some bug in the addBatch code for FileStreamSink.
Author: Reynold Xin <rxin@databricks.com>
Closes#15757 from rxin/SPARK-18257.
hive.exec.stagingdir have no effect in spark2.0.1，
Hive confs in hive-site.xml will be loaded in `hadoopConf`, so we should use `hadoopConf` in `InsertIntoHiveTable` instead of `SessionState.conf`
Author: 福星 <fuxing@wacai.com>
Closes#15744 from ClassNotFoundExp/master.
## What changes were proposed in this pull request?
This patch renames partitionProviderIsHive to tracksPartitionsInCatalog, as the old name was too Hive specific.
## How was this patch tested?
Should be covered by existing tests.
Author: Reynold Xin <rxin@databricks.com>
Closes#15750 from rxin/SPARK-18244.
## What changes were proposed in this pull request?
This PR adds a new hash-based aggregate operator named `ObjectHashAggregateExec` that supports `TypedImperativeAggregate`, which may use arbitrary Java objects as aggregation states. Please refer to the [design doc](https://issues.apache.org/jira/secure/attachment/12834260/%5BDesign%20Doc%5D%20Support%20for%20Arbitrary%20Aggregation%20States.pdf) attached in [SPARK-17949](https://issues.apache.org/jira/browse/SPARK-17949) for more details about it.
The major benefit of this operator is better performance when evaluating `TypedImperativeAggregate` functions, especially when there are relatively few distinct groups. Functions like Hive UDAFs, `collect_list`, and `collect_set` may also benefit from this after being migrated to `TypedImperativeAggregate`.
The following feature flag is introduced to enable or disable the new aggregate operator:
- Name: `spark.sql.execution.useObjectHashAggregateExec`
- Default value: `true`
We can also configure the fallback threshold using the following SQL operation:
- Name: `spark.sql.objectHashAggregate.sortBased.fallbackThreshold`
- Default value: 128
Fallback to sort-based aggregation when more than 128 distinct groups are accumulated in the aggregation hash map. This number is intentionally made small to avoid GC problems since aggregation buffers of this operator may contain arbitrary Java objects.
This may be improved by implementing size tracking for this operator, but that can be done in a separate PR.
Code generation and size tracking are planned to be implemented in follow-up PRs.
## Benchmark results
### `ObjectHashAggregateExec` vs `SortAggregateExec`
The first benchmark compares `ObjectHashAggregateExec` and `SortAggregateExec` by evaluating `typed_count`, a testing `TypedImperativeAggregate` version of the SQL `count` function.
```
Java HotSpot(TM) 64-Bit Server VM 1.8.0_92-b14 on Mac OS X 10.10.5
Intel(R) Core(TM) i7-4960HQ CPU 2.60GHz
object agg v.s. sort agg: Best/Avg Time(ms) Rate(M/s) Per Row(ns) Relative
------------------------------------------------------------------------------------------------
sort agg w/ group by 31251 / 31908 3.4 298.0 1.0X
object agg w/ group by w/o fallback 6903 / 7141 15.2 65.8 4.5X
object agg w/ group by w/ fallback 20945 / 21613 5.0 199.7 1.5X
sort agg w/o group by 4734 / 5463 22.1 45.2 6.6X
object agg w/o group by w/o fallback 4310 / 4529 24.3 41.1 7.3X
```
The next benchmark compares `ObjectHashAggregateExec` and `SortAggregateExec` by evaluating the Spark native version of `percentile_approx`.
Note that `percentile_approx` is so heavy an aggregate function that the bottleneck of the benchmark is evaluating the aggregate function itself rather than the aggregate operator since I couldn't run a large scale benchmark on my laptop. That's why the results are so close and looks counter-intuitive (aggregation with grouping is even faster than that aggregation without grouping).
```
Java HotSpot(TM) 64-Bit Server VM 1.8.0_92-b14 on Mac OS X 10.10.5
Intel(R) Core(TM) i7-4960HQ CPU 2.60GHz
object agg v.s. sort agg: Best/Avg Time(ms) Rate(M/s) Per Row(ns) Relative
------------------------------------------------------------------------------------------------
sort agg w/ group by 3418 / 3530 0.6 1630.0 1.0X
object agg w/ group by w/o fallback 3210 / 3314 0.7 1530.7 1.1X
object agg w/ group by w/ fallback 3419 / 3511 0.6 1630.1 1.0X
sort agg w/o group by 4336 / 4499 0.5 2067.3 0.8X
object agg w/o group by w/o fallback 4271 / 4372 0.5 2036.7 0.8X
```
### Hive UDAF vs Spark AF
This benchmark compares the following two kinds of aggregate functions:
- "hive udaf": Hive implementation of `percentile_approx`, without partial aggregation supports, evaluated using `SortAggregateExec`.
- "spark af": Spark native implementation of `percentile_approx`, with partial aggregation support, evaluated using `ObjectHashAggregateExec`
The performance differences are mostly due to faster implementation and partial aggregation support in the Spark native version of `percentile_approx`.
This benchmark basically shows the performance differences between the worst case, where an aggregate function without partial aggregation support is evaluated using `SortAggregateExec`, and the best case, where a `TypedImperativeAggregate` with partial aggregation support is evaluated using `ObjectHashAggregateExec`.
```
Java HotSpot(TM) 64-Bit Server VM 1.8.0_92-b14 on Mac OS X 10.10.5
Intel(R) Core(TM) i7-4960HQ CPU 2.60GHz
hive udaf vs spark af: Best/Avg Time(ms) Rate(M/s) Per Row(ns) Relative
------------------------------------------------------------------------------------------------
hive udaf w/o group by 5326 / 5408 0.0 81264.2 1.0X
spark af w/o group by 93 / 111 0.7 1415.6 57.4X
hive udaf w/ group by 3804 / 3946 0.0 58050.1 1.4X
spark af w/ group by w/o fallback 71 / 90 0.9 1085.7 74.8X
spark af w/ group by w/ fallback 98 / 111 0.7 1501.6 54.1X
```
### Real world benchmark
We also did a relatively large benchmark using a real world query involving `percentile_approx`:
- Hive UDAF implementation, sort-based aggregation, w/o partial aggregation support
24.77 minutes
- Native implementation, sort-based aggregation, w/ partial aggregation support
4.64 minutes
- Native implementation, object hash aggregator, w/ partial aggregation support
1.80 minutes
## How was this patch tested?
New unit tests and randomized test cases are added in `ObjectAggregateFunctionSuite`.
Author: Cheng Lian <lian@databricks.com>
Closes#15590 from liancheng/obj-hash-agg.
### What changes were proposed in this pull request?
When `FilterExec` contains `isNotNull`, which could be inferred and pushed down or users specified, we convert the nullability of the involved columns if the top-layer expression is null-intolerant. However, this is not correct, if the top-layer expression is not a leaf expression, it could still tolerate the null when it has null-tolerant child expressions.
For example, `cast(coalesce(a#5, a#15) as double)`. Although `cast` is a null-intolerant expression, but obviously`coalesce` is null-tolerant. Thus, it could eat null.
When the nullability is wrong, we could generate incorrect results in different cases. For example,
``` Scala
val df1 = Seq((1, 2), (2, 3)).toDF("a", "b")
val df2 = Seq((2, 5), (3, 4)).toDF("a", "c")
val joinedDf = df1.join(df2, Seq("a"), "outer").na.fill(0)
val df3 = Seq((3, 1)).toDF("a", "d")
joinedDf.join(df3, "a").show
```
The optimized plan is like
```
Project [a#29, b#30, c#31, d#42]
+- Join Inner, (a#29 = a#41)
:- Project [cast(coalesce(cast(coalesce(a#5, a#15) as double), 0.0) as int) AS a#29, cast(coalesce(cast(b#6 as double), 0.0) as int) AS b#30, cast(coalesce(cast(c#16 as double), 0.0) as int) AS c#31]
: +- Filter isnotnull(cast(coalesce(cast(coalesce(a#5, a#15) as double), 0.0) as int))
: +- Join FullOuter, (a#5 = a#15)
: :- LocalRelation [a#5, b#6]
: +- LocalRelation [a#15, c#16]
+- LocalRelation [a#41, d#42]
```
Without the fix, it returns an empty result. With the fix, it can return a correct answer:
```
+---+---+---+---+
| a| b| c| d|
+---+---+---+---+
| 3| 0| 4| 1|
+---+---+---+---+
```
### How was this patch tested?
Added test cases to verify the nullability changes in FilterExec. Also added a test case for verifying the reported incorrect result.
Author: gatorsmile <gatorsmile@gmail.com>
Closes#15523 from gatorsmile/nullabilityFilterExec.
## What changes were proposed in this pull request?
I was reading this part of the code and was really confused by the "partition" parameter. This patch adds some documentation for it to reduce confusion in the future.
I also looked around other logical plans but most of them are either already documented, or pretty self-evident to people that know Spark SQL.
## How was this patch tested?
N/A - doc change only.
Author: Reynold Xin <rxin@databricks.com>
Closes#15749 from rxin/doc-improvement.
## What changes were proposed in this pull request?
This patch moves the new commit protocol API from sql/core to core module, so we can use it in the future in the RDD API.
As part of this patch, I also moved the speficiation of the random uuid for the write path out of the commit protocol, and instead pass in a job id.
## How was this patch tested?
N/A
Author: Reynold Xin <rxin@databricks.com>
Closes#15731 from rxin/SPARK-18219.
## What changes were proposed in this pull request?
In Spark 1.6 and earlier, we can drop the database we are using. In Spark 2.0, native implementation prevent us from dropping current database, which may break some old queries. This PR would re-enable the feature.
## How was this patch tested?
one new unit test in `SessionCatalogSuite`.
Author: Daoyuan Wang <daoyuan.wang@intel.com>
Closes#15011 from adrian-wang/dropcurrent.
### What changes were proposed in this pull request?
So far, we have limited test case coverage about implicit type casting. We need to draw a matrix to find all the possible casting pairs.
- Reorged the existing test cases
- Added all the possible type casting pairs
- Drawed a matrix to show the implicit type casting. The table is very wide. Maybe hard to review. Thus, you also can access the same table via the link to [a google sheet](https://docs.google.com/spreadsheets/d/19PS4ikrs-Yye_mfu-rmIKYGnNe-NmOTt5DDT1fOD3pI/edit?usp=sharing).
SourceType\CastToType | ByteType | ShortType | IntegerType | LongType | DoubleType | FloatType | Dec(10, 2) | BinaryType | BooleanType | StringType | DateType | TimestampType | ArrayType | MapType | StructType | NullType | CalendarIntervalType | DecimalType | NumericType | IntegralType
------------ | ------------ | ------------ | ------------ | ------------ | ------------ | ------------ | ------------ | ------------ | ------------ | ------------ | ------------ | ------------ | ------------ | ------------ | ------------ | ------------ | ------------ | ------------ | ------------ | -----------
**ByteType** | ByteType | ShortType | IntegerType | LongType | DoubleType | FloatType | Dec(10, 2) | X | X | StringType | X | X | X | X | X | X | X | DecimalType(3, 0) | ByteType | ByteType
**ShortType** | ByteType | ShortType | IntegerType | LongType | DoubleType | FloatType | Dec(10, 2) | X | X | StringType | X | X | X | X | X | X | X | DecimalType(5, 0) | ShortType | ShortType
**IntegerType** | ByteType | ShortType | IntegerType | LongType | DoubleType | FloatType | Dec(10, 2) | X | X | StringType | X | X | X | X | X | X | X | DecimalType(10, 0) | IntegerType | IntegerType
**LongType** | ByteType | ShortType | IntegerType | LongType | DoubleType | FloatType | Dec(10, 2) | X | X | StringType | X | X | X | X | X | X | X | DecimalType(20, 0) | LongType | LongType
**DoubleType** | ByteType | ShortType | IntegerType | LongType | DoubleType | FloatType | Dec(10, 2) | X | X | StringType | X | X | X | X | X | X | X | DecimalType(30, 15) | DoubleType | IntegerType
**FloatType** | ByteType | ShortType | IntegerType | LongType | DoubleType | FloatType | Dec(10, 2) | X | X | StringType | X | X | X | X | X | X | X | DecimalType(14, 7) | FloatType | IntegerType
**Dec(10, 2)** | ByteType | ShortType | IntegerType | LongType | DoubleType | FloatType | Dec(10, 2) | X | X | StringType | X | X | X | X | X | X | X | DecimalType(10, 2) | Dec(10, 2) | IntegerType
**BinaryType** | X | X | X | X | X | X | X | BinaryType | X | StringType | X | X | X | X | X | X | X | X | X | X
**BooleanType** | X | X | X | X | X | X | X | X | BooleanType | StringType | X | X | X | X | X | X | X | X | X | X
**StringType** | ByteType | ShortType | IntegerType | LongType | DoubleType | FloatType | Dec(10, 2) | BinaryType | X | StringType | DateType | TimestampType | X | X | X | X | X | DecimalType(38, 18) | DoubleType | X
**DateType** | X | X | X | X | X | X | X | X | X | StringType | DateType | TimestampType | X | X | X | X | X | X | X | X
**TimestampType** | X | X | X | X | X | X | X | X | X | StringType | DateType | TimestampType | X | X | X | X | X | X | X | X
**ArrayType** | X | X | X | X | X | X | X | X | X | X | X | X | ArrayType* | X | X | X | X | X | X | X
**MapType** | X | X | X | X | X | X | X | X | X | X | X | X | X | MapType* | X | X | X | X | X | X
**StructType** | X | X | X | X | X | X | X | X | X | X | X | X | X | X | StructType* | X | X | X | X | X
**NullType** | ByteType | ShortType | IntegerType | LongType | DoubleType | FloatType | Dec(10, 2) | BinaryType | BooleanType | StringType | DateType | TimestampType | ArrayType | MapType | StructType | NullType | CalendarIntervalType | DecimalType(38, 18) | DoubleType | IntegerType
**CalendarIntervalType** | X | X | X | X | X | X | X | X | X | X | X | X | X | X | X | X | CalendarIntervalType | X | X | X
Note: ArrayType\*, MapType\*, StructType\* are castable only when the internal child types also match; otherwise, not castable
### How was this patch tested?
N/A
Author: gatorsmile <gatorsmile@gmail.com>
Closes#15691 from gatorsmile/implicitTypeCasting.
## What changes were proposed in this pull request?
This PR proposes to change the documentation for functions. Please refer the discussion from https://github.com/apache/spark/pull/15513
The changes include
- Re-indent the documentation
- Add examples/arguments in `extended` where the arguments are multiple or specific format (e.g. xml/ json).
For examples, the documentation was updated as below:
### Functions with single line usage
**Before**
- `pow`
``` sql
Usage: pow(x1, x2) - Raise x1 to the power of x2.
Extended Usage:
> SELECT pow(2, 3);
8.0
```
- `current_timestamp`
``` sql
Usage: current_timestamp() - Returns the current timestamp at the start of query evaluation.
Extended Usage:
No example for current_timestamp.
```
**After**
- `pow`
``` sql
Usage: pow(expr1, expr2) - Raises `expr1` to the power of `expr2`.
Extended Usage:
Examples:
> SELECT pow(2, 3);
8.0
```
- `current_timestamp`
``` sql
Usage: current_timestamp() - Returns the current timestamp at the start of query evaluation.
Extended Usage:
No example/argument for current_timestamp.
```
### Functions with (already) multiple line usage
**Before**
- `approx_count_distinct`
``` sql
Usage: approx_count_distinct(expr) - Returns the estimated cardinality by HyperLogLog++.
approx_count_distinct(expr, relativeSD=0.05) - Returns the estimated cardinality by HyperLogLog++
with relativeSD, the maximum estimation error allowed.
Extended Usage:
No example for approx_count_distinct.
```
- `percentile_approx`
``` sql
Usage:
percentile_approx(col, percentage [, accuracy]) - Returns the approximate percentile value of numeric
column `col` at the given percentage. The value of percentage must be between 0.0
and 1.0. The `accuracy` parameter (default: 10000) is a positive integer literal which
controls approximation accuracy at the cost of memory. Higher value of `accuracy` yields
better accuracy, `1.0/accuracy` is the relative error of the approximation.
percentile_approx(col, array(percentage1 [, percentage2]...) [, accuracy]) - Returns the approximate
percentile array of column `col` at the given percentage array. Each value of the
percentage array must be between 0.0 and 1.0. The `accuracy` parameter (default: 10000) is
a positive integer literal which controls approximation accuracy at the cost of memory.
Higher value of `accuracy` yields better accuracy, `1.0/accuracy` is the relative error of
the approximation.
Extended Usage:
No example for percentile_approx.
```
**After**
- `approx_count_distinct`
``` sql
Usage:
approx_count_distinct(expr[, relativeSD]) - Returns the estimated cardinality by HyperLogLog++.
`relativeSD` defines the maximum estimation error allowed.
Extended Usage:
No example/argument for approx_count_distinct.
```
- `percentile_approx`
``` sql
Usage:
percentile_approx(col, percentage [, accuracy]) - Returns the approximate percentile value of numeric
column `col` at the given percentage. The value of percentage must be between 0.0
and 1.0. The `accuracy` parameter (default: 10000) is a positive numeric literal which
controls approximation accuracy at the cost of memory. Higher value of `accuracy` yields
better accuracy, `1.0/accuracy` is the relative error of the approximation.
When `percentage` is an array, each value of the percentage array must be between 0.0 and 1.0.
In this case, returns the approximate percentile array of column `col` at the given
percentage array.
Extended Usage:
Examples:
> SELECT percentile_approx(10.0, array(0.5, 0.4, 0.1), 100);
[10.0,10.0,10.0]
> SELECT percentile_approx(10.0, 0.5, 100);
10.0
```
## How was this patch tested?
Manually tested
**When examples are multiple**
``` sql
spark-sql> describe function extended reflect;
Function: reflect
Class: org.apache.spark.sql.catalyst.expressions.CallMethodViaReflection
Usage: reflect(class, method[, arg1[, arg2 ..]]) - Calls a method with reflection.
Extended Usage:
Examples:
> SELECT reflect('java.util.UUID', 'randomUUID');
c33fb387-8500-4bfa-81d2-6e0e3e930df2
> SELECT reflect('java.util.UUID', 'fromString', 'a5cf6c42-0c85-418f-af6c-3e4e5b1328f2');
a5cf6c42-0c85-418f-af6c-3e4e5b1328f2
```
**When `Usage` is in single line**
``` sql
spark-sql> describe function extended min;
Function: min
Class: org.apache.spark.sql.catalyst.expressions.aggregate.Min
Usage: min(expr) - Returns the minimum value of `expr`.
Extended Usage:
No example/argument for min.
```
**When `Usage` is already in multiple lines**
``` sql
spark-sql> describe function extended percentile_approx;
Function: percentile_approx
Class: org.apache.spark.sql.catalyst.expressions.aggregate.ApproximatePercentile
Usage:
percentile_approx(col, percentage [, accuracy]) - Returns the approximate percentile value of numeric
column `col` at the given percentage. The value of percentage must be between 0.0
and 1.0. The `accuracy` parameter (default: 10000) is a positive numeric literal which
controls approximation accuracy at the cost of memory. Higher value of `accuracy` yields
better accuracy, `1.0/accuracy` is the relative error of the approximation.
When `percentage` is an array, each value of the percentage array must be between 0.0 and 1.0.
In this case, returns the approximate percentile array of column `col` at the given
percentage array.
Extended Usage:
Examples:
> SELECT percentile_approx(10.0, array(0.5, 0.4, 0.1), 100);
[10.0,10.0,10.0]
> SELECT percentile_approx(10.0, 0.5, 100);
10.0
```
**When example/argument is missing**
``` sql
spark-sql> describe function extended rank;
Function: rank
Class: org.apache.spark.sql.catalyst.expressions.Rank
Usage:
rank() - Computes the rank of a value in a group of values. The result is one plus the number
of rows preceding or equal to the current row in the ordering of the partition. The values
will produce gaps in the sequence.
Extended Usage:
No example/argument for rank.
```
Author: hyukjinkwon <gurwls223@gmail.com>
Closes#15677 from HyukjinKwon/SPARK-17963-1.
## What changes were proposed in this pull request?
Due to a limitation of hive metastore(table location must be directory path, not file path), we always store `path` for data source table in storage properties, instead of the `locationUri` field. However, we should not expose this difference to `CatalogTable` level, but just treat it as a hack in `HiveExternalCatalog`, like we store table schema of data source table in table properties.
This PR unifies `path` and `locationUri` outside of `HiveExternalCatalog`, both data source table and hive serde table should use the `locationUri` field.
This PR also unifies the way we handle default table location for managed table. Previously, the default table location of hive serde managed table is set by external catalog, but the one of data source table is set by command. After this PR, we follow the hive way and the default table location is always set by external catalog.
For managed non-file-based tables, we will assign a default table location and create an empty directory for it, the table location will be removed when the table is dropped. This is reasonable as metastore doesn't care about whether a table is file-based or not, and an empty table directory has no harm.
For external non-file-based tables, ideally we can omit the table location, but due to a hive metastore issue, we will assign a random location to it, and remove it right after the table is created. See SPARK-15269 for more details. This is fine as it's well isolated in `HiveExternalCatalog`.
To keep the existing behaviour of the `path` option, in this PR we always add the `locationUri` to storage properties using key `path`, before passing storage properties to `DataSource` as data source options.
## How was this patch tested?
existing tests.
Author: Wenchen Fan <wenchen@databricks.com>
Closes#15024 from cloud-fan/path.
## What changes were proposed in this pull request?
RuntimeReplaceable is used to create aliases for expressions, but the way it deals with type coercion is pretty weird (each expression is responsible for how to handle type coercion, which does not obey the normal implicit type cast rules).
This patch simplifies its handling by allowing the analyzer to traverse into the actual expression of a RuntimeReplaceable.
## How was this patch tested?
- Correctness should be guaranteed by existing unit tests already
- Removed SQLCompatibilityFunctionSuite and moved it sql-compatibility-functions.sql
- Added a new test case in sql-compatibility-functions.sql for verifying explain behavior.
Author: Reynold Xin <rxin@databricks.com>
Closes#15723 from rxin/SPARK-18214.
## What changes were proposed in this pull request?
When a user appended a column using a "nondeterministic" function to a DataFrame, e.g., `rand`, `randn`, and `monotonically_increasing_id`, the expected semantic is the following:
- The value in each row should remain unchanged, as if we materialize the column immediately, regardless of later DataFrame operations.
However, since we use `TaskContext.getPartitionId` to get the partition index from the current thread, the values from nondeterministic columns might change if we call `union` or `coalesce` after. `TaskContext.getPartitionId` returns the partition index of the current Spark task, which might not be the corresponding partition index of the DataFrame where we defined the column.
See the unit tests below or JIRA for examples.
This PR uses the partition index from `RDD.mapPartitionWithIndex` instead of `TaskContext` and fixes the partition initialization logic in whole-stage codegen, normal codegen, and codegen fallback. `initializeStatesForPartition(partitionIndex: Int)` was added to `Projection`, `Nondeterministic`, and `Predicate` (codegen) and initialized right after object creation in `mapPartitionWithIndex`. `newPredicate` now returns a `Predicate` instance rather than a function for proper initialization.
## How was this patch tested?
Unit tests. (Actually I'm not very confident that this PR fixed all issues without introducing new ones ...)
cc: rxin davies
Author: Xiangrui Meng <meng@databricks.com>
Closes#15567 from mengxr/SPARK-14393.
## What changes were proposed in this pull request?
This pr is to add pattern-matching entries for array data in `Literal.apply`.
## How was this patch tested?
Added tests in `LiteralExpressionSuite`.
Author: Takeshi YAMAMURO <linguin.m.s@gmail.com>
Closes#15257 from maropu/SPARK-17683.
## What changes were proposed in this pull request?
Simplify struct creation, especially the aspect of `CleanupAliases` which missed some aliases when handling trees created by `CreateStruct`.
This PR includes:
1. A failing test (create struct with nested aliases, some of the aliases survive `CleanupAliases`).
2. A fix that transforms `CreateStruct` into a `CreateNamedStruct` constructor, effectively eliminating `CreateStruct` from all expression trees.
3. A `NamePlaceHolder` used by `CreateStruct` when column names cannot be extracted from unresolved `NamedExpression`.
4. A new Analyzer rule that resolves `NamePlaceHolder` into a string literal once the `NamedExpression` is resolved.
5. `CleanupAliases` code was simplified as it no longer has to deal with `CreateStruct`'s top level columns.
## How was this patch tested?
Running all tests-suits in package org.apache.spark.sql, especially including the analysis suite, making sure added test initially fails, after applying suggested fix rerun the entire analysis package successfully.
Modified few tests that expected `CreateStruct` which is now transformed into `CreateNamedStruct`.
Author: eyal farago <eyal farago>
Author: Herman van Hovell <hvanhovell@databricks.com>
Author: eyal farago <eyal.farago@gmail.com>
Author: Eyal Farago <eyal.farago@actimize.com>
Author: Hyukjin Kwon <gurwls223@gmail.com>
Author: eyalfa <eyal.farago@gmail.com>
Closes#15718 from hvanhovell/SPARK-16839-2.
## What changes were proposed in this pull request?
Fix `Locale.US` for all usages of `DateFormat`, `NumberFormat`
## How was this patch tested?
Existing tests.
Author: Sean Owen <sowen@cloudera.com>
Closes#15610 from srowen/SPARK-18076.
## What changes were proposed in this pull request?
The PR fixes the bug that the QueryStartedEvent is not logged
the postToAll() in the original code is actually calling StreamingQueryListenerBus.postToAll() which has no listener at all....we shall post by sparkListenerBus.postToAll(s) and this.postToAll() to trigger local listeners as well as the listeners registered in LiveListenerBus
zsxwing
## How was this patch tested?
The following snapshot shows that QueryStartedEvent has been logged correctly
Author: CodingCat <zhunansjtu@gmail.com>
Closes#15675 from CodingCat/SPARK-18144.
## What changes were proposed in this pull request?
This patch adds support for all file formats in structured streaming sinks. This is actually a very small change thanks to all the previous refactoring done using the new internal commit protocol API.
## How was this patch tested?
Updated FileStreamSinkSuite to add test cases for json, text, and parquet.
Author: Reynold Xin <rxin@databricks.com>
Closes#15711 from rxin/SPARK-18192.
## What changes were proposed in this pull request?
There are a couple issues with the current 2.1 behavior when inserting into Datasource tables with partitions managed by Hive.
(1) OVERWRITE TABLE ... PARTITION will actually overwrite the entire table instead of just the specified partition.
(2) INSERT|OVERWRITE does not work with partitions that have custom locations.
This PR fixes both of these issues for Datasource tables managed by Hive. The behavior for legacy tables or when `manageFilesourcePartitions = false` is unchanged.
There is one other issue in that INSERT OVERWRITE with dynamic partitions will overwrite the entire table instead of just the updated partitions, but this behavior is pretty complicated to implement for Datasource tables. We should address that in a future release.
## How was this patch tested?
Unit tests.
Author: Eric Liang <ekl@databricks.com>
Closes#15705 from ericl/sc-4942.
## What changes were proposed in this pull request?
When the metadata logs for various parts of Structured Streaming are stored on non-HDFS filesystems such as NFS or ext4, the HDFSMetadataLog class leaves hidden HDFS-style checksum (CRC) files in the log directory, one file per batch. This PR modifies HDFSMetadataLog so that it detects the use of a filesystem that doesn't use CRC files and removes the CRC files.
## How was this patch tested?
Modified an existing test case in HDFSMetadataLogSuite to check whether HDFSMetadataLog correctly removes CRC files on the local POSIX filesystem. Ran the entire regression suite.
Author: frreiss <frreiss@us.ibm.com>
Closes#15027 from frreiss/fred-17475.
(Link to Jira issue: https://issues.apache.org/jira/browse/SPARK-17992)
## What changes were proposed in this pull request?
We recently added table partition pruning for partitioned Hive tables converted to using `TableFileCatalog`. When the Hive configuration option `hive.metastore.try.direct.sql` is set to `false`, Hive will throw an exception for unsupported filter expressions. For example, attempting to filter on an integer partition column will throw a `org.apache.hadoop.hive.metastore.api.MetaException`.
I discovered this behavior because VideoAmp uses the CDH version of Hive with a Postgresql metastore DB. In this configuration, CDH sets `hive.metastore.try.direct.sql` to `false` by default, and queries that filter on a non-string partition column will fail.
Rather than throw an exception in query planning, this patch catches this exception, logs a warning and returns all table partitions instead. Clients of this method are already expected to handle the possibility that the filters will not be honored.
## How was this patch tested?
A unit test was added.
Author: Michael Allman <michael@videoamp.com>
Closes#15673 from mallman/spark-17992-catch_hive_partition_filter_exception.
## What changes were proposed in this pull request?
Column.expr is private[sql], but it's an actually really useful field to have for debugging. We should open it up, similar to how we use QueryExecution.
## How was this patch tested?
N/A - this is a simple visibility change.
Author: Reynold Xin <rxin@databricks.com>
Closes#15724 from rxin/SPARK-18216.
## What changes were proposed in this pull request?
This patch adds a new commit protocol implementation ManifestFileCommitProtocol that follows the existing streaming flow, and uses it in FileStreamSink to consolidate the write path in structured streaming with the batch mode write path.
This deletes a lot of code, and would make it trivial to support other functionalities that are currently available in batch but not in streaming, including all file formats and bucketing.
## How was this patch tested?
Should be covered by existing tests.
Author: Reynold Xin <rxin@databricks.com>
Closes#15710 from rxin/SPARK-18025.
In SPARK-4761 / #3621 (December 2014) we enabled Kryo serialization by default in the Spark Thrift Server. However, I don't think that the original rationale for doing this still holds now that most Spark SQL serialization is now performed via encoders and our UnsafeRow format.
In addition, the use of Kryo as the default serializer can introduce performance problems because the creation of new KryoSerializer instances is expensive and we haven't performed instance-reuse optimizations in several code paths (including DirectTaskResult deserialization).
Given all of this, I propose to revert back to using JavaSerializer as the default serializer in the Thrift Server.
/cc liancheng
Author: Josh Rosen <joshrosen@databricks.com>
Closes#14906 from JoshRosen/disable-kryo-in-thriftserver.
## What changes were proposed in this pull request?
This PR proposes to add `to_json` function in contrast with `from_json` in Scala, Java and Python.
It'd be useful if we can convert a same column from/to json. Also, some datasources do not support nested types. If we are forced to save a dataframe into those data sources, we might be able to work around by this function.
The usage is as below:
``` scala
val df = Seq(Tuple1(Tuple1(1))).toDF("a")
df.select(to_json($"a").as("json")).show()
```
``` bash
+--------+
| json|
+--------+
|{"_1":1}|
+--------+
```
## How was this patch tested?
Unit tests in `JsonFunctionsSuite` and `JsonExpressionsSuite`.
Author: hyukjinkwon <gurwls223@gmail.com>
Closes#15354 from HyukjinKwon/SPARK-17764.
We now know it's a persistent environmental issue that is causing this test to sometimes fail. One hypothesis is that some configuration is leaked from another suite, and depending on suite ordering this can cause this test to fail.
I am planning on mining the jenkins logs to try to narrow down which suite could be causing this. For now, disable the test.
Author: Eric Liang <ekl@databricks.com>
Closes#15720 from ericl/disable-flaky-test.
## What changes were proposed in this pull request?
Aggregation Without Window/GroupBy expressions will fail in `checkAnalysis`, the error message is a bit misleading, we should generate a more specific error message for this case.
For example,
```
spark.read.load("/some-data")
.withColumn("date_dt", to_date($"date"))
.withColumn("year", year($"date_dt"))
.withColumn("week", weekofyear($"date_dt"))
.withColumn("user_count", count($"userId"))
.withColumn("daily_max_in_week", max($"user_count").over(weeklyWindow))
)
```
creates the following output:
```
org.apache.spark.sql.AnalysisException: expression '`randomColumn`' is neither present in the group by, nor is it an aggregate function. Add to group by or wrap in first() (or first_value) if you don't care which value you get.;
```
In the error message above, `randomColumn` doesn't appear in the query(acturally it's added by function `withColumn`), so the message is not enough for the user to address the problem.
## How was this patch tested?
Manually test
Before:
```
scala> spark.sql("select col, count(col) from tbl")
org.apache.spark.sql.AnalysisException: expression 'tbl.`col`' is neither present in the group by, nor is it an aggregate function. Add to group by or wrap in first() (or first_value) if you don't care which value you get.;;
```
After:
```
scala> spark.sql("select col, count(col) from tbl")
org.apache.spark.sql.AnalysisException: grouping expressions sequence is empty, and 'tbl.`col`' is not an aggregate function. Wrap '(count(col#231L) AS count(col)#239L)' in windowing function(s) or wrap 'tbl.`col`' in first() (or first_value) if you don't care which value you get.;;
```
Also add new test sqls in `group-by.sql`.
Author: jiangxingbo <jiangxb1987@gmail.com>
Closes#15672 from jiangxb1987/groupBy-empty.
## What changes were proposed in this pull request?
Likewise [DataSet.scala](https://github.com/apache/spark/blob/master/sql/core/src/main/scala/org/apache/spark/sql/Dataset.scala#L156) KeyValueGroupedDataset should mark the queryExecution as transient.
As mentioned in the Jira ticket, without transient we saw serialization issues like
```
Caused by: java.io.NotSerializableException: org.apache.spark.sql.execution.QueryExecution
Serialization stack:
- object not serializable (class: org.apache.spark.sql.execution.QueryExecution, value: ==
```
## How was this patch tested?
Run the query which is specified in the Jira ticket before and after:
```
val a = spark.createDataFrame(sc.parallelize(Seq((1,2),(3,4)))).as[(Int,Int)]
val grouped = a.groupByKey(
{x:(Int,Int)=>x._1}
)
val mappedGroups = grouped.mapGroups((k,x)=>
{(k,1)}
)
val yyy = sc.broadcast(1)
val last = mappedGroups.rdd.map(xx=>
{ val simpley = yyy.value 1 }
)
```
Author: Ergin Seyfe <eseyfe@fb.com>
Closes#15706 from seyfe/keyvaluegrouped_serialization.
## What changes were proposed in this pull request?
This is a follow-up to https://github.com/apache/spark/pull/15634.
## How was this patch tested?
N/A
Author: Liwei Lin <lwlin7@gmail.com>
Closes#15712 from lw-lin/18103.
## What changes were proposed in this pull request?
Simplify struct creation, especially the aspect of `CleanupAliases` which missed some aliases when handling trees created by `CreateStruct`.
This PR includes:
1. A failing test (create struct with nested aliases, some of the aliases survive `CleanupAliases`).
2. A fix that transforms `CreateStruct` into a `CreateNamedStruct` constructor, effectively eliminating `CreateStruct` from all expression trees.
3. A `NamePlaceHolder` used by `CreateStruct` when column names cannot be extracted from unresolved `NamedExpression`.
4. A new Analyzer rule that resolves `NamePlaceHolder` into a string literal once the `NamedExpression` is resolved.
5. `CleanupAliases` code was simplified as it no longer has to deal with `CreateStruct`'s top level columns.
## How was this patch tested?
running all tests-suits in package org.apache.spark.sql, especially including the analysis suite, making sure added test initially fails, after applying suggested fix rerun the entire analysis package successfully.
modified few tests that expected `CreateStruct` which is now transformed into `CreateNamedStruct`.
Credit goes to hvanhovell for assisting with this PR.
Author: eyal farago <eyal farago>
Author: eyal farago <eyal.farago@gmail.com>
Author: Herman van Hovell <hvanhovell@databricks.com>
Author: Eyal Farago <eyal.farago@actimize.com>
Author: Hyukjin Kwon <gurwls223@gmail.com>
Author: eyalfa <eyal.farago@gmail.com>
Closes#14444 from eyalfa/SPARK-16839_redundant_aliases_after_cleanupAliases.
## What changes were proposed in this pull request?
Currently an unqualified `getFunction(..)`call returns a wrong result; the returned function is shown as temporary function without a database. For example:
```
scala> sql("create function fn1 as 'org.apache.hadoop.hive.ql.udf.generic.GenericUDFAbs'")
res0: org.apache.spark.sql.DataFrame = []
scala> spark.catalog.getFunction("fn1")
res1: org.apache.spark.sql.catalog.Function = Function[name='fn1', className='org.apache.hadoop.hive.ql.udf.generic.GenericUDFAbs', isTemporary='true']
```
This PR fixes this by adding database information to ExpressionInfo (which is used to store the function information).
## How was this patch tested?
Added more thorough tests to `CatalogSuite`.
Author: Herman van Hovell <hvanhovell@databricks.com>
Closes#15542 from hvanhovell/SPARK-17996.
## What changes were proposed in this pull request?
When multiple records have the minimum value, the answer of ApproximatePercentile is wrong.
## How was this patch tested?
add a test case
Author: wangzhenhua <wangzhenhua@huawei.com>
Closes#15641 from wzhfy/percentile.
## What changes were proposed in this pull request?
As reported on the jira, insert overwrite statement runs much slower in Spark, compared with hive-client.
It seems there is a patch [HIVE-11940](ba21806b77) which largely improves insert overwrite performance on Hive. HIVE-11940 is patched after Hive 2.0.0.
Because Spark SQL uses older Hive library, we can not benefit from such improvement.
The reporter verified that there is also a big performance gap between Hive 1.2.1 (520.037 secs) and Hive 2.0.1 (35.975 secs) on insert overwrite execution.
Instead of upgrading to Hive 2.0 in Spark SQL, which might not be a trivial task, this patch provides an approach to delete the partition before asking Hive to load data files into the partition.
Note: The case reported on the jira is insert overwrite to partition. Since `Hive.loadTable` also uses the function to replace files, insert overwrite to table should has the same issue. We can take the same approach to delete the table first. I will upgrade this to include this.
## How was this patch tested?
Jenkins tests.
There are existing tests using insert overwrite statement. Those tests should be passed. I added a new test to specially test insert overwrite into partition.
For performance issue, as I don't have Hive 2.0 environment, this needs the reporter to verify it. Please refer to the jira.
Please review https://cwiki.apache.org/confluence/display/SPARK/Contributing+to+Spark before opening a pull request.
Author: Liang-Chi Hsieh <viirya@gmail.com>
Closes#15667 from viirya/improve-hive-insertoverwrite.
## What changes were proposed in this pull request?
This patch introduces an internal commit protocol API that is used by the batch data source to do write commits. It currently has only one implementation that uses Hadoop MapReduce's OutputCommitter API. In the future, this commit API can be used to unify streaming and batch commits.
## How was this patch tested?
Should be covered by existing write tests.
Author: Reynold Xin <rxin@databricks.com>
Author: Eric Liang <ekl@databricks.com>
Closes#15707 from rxin/SPARK-18024-2.
## What changes were proposed in this pull request?
This will re-run the flaky test a few times after it fails. This will help determine if it's due to nondeterministic test setup, or because of some environment issue (e.g. leaked config from another test).
cc yhuai
Author: Eric Liang <ekl@databricks.com>
Closes#15708 from ericl/spark-18167-3.
## What changes were proposed in this pull request?
When inserting into datasource tables with partitions managed by the hive metastore, we need to notify the metastore of newly added partitions. Previously this was implemented via `msck repair table`, but this is more expensive than needed.
This optimizes the insertion path to add only the updated partitions.
## How was this patch tested?
Existing tests (I verified manually that tests fail if the repair operation is omitted).
Author: Eric Liang <ekl@databricks.com>
Closes#15633 from ericl/spark-18087.
## What changes were proposed in this pull request?
One possibility for this test flaking is that we have corrupted the partition schema somehow in the tests, which causes the cast to decimal to fail in the call. This should at least show us the actual partition values.
## How was this patch tested?
Run it locally, it prints out something like `ArrayBuffer(test(partcol=0), test(partcol=1), test(partcol=2), test(partcol=3), test(partcol=4))`.
Author: Eric Liang <ekl@databricks.com>
Closes#15701 from ericl/print-more-info.
## What changes were proposed in this pull request?
The test `when schema inference is turned on, should read partition data` should not delete files because the source maybe is listing files. This PR just removes the delete actions since they are not necessary.
## How was this patch tested?
Jenkins
Author: Shixiong Zhu <shixiong@databricks.com>
Closes#15699 from zsxwing/SPARK-18030.
## What changes were proposed in this pull request?
### Problem
Iterative ML code may easily create query plans that grow exponentially. We found that query planning time also increases exponentially even when all the sub-plan trees are cached.
The following snippet illustrates the problem:
``` scala
(0 until 6).foldLeft(Seq(1, 2, 3).toDS) { (plan, iteration) =>
println(s"== Iteration $iteration ==")
val time0 = System.currentTimeMillis()
val joined = plan.join(plan, "value").join(plan, "value").join(plan, "value").join(plan, "value")
joined.cache()
println(s"Query planning takes ${System.currentTimeMillis() - time0} ms")
joined.as[Int]
}
// == Iteration 0 ==
// Query planning takes 9 ms
// == Iteration 1 ==
// Query planning takes 26 ms
// == Iteration 2 ==
// Query planning takes 53 ms
// == Iteration 3 ==
// Query planning takes 163 ms
// == Iteration 4 ==
// Query planning takes 700 ms
// == Iteration 5 ==
// Query planning takes 3418 ms
```
This is because when building a new Dataset, the new plan is always built upon `QueryExecution.analyzed`, which doesn't leverage existing cached plans.
On the other hand, usually, doing caching every a few iterations may not be the right direction for this problem since caching is too memory consuming (imaging computing connected components over a graph with 50 billion nodes). What we really need here is to truncate both the query plan (to minimize query planning time) and the lineage of the underlying RDD (to avoid stack overflow).
### Changes introduced in this PR
This PR tries to fix this issue by introducing a `checkpoint()` method into `Dataset[T]`, which does exactly the things described above. The following snippet, which is essentially the same as the one above but invokes `checkpoint()` instead of `cache()`, shows the micro benchmark result of this PR:
One key point is that the checkpointed Dataset should preserve the origianl partitioning and ordering information of the original Dataset, so that we can avoid unnecessary shuffling (similar to reading from a pre-bucketed table). This is done by adding `outputPartitioning` and `outputOrdering` to `LogicalRDD` and `RDDScanExec`.
### Micro benchmark
``` scala
spark.sparkContext.setCheckpointDir("/tmp/cp")
(0 until 100).foldLeft(Seq(1, 2, 3).toDS) { (plan, iteration) =>
println(s"== Iteration $iteration ==")
val time0 = System.currentTimeMillis()
val cp = plan.checkpoint()
cp.count()
System.out.println(s"Checkpointing takes ${System.currentTimeMillis() - time0} ms")
val time1 = System.currentTimeMillis()
val joined = cp.join(cp, "value").join(cp, "value").join(cp, "value").join(cp, "value")
val result = joined.as[Int]
println(s"Query planning takes ${System.currentTimeMillis() - time1} ms")
result
}
// == Iteration 0 ==
// Checkpointing takes 591 ms
// Query planning takes 13 ms
// == Iteration 1 ==
// Checkpointing takes 1605 ms
// Query planning takes 16 ms
// == Iteration 2 ==
// Checkpointing takes 782 ms
// Query planning takes 8 ms
// == Iteration 3 ==
// Checkpointing takes 729 ms
// Query planning takes 10 ms
// == Iteration 4 ==
// Checkpointing takes 734 ms
// Query planning takes 9 ms
// == Iteration 5 ==
// ...
// == Iteration 50 ==
// Checkpointing takes 571 ms
// Query planning takes 7 ms
// == Iteration 51 ==
// Checkpointing takes 548 ms
// Query planning takes 7 ms
// == Iteration 52 ==
// Checkpointing takes 596 ms
// Query planning takes 8 ms
// == Iteration 53 ==
// Checkpointing takes 568 ms
// Query planning takes 7 ms
// ...
```
You may see that although checkpointing is more heavy weight an operation, it always takes roughly the same amount of time to perform both checkpointing and query planning.
### Open question
mengxr mentioned that it would be more convenient if we can make `Dataset.checkpoint()` eager, i.e., always performs a `RDD.count()` after calling `RDD.checkpoint()`. Not quite sure whether this is a universal requirement. Maybe we can add a `eager: Boolean` argument for `Dataset.checkpoint()` to support that.
## How was this patch tested?
Unit test added in `DatasetSuite`.
Author: Cheng Lian <lian@databricks.com>
Author: Yin Huai <yhuai@databricks.com>
Closes#15651 from liancheng/ds-checkpoint.
## What changes were proposed in this pull request?
Because of the refactoring work in Structured Streaming, the event logs generated by Strucutred Streaming in Spark 2.0.0 and 2.0.1 cannot be parsed.
This PR just ignores these logs in ReplayListenerBus because no places use them.
## How was this patch tested?
- Generated events logs using Spark 2.0.0 and 2.0.1, and saved them as `structured-streaming-query-event-logs-2.0.0.txt` and `structured-streaming-query-event-logs-2.0.1.txt`
- The new added test makes sure ReplayListenerBus will skip these bad jsons.
Author: Shixiong Zhu <shixiong@databricks.com>
Closes#15663 from zsxwing/fix-event-log.
## What changes were proposed in this pull request?
Currently, `ANALYZE TABLE` command accepts `identifier` for option `NOSCAN`. This PR raises a ParseException for unknown option.
**Before**
```scala
scala> sql("create table test(a int)")
res0: org.apache.spark.sql.DataFrame = []
scala> sql("analyze table test compute statistics blah")
res1: org.apache.spark.sql.DataFrame = []
```
**After**
```scala
scala> sql("create table test(a int)")
res0: org.apache.spark.sql.DataFrame = []
scala> sql("analyze table test compute statistics blah")
org.apache.spark.sql.catalyst.parser.ParseException:
Expected `NOSCAN` instead of `blah`(line 1, pos 0)
```
## How was this patch tested?
Pass the Jenkins test with a new test case.
Author: Dongjoon Hyun <dongjoon@apache.org>
Closes#15640 from dongjoon-hyun/SPARK-18106.
## What changes were proposed in this pull request?
To reduce the number of components in SQL named *Catalog, rename *FileCatalog to *FileIndex. A FileIndex is responsible for returning the list of partitions / files to scan given a filtering expression.
```
TableFileCatalog => CatalogFileIndex
FileCatalog => FileIndex
ListingFileCatalog => InMemoryFileIndex
MetadataLogFileCatalog => MetadataLogFileIndex
PrunedTableFileCatalog => PrunedInMemoryFileIndex
```
cc yhuai marmbrus
## How was this patch tested?
N/A
Author: Eric Liang <ekl@databricks.com>
Author: Eric Liang <ekhliang@gmail.com>
Closes#15634 from ericl/rename-file-provider.
## What changes were proposed in this pull request?
The behavior of union is not well defined here. It is safer to explicitly execute these commands in order. The other use of `Union` in this way will be removed by https://github.com/apache/spark/pull/15633
## How was this patch tested?
Existing tests.
cc yhuai cloud-fan
Author: Eric Liang <ekhliang@gmail.com>
Author: Eric Liang <ekl@databricks.com>
Closes#15665 from ericl/spark-18146.
## What changes were proposed in this pull request?
org.apache.spark.sql.hive.execution.SQLQuerySuite is flaking when hive partition pruning is enabled.
Based on the stack traces, it seems to be an old issue where Hive fails to cast a numeric partition column ("Invalid character string format for type DECIMAL"). There are two possibilities here: either we are somehow corrupting the partition table to have non-decimal values in that column, or there is a transient issue with Derby.
This PR logs the result of the retry when this exception is encountered, so we can confirm what is going on.
## How was this patch tested?
n/a
cc yhuai
Author: Eric Liang <ekl@databricks.com>
Closes#15676 from ericl/spark-18167.
## What changes were proposed in this pull request?
Fixed the issue that ForeachSink didn't rethrow the exception.
## How was this patch tested?
The fixed unit test.
Author: Shixiong Zhu <shixiong@databricks.com>
Closes#15674 from zsxwing/foreach-sink-error.
## What changes were proposed in this pull request?
Issue:
Querying on a global temp view throws Table or view not found exception.
Fix:
Update the lookupRelation in HiveSessionCatalog to check for global temp views similar to the SessionCatalog.lookupRelation.
Before fix:
Querying on a global temp view ( for. e.g.: select * from global_temp.v1) throws Table or view not found exception
After fix:
Query succeeds and returns the right result.
## How was this patch tested?
- Two unit tests are added to check for global temp view for the code path when hive support is enabled.
- Regression unit tests were run successfully. ( build/sbt -Phive hive/test, build/sbt sql/test, build/sbt catalyst/test)
Author: Sunitha Kambhampati <skambha@us.ibm.com>
Closes#15649 from skambha/lookuprelationChanges.
## What changes were proposed in this pull request?
We should follow hive table and also store partition spec in metastore for data source table.
This brings 2 benefits:
1. It's more flexible to manage the table data files, as users can use `ADD PARTITION`, `DROP PARTITION` and `RENAME PARTITION`
2. We don't need to cache all file status for data source table anymore.
## How was this patch tested?
existing tests.
Author: Eric Liang <ekl@databricks.com>
Author: Michael Allman <michael@videoamp.com>
Author: Eric Liang <ekhliang@gmail.com>
Author: Wenchen Fan <wenchen@databricks.com>
Closes#15515 from cloud-fan/partition.
## What changes were proposed in this pull request?
A follow up PR for #14553 to fix the flaky test. It's flaky because the file list API doesn't guarantee any order of the return list.
## How was this patch tested?
Jenkins
Author: Shixiong Zhu <shixiong@databricks.com>
Closes#15661 from zsxwing/fix-StreamingQuerySuite.
## What changes were proposed in this pull request?
This PR is an enhancement of PR with commit ID:57dc326bd00cf0a49da971e9c573c48ae28acaa2.
NaN is a special type of value which is commonly seen as invalid. But We find that there are certain cases where NaN are also valuable, thus need special handling. We provided user when dealing NaN values with 3 options, to either reserve an extra bucket for NaN values, or remove the NaN values, or report an error, by setting handleNaN "keep", "skip", or "error"(default) respectively.
'''Before:
val bucketizer: Bucketizer = new Bucketizer()
.setInputCol("feature")
.setOutputCol("result")
.setSplits(splits)
'''After:
val bucketizer: Bucketizer = new Bucketizer()
.setInputCol("feature")
.setOutputCol("result")
.setSplits(splits)
.setHandleNaN("keep")
## How was this patch tested?
Tests added in QuantileDiscretizerSuite, BucketizerSuite and DataFrameStatSuite
Signed-off-by: VinceShieh <vincent.xieintel.com>
Author: VinceShieh <vincent.xie@intel.com>
Author: Vincent Xie <vincent.xie@intel.com>
Author: Joseph K. Bradley <joseph@databricks.com>
Closes#15428 from VinceShieh/spark-17219_followup.
## What changes were proposed in this pull request?
API and programming guide doc changes for Scala, Python and R.
## How was this patch tested?
manual test
Author: Felix Cheung <felixcheung_m@hotmail.com>
Closes#15629 from felixcheung/jsondoc.
## What changes were proposed in this pull request?
A short code snippet that uses toLocalIterator() on a dataframe produced by a RunnableCommand
reproduces the problem. toLocalIterator() is called by thriftserver when
`spark.sql.thriftServer.incrementalCollect`is set to handle queries producing large result
set.
**Before**
```SQL
scala> spark.sql("show databases")
res0: org.apache.spark.sql.DataFrame = [databaseName: string]
scala> res0.toLocalIterator()
16/10/26 03:00:24 ERROR Executor: Exception in task 0.0 in stage 0.0 (TID 0)
java.lang.ClassCastException: org.apache.spark.sql.catalyst.expressions.GenericInternalRow cannot be cast to org.apache.spark.sql.catalyst.expressions.UnsafeRow
```
**After**
```SQL
scala> spark.sql("drop database databases")
res30: org.apache.spark.sql.DataFrame = []
scala> spark.sql("show databases")
res31: org.apache.spark.sql.DataFrame = [databaseName: string]
scala> res31.toLocalIterator().asScala foreach println
[default]
[parquet]
```
## How was this patch tested?
Added a test in DDLSuite
Author: Dilip Biswal <dbiswal@us.ibm.com>
Closes#15642 from dilipbiswal/SPARK-18009.
## What changes were proposed in this pull request?
In order to facilitate the writing of additional Encoders, I proposed opening up the ObjectType SQL DataType. This DataType is used extensively in the JavaBean Encoder, but would also be useful in writing other custom encoders.
As mentioned by marmbrus, it is understood that the Expressions API is subject to potential change.
## How was this patch tested?
The change only affects the visibility of the ObjectType class, and the existing SQL test suite still runs without error.
Author: ALeksander Eskilson <alek.eskilson@cerner.com>
Closes#15453 from bdrillard/master.
## What changes were proposed in this pull request?
This PR contains changes to the Source trait such that the scheduler can notify data sources when it is safe to discard buffered data. Summary of changes:
* Added a method `commit(end: Offset)` that tells the Source that is OK to discard all offsets up `end`, inclusive.
* Changed the semantics of a `None` value for the `getBatch` method to mean "from the very beginning of the stream"; as opposed to "all data present in the Source's buffer".
* Added notes that the upper layers of the system will never call `getBatch` with a start value less than the last value passed to `commit`.
* Added a `lastCommittedOffset` method to allow the scheduler to query the status of each Source on restart. This addition is not strictly necessary, but it seemed like a good idea -- Sources will be maintaining their own persistent state, and there may be bugs in the checkpointing code.
* The scheduler in `StreamExecution.scala` now calls `commit` on its stream sources after marking each batch as complete in its checkpoint.
* `MemoryStream` now cleans committed batches out of its internal buffer.
* `TextSocketSource` now cleans committed batches from its internal buffer.
## How was this patch tested?
Existing regression tests already exercise the new code.
Author: frreiss <frreiss@us.ibm.com>
Closes#14553 from frreiss/fred-16963.
## What changes were proposed in this pull request?
Currently we have several test cases for group analytics(ROLLUP/CUBE/GROUPING SETS) in `SQLQuerySuite`, should better move them into a query file test.
The following test cases are moved to `group-analytics.sql`:
```
test("rollup")
test("grouping sets when aggregate functions containing groupBy columns")
test("cube")
test("grouping sets")
test("grouping and grouping_id")
test("grouping and grouping_id in having")
test("grouping and grouping_id in sort")
```
This is followup work of #15582
## How was this patch tested?
Modified query file `group-analytics.sql`, which will be tested by `SQLQueryTestSuite`.
Author: jiangxingbo <jiangxb1987@gmail.com>
Closes#15624 from jiangxb1987/group-analytics-test.
## What changes were proposed in this pull request?
The `UnaryNode.getAliasedConstraints` function fails to replace all expressions by their alias where constraints contains more than one expression to be replaced.
For example:
```
val tr = LocalRelation('a.int, 'b.string, 'c.int)
val multiAlias = tr.where('a === 'c + 10).select('a.as('x), 'c.as('y))
multiAlias.analyze.constraints
```
currently outputs:
```
ExpressionSet(Seq(
IsNotNull(resolveColumn(multiAlias.analyze, "x")),
IsNotNull(resolveColumn(multiAlias.analyze, "y"))
)
```
The constraint `resolveColumn(multiAlias.analyze, "x") === resolveColumn(multiAlias.analyze, "y") + 10)` is missing.
## How was this patch tested?
Add new test cases in `ConstraintPropagationSuite`.
Author: jiangxingbo <jiangxb1987@gmail.com>
Closes#15597 from jiangxb1987/alias-constraints.
## What changes were proposed in this pull request?
Calling `Await.result` will allow other tasks to be run on the same thread when using ForkJoinPool. However, SQL uses a `ThreadLocal` execution id to trace Spark jobs launched by a query, which doesn't work perfectly in ForkJoinPool.
This PR just uses `Awaitable.result` instead to prevent ForkJoinPool from running other tasks in the current waiting thread.
## How was this patch tested?
Jenkins
Author: Shixiong Zhu <shixiong@databricks.com>
Closes#15520 from zsxwing/SPARK-13747.
…rdless of warehouse dir's existence
## What changes were proposed in this pull request?
Appending a trailing slash, if there already isn't one for the
sake comparison of the two paths. It doesn't take away from
the essence of the check, but removes any potential mismatch
due to lack of trailing slash.
## How was this patch tested?
Ran unit tests and they passed.
Author: Mark Grover <mark@apache.org>
Closes#15623 from markgrover/spark-18093.
## What changes were proposed in this pull request?
The function `QueryPlan.inferAdditionalConstraints` and `UnaryNode.getAliasedConstraints` can produce a non-converging set of constraints for recursive functions. For instance, if we have two constraints of the form(where a is an alias):
`a = b, a = f(b, c)`
Applying both these rules in the next iteration would infer:
`f(b, c) = f(f(b, c), c)`
This process repeated, the iteration won't converge and the set of constraints will grow larger and larger until OOM.
~~To fix this problem, we collect alias from expressions and skip infer constraints if we are to transform an `Expression` to another which contains it.~~
To fix this problem, we apply additional check in `inferAdditionalConstraints`, when it's possible to generate recursive constraints, we skip generate that.
## How was this patch tested?
Add new testcase in `SQLQuerySuite`/`InferFiltersFromConstraintsSuite`.
Author: jiangxingbo <jiangxb1987@gmail.com>
Closes#15319 from jiangxb1987/constraints.
## What changes were proposed in this pull request?
On null next exception in JDBC, don't init it as cause or suppressed
## How was this patch tested?
Existing tests
Author: Sean Owen <sowen@cloudera.com>
Closes#15599 from srowen/SPARK-18022.
### What changes were proposed in this pull request?
```SQL
CREATE TABLE tab1(col1 int COMMENT 'a', col2 int) USING parquet
INSERT INTO TABLE tab1 SELECT 1, 2
```
The insert attempt will fail if the target table has a column with comments. The error is strange to the external users:
```
assertion failed: No plan for InsertIntoTable Relation[col1#15,col2#16] parquet, false, false
+- Project [1 AS col1#19, 2 AS col2#20]
+- OneRowRelation$
```
This PR is to fix the above bug by checking the metadata when comparing the schema between the table and the query. If not matched, we also copy the metadata. This is an alternative to https://github.com/apache/spark/pull/15266
### How was this patch tested?
Added a test case
Author: gatorsmile <gatorsmile@gmail.com>
Closes#15615 from gatorsmile/insertDataSourceTableWithCommentSolution2.
## What changes were proposed in this pull request?
Binary operator requires its inputs to be of same type, but it should not consider nullability, e.g. `EqualTo` should be able to compare an element-nullable array and an element-non-nullable array.
## How was this patch tested?
a regression test in `DataFrameSuite`
Author: Wenchen Fan <wenchen@databricks.com>
Closes#15606 from cloud-fan/type-bug.
## What changes were proposed in this pull request?
Currently we always lowercase the partition columns of partition spec in parser, with the assumption that table partition columns are always lowercased.
However, this is not true for data source tables, which are case preserving. It's safe for now because data source tables don't store partition spec in metastore and don't support `ADD PARTITION`, `DROP PARTITION`, `RENAME PARTITION`, but we should make our code future-proof.
This PR makes partition spec case preserving at parser, and improve the `PreprocessTableInsertion` analyzer rule to normalize the partition columns in partition spec, w.r.t. the table partition columns.
## How was this patch tested?
existing tests.
Author: Wenchen Fan <wenchen@databricks.com>
Closes#15566 from cloud-fan/partition-spec.
### What changes were proposed in this pull request?
This follow-up PR is for addressing the [comment](https://github.com/apache/spark/pull/15048).
We added two test cases based on the suggestion from yhuai . One is a new test case using the `saveAsTable` API to create a data source table. Another is for CTAS on Hive serde table.
Note: No need to backport this PR to 2.0. Will submit a new PR to backport the whole fix with new test cases to Spark 2.0
### How was this patch tested?
N/A
Author: gatorsmile <gatorsmile@gmail.com>
Closes#15459 from gatorsmile/ctasOptimizedTestCases.
## What changes were proposed in this pull request?
Simplify/cleanup TableFileCatalog:
1. pass a `CatalogTable` instead of `databaseName` and `tableName` into `TableFileCatalog`, so that we don't need to fetch table metadata from metastore again
2. In `TableFileCatalog.filterPartitions0`, DO NOT set `PartitioningAwareFileCatalog.BASE_PATH_PARAM`. According to the [classdoc](https://github.com/apache/spark/blob/master/sql/core/src/main/scala/org/apache/spark/sql/execution/datasources/PartitioningAwareFileCatalog.scala#L189-L209), the default value of `basePath` already satisfies our need. What's more, if we set this parameter, we may break the case 2 which is metioned in the classdoc.
3. add `equals` and `hashCode` to `TableFileCatalog`
4. add `SessionCatalog.listPartitionsByFilter` which handles case sensitivity.
## How was this patch tested?
existing tests.
Author: Wenchen Fan <wenchen@databricks.com>
Closes#15568 from cloud-fan/table-file-catalog.
## What changes were proposed in this pull request?
The reason for the flakiness was follows. The test starts the maintenance background thread, and then writes 20 versions of the state store. The maintenance thread is expected to create snapshots in the middle, and clean up old files that are not needed any more. The earliest delta file (1.delta) is expected to be deleted as snapshots will ensure that the earliest delta would not be needed.
However, the default configuration for the maintenance thread is to retain files such that last 2 versions can be recovered, and delete the rest. Now while generating the versions, the maintenance thread can kick in and create snapshots anywhere between version 10 and 20 (at least 10 deltas needed for snapshot). Then later it will choose to retain only version 20 and 19 (last 2). There are two cases.
- Common case: One of the version between 10 and 19 gets snapshotted. Then recovering versions 19 and 20 just needs 19.snapshot and 20.delta, so 1.delta gets deleted.
- Uncommon case (reason for flakiness): Only version 20 gets snapshotted. Then recovering versoin 20 requires 20.snapshot, and recovering version 19 all the previous 19...1.delta. So 1.delta does not get deleted.
This PR rearranges the checks such that it create 20 versions, and then waits that there is at least one snapshot, then creates another 20. This will ensure that the latest 2 versions cannot require anything older than the first snapshot generated, and therefore will 1.delta will be deleted.
In addition, I have added more logs, and comments that I felt would help future debugging and understanding what is going on.
## How was this patch tested?
Ran the StateStoreSuite > 6K times in a heavily loaded machine (10 instances of tests running in parallel). No failures.
Author: Tathagata Das <tathagata.das1565@gmail.com>
Closes#15592 from tdas/SPARK-17624.
## What changes were proposed in this pull request?
Always resolve spark.sql.warehouse.dir as a local path, and as relative to working dir not home dir
## How was this patch tested?
Existing tests.
Author: Sean Owen <sowen@cloudera.com>
Closes#15382 from srowen/SPARK-17810.
## What changes were proposed in this pull request?
The PR tries to fix [SPARK-18058](https://issues.apache.org/jira/browse/SPARK-18058) which refers to a bug that the column types are compared with the extra care about Nullability in Union and SetOperation.
This PR converts the columns types by setting all fields as nullable before comparison
## How was this patch tested?
regular unit test cases
Author: CodingCat <zhunansjtu@gmail.com>
Closes#15595 from CodingCat/SPARK-18058.
## What changes were proposed in this pull request?
The testsuite `HiveDataFrameAnalyticsSuite` has nothing to do with HIVE, we should move it to package `sql`.
The original test cases in that suite are splited into two existing testsuites: `DataFrameAggregateSuite` tests for the functions and ~~`SQLQuerySuite`~~`SQLQueryTestSuite` tests for the SQL statements.
## How was this patch tested?
~~Modified `SQLQuerySuite` in package `sql`.~~
Add query file for `SQLQueryTestSuite`.
Author: jiangxingbo <jiangxb1987@gmail.com>
Closes#15582 from jiangxb1987/group-analytics-test.
## What changes were proposed in this pull request?
Jira : https://issues.apache.org/jira/browse/SPARK-18038
This was a suggestion by rxin over one of the dev list discussion : http://apache-spark-developers-list.1001551.n3.nabble.com/Project-not-preserving-child-partitioning-td19417.html
His words:
>> It would be better (safer) to move the output partitioning definition into each of the operator and remove it from UnaryExecNode.
With this PR, following is the output partitioning and ordering for all the impls of `UnaryExecNode`.
UnaryExecNode's impl | outputPartitioning | outputOrdering | comment
------------ | ------------- | ------------ | ------------
AppendColumnsExec | child's | Nil | child's ordering can be used
AppendColumnsWithObjectExec | child's | Nil | child's ordering can be used
BroadcastExchangeExec | BroadcastPartitioning | Nil | -
CoalesceExec | UnknownPartitioning | Nil | -
CollectLimitExec | SinglePartition | Nil | -
DebugExec | child's | Nil | child's ordering can be used
DeserializeToObjectExec | child's | Nil | child's ordering can be used
ExpandExec | UnknownPartitioning | Nil | -
FilterExec | child's | child's | -
FlatMapGroupsInRExec | child's | Nil | child's ordering can be used
GenerateExec | child's | Nil | need to dig more
GlobalLimitExec | child's | child's | -
HashAggregateExec | child's | Nil | -
InputAdapter | child's | child's | -
InsertIntoHiveTable | child's | Nil | terminal node, doesn't need partitioning
LocalLimitExec | child's | child's | -
MapElementsExec | child's | child's | -
MapGroupsExec | child's | Nil | child's ordering can be used
MapPartitionsExec | child's | Nil | child's ordering can be used
ProjectExec | child's | child's | -
SampleExec | child's | Nil | child's ordering can be used
ScriptTransformation | child's | Nil | child's ordering can be used
SerializeFromObjectExec | child's | Nil | child's ordering can be used
ShuffleExchange | custom | Nil | -
SortAggregateExec | child's | sort over grouped exprs | -
SortExec | child's | custom | -
StateStoreRestoreExec | child's | Nil | child's ordering can be used
StateStoreSaveExec | child's | Nil | child's ordering can be used
SubqueryExec | child's | child's | -
TakeOrderedAndProjectExec | SinglePartition | custom | -
WholeStageCodegenExec | child's | child's | -
WindowExec | child's | child's | -
## How was this patch tested?
This does NOT change any existing functionality so relying on existing tests
Author: Tejas Patil <tejasp@fb.com>
Closes#15575 from tejasapatil/SPARK-18038_UnaryNodeExec_output_partitioning.
## What changes were proposed in this pull request?
Jira: https://issues.apache.org/jira/browse/SPARK-18035
In HiveInspectors, I saw that converting Java map to Spark's `ArrayBasedMapData` spent quite sometime in buffer copying : https://github.com/apache/spark/blob/master/sql/hive/src/main/scala/org/apache/spark/sql/hive/HiveInspectors.scala#L658
The reason being `map.toSeq` allocates a new buffer and copies the map entries to it: https://github.com/scala/scala/blob/2.11.x/src/library/scala/collection/MapLike.scala#L323
This copy is not needed as we get rid of it once we extract the key and value arrays.
Here is the call trace:
```
org.apache.spark.sql.hive.HiveInspectors$$anonfun$unwrapperFor$41.apply(HiveInspectors.scala:664)
scala.collection.AbstractMap.toSeq(Map.scala:59)
scala.collection.MapLike$class.toSeq(MapLike.scala:323)
scala.collection.AbstractMap.toBuffer(Map.scala:59)
scala.collection.MapLike$class.toBuffer(MapLike.scala:326)
scala.collection.AbstractTraversable.copyToBuffer(Traversable.scala:104)
scala.collection.TraversableOnce$class.copyToBuffer(TraversableOnce.scala:275)
scala.collection.mutable.ArrayBuffer.$plus$plus$eq(ArrayBuffer.scala:48)
scala.collection.mutable.ArrayBuffer.$plus$plus$eq(ArrayBuffer.scala:104)
scala.collection.generic.Growable$class.$plus$plus$eq(Growable.scala:59)
scala.collection.AbstractIterable.foreach(Iterable.scala:54)
scala.collection.IterableLike$class.foreach(IterableLike.scala:72)
scala.collection.AbstractIterator.foreach(Iterator.scala:1336)
scala.collection.Iterator$class.foreach(Iterator.scala:893)
scala.collection.generic.Growable$$anonfun$$plus$plus$eq$1.apply(Growable.scala:59)
scala.collection.generic.Growable$$anonfun$$plus$plus$eq$1.apply(Growable.scala:59)
```
Also, earlier code was populating keys and values arrays separately by iterating twice. The PR avoids double iteration of the map and does it in one iteration.
EDIT: During code review, there were several more places in the code which were found to do similar thing. The PR dedupes those instances and introduces convenient APIs which are performant and memory efficient
## Performance gains
The number is subjective and depends on how many map columns are accessed in the query and average entries per map. For one the queries that I tried out, I saw 3% CPU savings (end-to-end) for the query.
## How was this patch tested?
This does not change the end result produced so relying on existing tests.
Author: Tejas Patil <tejasp@fb.com>
Closes#15573 from tejasapatil/SPARK-18035_avoid_toSeq.
## What changes were proposed in this pull request?
In SPARK-16980, we removed the full in-memory cache of table partitions in favor of loading only needed partitions from the metastore. This greatly improves the initial latency of queries that only read a small fraction of table partitions.
However, since the metastore does not store file statistics, we need to discover those from remote storage. With the loss of the in-memory file status cache this has to happen on each query, increasing the latency of repeated queries over the same partitions.
The proposal is to add back a per-table cache of partition contents, i.e. Map[Path, Array[FileStatus]]. This cache would be retained per-table, and can be invalidated through refreshTable() and refreshByPath(). Unlike the prior cache, it can be incrementally updated as new partitions are read.
## How was this patch tested?
Existing tests and new tests in `HiveTablePerfStatsSuite`.
cc mallman
Author: Eric Liang <ekl@databricks.com>
Author: Michael Allman <michael@videoamp.com>
Author: Eric Liang <ekhliang@gmail.com>
Closes#15539 from ericl/meta-cache.
## What changes were proposed in this pull request?
Tiny follow-up to SPARK-16606 / https://github.com/apache/spark/pull/14533 , to correct more instances of the same log message typo
## How was this patch tested?
Existing tests (no functional change anyway)
Author: Sean Owen <sowen@cloudera.com>
Closes#15586 from srowen/SPARK-16606.2.
## What changes were proposed in this pull request?
This patch adds a new "path" method on OutputWriter that returns the path of the file written by the OutputWriter. This is part of the necessary work to consolidate structured streaming and batch write paths.
The batch write path has a nice feature that each data source can define the extension of the files, and allow Spark to specify the staging directory and the prefix for the files. However, in the streaming path we need to collect the list of files written, and there is no interface right now to do that.
## How was this patch tested?
N/A - there is no behavior change and this should be covered by existing tests.
Author: Reynold Xin <rxin@databricks.com>
Closes#15580 from rxin/SPARK-18042.
## What changes were proposed in this pull request?
In `FileStreamSource.getBatch`, we will create a `DataSource` with specified schema, to avoid inferring the schema again and again. However, we don't pass the partition columns, and will infer the partition again and again.
This PR fixes it by keeping the partition columns in `FileStreamSource`, like schema.
## How was this patch tested?
N/A
Author: Wenchen Fan <wenchen@databricks.com>
Closes#15581 from cloud-fan/stream.
## What changes were proposed in this pull request?
StreamingQueryStatus exposed through StreamingQueryListener often needs to be recorded (similar to SparkListener events). This PR adds `.json` and `.prettyJson` to `StreamingQueryStatus`, `SourceStatus` and `SinkStatus`.
## How was this patch tested?
New unit tests
Author: Tathagata Das <tathagata.das1565@gmail.com>
Closes#15476 from tdas/SPARK-17926.
## What changes were proposed in this pull request?
`Array[T]()` -> `Array.empty[T]` to avoid allocating 0-length arrays.
Use regex `find . -name '*.scala' | xargs -i bash -c 'egrep "Array\[[A-Za-z]+\]\(\)" -n {} && echo {}'` to find modification candidates.
cc srowen
## How was this patch tested?
existing tests
Author: Zheng RuiFeng <ruifengz@foxmail.com>
Closes#15564 from zhengruifeng/avoid_0_length_array.
## What changes were proposed in this pull request?
In `PruneFileSourcePartitions`, we will replace the `LogicalRelation` with a pruned one. However, this replacement may change the output of the `LogicalRelation` if it doesn't have `expectedOutputAttributes`. This PR fixes it.
## How was this patch tested?
the new `PruneFileSourcePartitionsSuite`
Author: Wenchen Fan <wenchen@databricks.com>
Closes#15569 from cloud-fan/partition-bug.
## What changes were proposed in this pull request?
My hunch is `mkdirs` fails. Just add more checks to collect more info.
## How was this patch tested?
Jenkins
Author: Shixiong Zhu <shixiong@databricks.com>
Closes#15577 from zsxwing/SPARK-18030-debug.
## What changes were proposed in this pull request?
Currently each data source OutputWriter is responsible for specifying the entire file name for each file output. This, however, does not make any sense because we rely on file naming schemes for certain behaviors in Spark SQL, e.g. bucket id. The current approach allows individual data sources to break the implementation of bucketing.
On the flip side, we also don't want to move file naming entirely out of data sources, because different data sources do want to specify different extensions.
This patch divides file name specification into two parts: the first part is a prefix specified by the caller of OutputWriter (in WriteOutput), and the second part is the suffix that can be specified by the OutputWriter itself. Note that a side effect of this change is that now all file based data sources also support bucketing automatically.
There are also some other minor cleanups:
- Removed the UUID passed through generic Configuration string
- Some minor rewrites for better clarity
- Renamed "path" in multiple places to "stagingDir", to more accurately reflect its meaning
## How was this patch tested?
This should be covered by existing data source tests.
Author: Reynold Xin <rxin@databricks.com>
Closes#15562 from rxin/SPARK-18021.
## What changes were proposed in this pull request?
Add mapValues to KeyValueGroupedDataset
## How was this patch tested?
New test in DatasetSuite for groupBy function, mapValues, flatMap
Author: Koert Kuipers <koert@tresata.com>
Closes#13526 from koertkuipers/feat-keyvaluegroupeddataset-mapvalues.
## What changes were proposed in this pull request?
Jira : https://issues.apache.org/jira/browse/SPARK-17698
`ExtractEquiJoinKeys` is incorrectly using filter predicates as the join condition for joins. `canEvaluate` [0] tries to see if the an `Expression` can be evaluated using output of a given `Plan`. In case of filter predicates (eg. `a.id='1'`), the `Expression` passed for the right hand side (ie. '1' ) is a `Literal` which does not have any attribute references. Thus `expr.references` is an empty set which theoretically is a subset of any set. This leads to `canEvaluate` returning `true` and `a.id='1'` is treated as a join predicate. While this does not lead to incorrect results but in case of bucketed + sorted tables, we might miss out on avoiding un-necessary shuffle + sort. See example below:
[0] : https://github.com/apache/spark/blob/master/sql/catalyst/src/main/scala/org/apache/spark/sql/catalyst/expressions/predicates.scala#L91
eg.
```
val df = (1 until 10).toDF("id").coalesce(1)
hc.sql("DROP TABLE IF EXISTS table1").collect
df.write.bucketBy(8, "id").sortBy("id").saveAsTable("table1")
hc.sql("DROP TABLE IF EXISTS table2").collect
df.write.bucketBy(8, "id").sortBy("id").saveAsTable("table2")
sqlContext.sql("""
SELECT a.id, b.id
FROM table1 a
FULL OUTER JOIN table2 b
ON a.id = b.id AND a.id='1' AND b.id='1'
""").explain(true)
```
BEFORE: This is doing shuffle + sort over table scan outputs which is not needed as both tables are bucketed and sorted on the same columns and have same number of buckets. This should be a single stage job.
```
SortMergeJoin [id#38, cast(id#38 as double), 1.0], [id#39, 1.0, cast(id#39 as double)], FullOuter
:- *Sort [id#38 ASC NULLS FIRST, cast(id#38 as double) ASC NULLS FIRST, 1.0 ASC NULLS FIRST], false, 0
: +- Exchange hashpartitioning(id#38, cast(id#38 as double), 1.0, 200)
: +- *FileScan parquet default.table1[id#38] Batched: true, Format: ParquetFormat, InputPaths: file:spark-warehouse/table1, PartitionFilters: [], PushedFilters: [], ReadSchema: struct<id:int>
+- *Sort [id#39 ASC NULLS FIRST, 1.0 ASC NULLS FIRST, cast(id#39 as double) ASC NULLS FIRST], false, 0
+- Exchange hashpartitioning(id#39, 1.0, cast(id#39 as double), 200)
+- *FileScan parquet default.table2[id#39] Batched: true, Format: ParquetFormat, InputPaths: file:spark-warehouse/table2, PartitionFilters: [], PushedFilters: [], ReadSchema: struct<id:int>
```
AFTER :
```
SortMergeJoin [id#32], [id#33], FullOuter, ((cast(id#32 as double) = 1.0) && (cast(id#33 as double) = 1.0))
:- *FileScan parquet default.table1[id#32] Batched: true, Format: ParquetFormat, InputPaths: file:spark-warehouse/table1, PartitionFilters: [], PushedFilters: [], ReadSchema: struct<id:int>
+- *FileScan parquet default.table2[id#33] Batched: true, Format: ParquetFormat, InputPaths: file:spark-warehouse/table2, PartitionFilters: [], PushedFilters: [], ReadSchema: struct<id:int>
```
## How was this patch tested?
- Added a new test case for this scenario : `SPARK-17698 Join predicates should not contain filter clauses`
- Ran all the tests in `BucketedReadSuite`
Author: Tejas Patil <tejasp@fb.com>
Closes#15272 from tejasapatil/SPARK-17698_join_predicate_filter_clause.
## What changes were proposed in this pull request?
SHOW COLUMNS command validates the user supplied database
name with database name from qualified table name name to make
sure both of them are consistent. This comparison should respect
case sensitivity.
## How was this patch tested?
Added tests in DDLSuite and existing tests were moved to use new sql based test infrastructure.
Author: Dilip Biswal <dbiswal@us.ibm.com>
Closes#15423 from dilipbiswal/dkb_show_column_fix.
## What changes were proposed in this pull request?
Currently, Spark 2.0 raises an `input path does not exist` AnalysisException if the file name contains '*'. It is misleading since it occurs when there exist some matched files. Also, it was a supported feature in Spark 1.6.2. This PR aims to support wildcard characters in filename for `LOAD DATA LOCAL INPATH` SQL command like Spark 1.6.2.
**Reported Error Scenario**
```scala
scala> sql("CREATE TABLE t(a string)")
res0: org.apache.spark.sql.DataFrame = []
scala> sql("LOAD DATA LOCAL INPATH '/tmp/x*' INTO TABLE t")
org.apache.spark.sql.AnalysisException: LOAD DATA input path does not exist: /tmp/x*;
```
## How was this patch tested?
Pass the Jenkins test with a new test case.
Author: Dongjoon Hyun <dongjoon@apache.org>
Closes#15376 from dongjoon-hyun/SPARK-17796.
## What changes were proposed in this pull request?
This should apply to non-converted metastore relations. WIP to see if this causes any test failures.
## How was this patch tested?
Existing tests.
Author: Eric Liang <ekl@databricks.com>
Closes#15475 from ericl/try-enabling-pruning.
## What changes were proposed in this pull request?
This patch refactors WriterContainer to simplify the logic and make control flow more obvious.The previous code setup made it pretty difficult to track the actual dependencies on variables and setups because the driver side and the executor side were using the same set of variables.
## How was this patch tested?
N/A - this should be covered by existing tests.
Author: Reynold Xin <rxin@databricks.com>
Closes#15551 from rxin/writercontainer-refactor.
## What changes were proposed in this pull request?
This PR proposes to check the second argument, `ascendingOrder` rather than throwing `ClassCastException` exception message.
```sql
select sort_array(array('b', 'd'), '1');
```
**Before**
```
16/10/19 13:16:08 ERROR SparkSQLDriver: Failed in [select sort_array(array('b', 'd'), '1')]
java.lang.ClassCastException: org.apache.spark.unsafe.types.UTF8String cannot be cast to java.lang.Boolean
at scala.runtime.BoxesRunTime.unboxToBoolean(BoxesRunTime.java:85)
at org.apache.spark.sql.catalyst.expressions.SortArray.nullSafeEval(collectionOperations.scala:185)
at org.apache.spark.sql.catalyst.expressions.BinaryExpression.eval(Expression.scala:416)
at org.apache.spark.sql.catalyst.optimizer.ConstantFolding$$anonfun$apply$1$$anonfun$applyOrElse$1.applyOrElse(expressions.scala:50)
at org.apache.spark.sql.catalyst.optimizer.ConstantFolding$$anonfun$apply$1$$anonfun$applyOrElse$1.applyOrElse(expressions.scala:43)
at org.apache.spark.sql.catalyst.trees.TreeNode$$anonfun$3.apply(TreeNode.scala:292)
at org.apache.spark.sql.catalyst.trees.TreeNode$$anonfun$3.apply(TreeNode.scala:292)
at org.apache.spark.sql.catalyst.trees.CurrentOrigin$.withOrigin(TreeNode.scala:74)
at org.apache.spark.sql.catalyst.trees.TreeNode.transformDown(TreeNode.scala:291)
at org.apache.spark.sql.catalyst.trees.TreeNode$$anonfun$transformDown$1.apply(TreeNode.scala:297)
```
**After**
```
Error in query: cannot resolve 'sort_array(array('b', 'd'), '1')' due to data type mismatch: Sort order in second argument requires a boolean literal.; line 1 pos 7;
```
## How was this patch tested?
Unit test in `DataFrameFunctionsSuite`.
Author: hyukjinkwon <gurwls223@gmail.com>
Closes#15532 from HyukjinKwon/SPARK-17989.
## What changes were proposed in this pull request?
Unlike Hive, in Spark SQL, ALTER TABLE RENAME TO cannot move a table from one database to another(e.g. `ALTER TABLE db1.tbl RENAME TO db2.tbl2`), and will report error if the database in source table and destination table is different. So in #14955 , we forbid users to specify database of destination table in ALTER TABLE RENAME TO, to be consistent with other database systems and also make it easier to rename tables in non-current database, e.g. users can write `ALTER TABLE db1.tbl RENAME TO tbl2`, instead of `ALTER TABLE db1.tbl RENAME TO db1.tbl2`.
However, this is a breaking change. Users may already have queries that specify database of destination table in ALTER TABLE RENAME TO.
This PR reverts most of #14955 , and simplify the usage of ALTER TABLE RENAME TO by making database of source table the default database of destination table, instead of current database, so that users can still write `ALTER TABLE db1.tbl RENAME TO tbl2`, which is consistent with other databases like MySQL, Postgres, etc.
## How was this patch tested?
The added back tests and some new tests.
Author: Wenchen Fan <wenchen@databricks.com>
Closes#15434 from cloud-fan/revert.
## What changes were proposed in this pull request?
There was a bug introduced in https://github.com/apache/spark/pull/14690 which broke refreshByPath with converted hive tables (though, it turns out it was very difficult to refresh converted hive tables anyways, since you had to specify the exact path of one of the partitions).
This changes refreshByPath to invalidate by prefix instead of exact match, and fixes the issue.
cc sameeragarwal for refreshByPath changes
mallman
## How was this patch tested?
Extended unit test.
Author: Eric Liang <ekl@databricks.com>
Closes#15521 from ericl/fix-caching.
## What changes were proposed in this pull request?
As per rxin request, here are further API changes
- Changed `Stream(Started/Progress/Terminated)` events to `Stream*Event`
- Changed the fields in `StreamingQueryListener.on***` from `query*` to `event`
## How was this patch tested?
Existing unit tests.
Author: Tathagata Das <tathagata.das1565@gmail.com>
Closes#15530 from tdas/SPARK-17731-1.
## What changes were proposed in this pull request?
This PR proposes to make `DataFrameReader.jdbc` call `DataFrameReader.format("jdbc").load` consistently with other APIs in `DataFrameReader`/`DataFrameWriter` and avoid calling `sparkSession.baseRelationToDataFrame(..)` here and there.
The changes were mostly copied from `DataFrameWriter.jdbc()` which was recently updated.
```diff
- val params = extraOptions.toMap ++ connectionProperties.asScala.toMap
- val options = new JDBCOptions(url, table, params)
- val relation = JDBCRelation(parts, options)(sparkSession)
- sparkSession.baseRelationToDataFrame(relation)
+ this.extraOptions = this.extraOptions ++ connectionProperties.asScala
+ // explicit url and dbtable should override all
+ this.extraOptions += ("url" -> url, "dbtable" -> table)
+ format("jdbc").load()
```
## How was this patch tested?
Existing tests should cover this.
Author: hyukjinkwon <gurwls223@gmail.com>
Closes#15499 from HyukjinKwon/SPARK-17955.
## What changes were proposed in this pull request?
This renames `BasicFileCatalog => FileCatalog`, combines `SessionFileCatalog` with `PartitioningAwareFileCatalog`, and removes the old `FileCatalog` trait.
In summary,
```
MetadataLogFileCatalog extends PartitioningAwareFileCatalog
ListingFileCatalog extends PartitioningAwareFileCatalog
PartitioningAwareFileCatalog extends FileCatalog
TableFileCatalog extends FileCatalog
```
(note that this is a re-submission of https://github.com/apache/spark/pull/15518 which got reverted)
## How was this patch tested?
Existing tests
Author: Eric Liang <ekl@databricks.com>
Closes#15533 from ericl/fix-scalastyle-revert.
## What changes were proposed in this pull request?
Currently, Spark only supports to infer `IntegerType`, `LongType`, `DoubleType` and `StringType`.
`DecimalType` is being tried but it seems it never infers type as `DecimalType` as `DoubleType` is being tried first. Also, it seems `DateType` and `TimestampType` could be inferred.
As far as I know, it is pretty common to use both for a partition column.
This PR fixes the incorrect `DecimalType` try and also adds the support for both `DateType` and `TimestampType` for inferring partition column type.
## How was this patch tested?
Unit tests in `ParquetPartitionDiscoverySuite`.
Author: hyukjinkwon <gurwls223@gmail.com>
Closes#14947 from HyukjinKwon/SPARK-17388.
## What changes were proposed in this pull request?
Debug mode should work for corrupted table, so that we can really debug
## How was this patch tested?
new test in `MetastoreDataSourcesSuite`
Author: Wenchen Fan <wenchen@databricks.com>
Closes#15528 from cloud-fan/debug.
## What changes were proposed in this pull request?
Scala 2.10 does not have Option.contains, which broke Scala 2.10 build.
## How was this patch tested?
Locally compiled and ran sql/core unit tests in 2.10
Author: Tathagata Das <tathagata.das1565@gmail.com>
Closes#15531 from tdas/metrics-flaky-test-fix-1.
This work has largely been done by lw-lin in his PR #15497. This is a slight refactoring of it.
## What changes were proposed in this pull request?
There were two sources of flakiness in StreamingQueryListener test.
- When testing with manual clock, consecutive attempts to advance the clock can occur without the stream execution thread being unblocked and doing some work between the two attempts. Hence the following can happen with the current ManualClock.
```
+-----------------------------------+--------------------------------+
| StreamExecution thread | testing thread |
+-----------------------------------+--------------------------------+
| ManualClock.waitTillTime(100) { | |
| _isWaiting = true | |
| wait(10) | |
| still in wait(10) | if (_isWaiting) advance(100) |
| still in wait(10) | if (_isWaiting) advance(200) | <- this should be disallowed !
| still in wait(10) | if (_isWaiting) advance(300) | <- this should be disallowed !
| wake up from wait(10) | |
| current time is 600 | |
| _isWaiting = false | |
| } | |
+-----------------------------------+--------------------------------+
```
- Second source of flakiness is that the adding data to memory stream may get processing in any trigger, not just the first trigger.
My fix is to make the manual clock wait for the other stream execution thread to start waiting for the clock at the right wait start time. That is, `advance(200)` (see above) will wait for stream execution thread to complete the wait that started at time 0, and start a new wait at time 200 (i.e. time stamp after the previous `advance(100)`).
In addition, since this is a feature that is solely used by StreamExecution, I removed all the non-generic code from ManualClock and put them in StreamManualClock inside StreamTest.
## How was this patch tested?
Ran existing unit test MANY TIME in Jenkins
Author: Tathagata Das <tathagata.das1565@gmail.com>
Author: Liwei Lin <lwlin7@gmail.com>
Closes#15519 from tdas/metrics-flaky-test-fix.
## What changes were proposed in this pull request?
This renames `BasicFileCatalog => FileCatalog`, combines `SessionFileCatalog` with `PartitioningAwareFileCatalog`, and removes the old `FileCatalog` trait.
In summary,
```
MetadataLogFileCatalog extends PartitioningAwareFileCatalog
ListingFileCatalog extends PartitioningAwareFileCatalog
PartitioningAwareFileCatalog extends FileCatalog
TableFileCatalog extends FileCatalog
```
cc cloud-fan mallman
## How was this patch tested?
Existing tests
Author: Eric Liang <ekl@databricks.com>
Closes#15518 from ericl/refactor-session-file-catalog.
## What changes were proposed in this pull request?
Reopens the closed PR https://github.com/apache/spark/pull/15190
(Please refer to the above link for review comments on the PR)
Make sure the hive.default.fileformat is used to when creating the storage format metadata.
Output
``` SQL
scala> spark.sql("SET hive.default.fileformat=orc")
res1: org.apache.spark.sql.DataFrame = [key: string, value: string]
scala> spark.sql("CREATE TABLE tmp_default(id INT)")
res2: org.apache.spark.sql.DataFrame = []
```
Before
```SQL
scala> spark.sql("DESC FORMATTED tmp_default").collect.foreach(println)
..
[# Storage Information,,]
[SerDe Library:,org.apache.hadoop.hive.serde2.lazy.LazySimpleSerDe,]
[InputFormat:,org.apache.hadoop.hive.ql.io.orc.OrcInputFormat,]
[OutputFormat:,org.apache.hadoop.hive.ql.io.orc.OrcOutputFormat,]
[Compressed:,No,]
[Storage Desc Parameters:,,]
[ serialization.format,1,]
```
After
```SQL
scala> spark.sql("DESC FORMATTED tmp_default").collect.foreach(println)
..
[# Storage Information,,]
[SerDe Library:,org.apache.hadoop.hive.ql.io.orc.OrcSerde,]
[InputFormat:,org.apache.hadoop.hive.ql.io.orc.OrcInputFormat,]
[OutputFormat:,org.apache.hadoop.hive.ql.io.orc.OrcOutputFormat,]
[Compressed:,No,]
[Storage Desc Parameters:,,]
[ serialization.format,1,]
```
## How was this patch tested?
(Please explain how this patch was tested. E.g. unit tests, integration tests, manual tests)
Added new tests to HiveDDLCommandSuite, SQLQuerySuite
Author: Dilip Biswal <dbiswal@us.ibm.com>
Closes#15495 from dilipbiswal/orc2.
### What changes were proposed in this pull request?
Dataset always does eager analysis now. Thus, `spark.sql.eagerAnalysis` is not used any more. Thus, we need to remove it.
This PR also outputs the plan. Without the fix, the analysis error is like
```
cannot resolve '`k1`' given input columns: [k, v]; line 1 pos 12
```
After the fix, the analysis error becomes:
```
org.apache.spark.sql.AnalysisException: cannot resolve '`k1`' given input columns: [k, v]; line 1 pos 12;
'Project [unresolvedalias(CASE WHEN ('k1 = 2) THEN 22 WHEN ('k1 = 4) THEN 44 ELSE 0 END, None), v#6]
+- SubqueryAlias t
+- Project [_1#2 AS k#5, _2#3 AS v#6]
+- LocalRelation [_1#2, _2#3]
```
### How was this patch tested?
N/A
Author: gatorsmile <gatorsmile@gmail.com>
Closes#15316 from gatorsmile/eagerAnalysis.
## What changes were proposed in this pull request?
Currently we use BufferedInputStream to read the shuffle file which copies the file content from os buffer cache to the user buffer. This adds additional latency in reading the spill files. We made a change to use java nio's direct buffer to read the spill files and for certain pipelines spilling significant amount of data, we see up to 7% speedup for the entire pipeline.
## How was this patch tested?
Tested by running the job in the cluster and observed up to 7% speedup.
Author: Sital Kedia <skedia@fb.com>
Closes#15408 from sitalkedia/skedia/nio_spill_read.
## What changes were proposed in this pull request?
Added a `prettyname` for current_database function.
## How was this patch tested?
Manually.
Before:
```
scala> sql("select current_database()").show
+-----------------+
|currentdatabase()|
+-----------------+
| default|
+-----------------+
```
After:
```
scala> sql("select current_database()").show
+------------------+
|current_database()|
+------------------+
| default|
+------------------+
```
Author: Weiqing Yang <yangweiqing001@gmail.com>
Closes#15506 from weiqingy/prettyName.
### What changes were proposed in this pull request?
Just document the impact of `spark.sql.debug`:
When enabling the debug, Spark SQL internal table properties are not filtered out; however, some related DDL commands (e.g., Analyze Table and CREATE TABLE LIKE) might not work properly.
### How was this patch tested?
N/A
Author: gatorsmile <gatorsmile@gmail.com>
Closes#15494 from gatorsmile/addDocForSQLDebug.
## What changes were proposed in this pull request?
Currently, Spark Thrift Server ignores the default database in URI. This PR supports that like the following.
```sql
$ bin/beeline -u jdbc:hive2://localhost:10000 -e "create database testdb"
$ bin/beeline -u jdbc:hive2://localhost:10000/testdb -e "create table t(a int)"
$ bin/beeline -u jdbc:hive2://localhost:10000/testdb -e "show tables"
...
+------------+--------------+--+
| tableName | isTemporary |
+------------+--------------+--+
| t | false |
+------------+--------------+--+
1 row selected (0.347 seconds)
$ bin/beeline -u jdbc:hive2://localhost:10000 -e "show tables"
...
+------------+--------------+--+
| tableName | isTemporary |
+------------+--------------+--+
+------------+--------------+--+
No rows selected (0.098 seconds)
```
## How was this patch tested?
Manual.
Note: I tried to add a test case for this, but I cannot found a suitable testsuite for this. I'll add the testcase if some advice is given.
Author: Dongjoon Hyun <dongjoon@apache.org>
Closes#15399 from dongjoon-hyun/SPARK-17819.
## What changes were proposed in this pull request?
### Before:
```scala
SparkSession.builder()
.master("local")
.appName("Word Count")
.config("spark.some.config.option", "some-value").
.getOrCreate()
```
### After:
```scala
SparkSession.builder()
.master("local")
.appName("Word Count")
.config("spark.some.config.option", "some-value")
.getOrCreate()
```
There was one unexpected dot!
Author: Jun Kim <i2r.jun@gmail.com>
Closes#15498 from tae-jun/SPARK-17953.
(This PR addresses https://issues.apache.org/jira/browse/SPARK-16980.)
## What changes were proposed in this pull request?
In a new Spark session, when a partitioned Hive table is converted to use Spark's `HadoopFsRelation` in `HiveMetastoreCatalog`, metadata for every partition of that table are retrieved from the metastore and loaded into driver memory. In addition, every partition's metadata files are read from the filesystem to perform schema inference.
If a user queries such a table with predicates which prune that table's partitions, we would like to be able to answer that query without consulting partition metadata which are not involved in the query. When querying a table with a large number of partitions for some data from a small number of partitions (maybe even a single partition), the current conversion strategy is highly inefficient. I suspect this scenario is not uncommon in the wild.
In addition to being inefficient in running time, the current strategy is inefficient in its use of driver memory. When the sum of the number of partitions of all tables loaded in a driver reaches a certain level (somewhere in the tens of thousands), their cached data exhaust all driver heap memory in the default configuration. I suspect this scenario is less common (in that not too many deployments work with tables with tens of thousands of partitions), however this does illustrate how large the memory footprint of this metadata can be. With tables with hundreds or thousands of partitions, I would expect the `HiveMetastoreCatalog` table cache to represent a significant portion of the driver's heap space.
This PR proposes an alternative approach. Basically, it makes four changes:
1. It adds a new method, `listPartitionsByFilter` to the Catalyst `ExternalCatalog` trait which returns the partition metadata for a given sequence of partition pruning predicates.
1. It refactors the `FileCatalog` type hierarchy to include a new `TableFileCatalog` to efficiently return files only for partitions matching a sequence of partition pruning predicates.
1. It removes partition loading and caching from `HiveMetastoreCatalog`.
1. It adds a new Catalyst optimizer rule, `PruneFileSourcePartitions`, which applies a plan's partition-pruning predicates to prune out unnecessary partition files from a `HadoopFsRelation`'s underlying file catalog.
The net effect is that when a query over a partitioned Hive table is planned, the analyzer retrieves the table metadata from `HiveMetastoreCatalog`. As part of this operation, the `HiveMetastoreCatalog` builds a `HadoopFsRelation` with a `TableFileCatalog`. It does not load any partition metadata or scan any files. The optimizer prunes-away unnecessary table partitions by sending the partition-pruning predicates to the relation's `TableFileCatalog `. The `TableFileCatalog` in turn calls the `listPartitionsByFilter` method on its external catalog. This queries the Hive metastore, passing along those filters.
As a bonus, performing partition pruning during optimization leads to a more accurate relation size estimate. This, along with c481bdf, can lead to automatic, safe application of the broadcast optimization in a join where it might previously have been omitted.
## Open Issues
1. This PR omits partition metadata caching. I can add this once the overall strategy for the cold path is established, perhaps in a future PR.
1. This PR removes and omits partitioned Hive table schema reconciliation. As a result, it fails to find Parquet schema columns with upper case letters because of the Hive metastore's case-insensitivity. This issue may be fixed by #14750, but that PR appears to have stalled. ericl has contributed to this PR a workaround for Parquet wherein schema reconciliation occurs at query execution time instead of planning. Whether ORC requires a similar patch is an open issue.
1. This PR omits an implementation of `listPartitionsByFilter` for the `InMemoryCatalog`.
1. This PR breaks parquet log output redirection during query execution. I can work around this by running `Class.forName("org.apache.spark.sql.execution.datasources.parquet.ParquetFileFormat$")` first thing in a Spark shell session, but I haven't figured out how to fix this properly.
## How was this patch tested?
The current Spark unit tests were run, and some ad-hoc tests were performed to validate that only the necessary partition metadata is loaded.
Author: Michael Allman <michael@videoamp.com>
Author: Eric Liang <ekl@databricks.com>
Author: Eric Liang <ekhliang@gmail.com>
Closes#14690 from mallman/spark-16980-lazy_partition_fetching.
## What changes were proposed in this pull request?
Add a crossJoin function to the DataFrame API similar to that in Scala. Joins with no condition (cartesian products) must be specified with the crossJoin API
## How was this patch tested?
Added python tests to ensure that an AnalysisException if a cartesian product is specified without crossJoin(), and that cartesian products can execute if specified via crossJoin()
(Please explain how this patch was tested. E.g. unit tests, integration tests, manual tests)
(If this patch involves UI changes, please attach a screenshot; otherwise, remove this)
Please review https://cwiki.apache.org/confluence/display/SPARK/Contributing+to+Spark before opening a pull request.
Author: Srinath Shankar <srinath@databricks.com>
Closes#15493 from srinathshankar/crosspython.
## What changes were proposed in this pull request?
This patch graduates a list of Spark SQL APIs and mark them stable.
The following are marked stable:
Dataset/DataFrame
- functions, since 1.3
- ColumnName, since 1.3
- DataFrameNaFunctions, since 1.3.1
- DataFrameStatFunctions, since 1.4
- UserDefinedFunction, since 1.3
- UserDefinedAggregateFunction, since 1.5
- Window and WindowSpec, since 1.4
Data sources:
- DataSourceRegister, since 1.5
- RelationProvider, since 1.3
- SchemaRelationProvider, since 1.3
- CreatableRelationProvider, since 1.3
- BaseRelation, since 1.3
- TableScan, since 1.3
- PrunedScan, since 1.3
- PrunedFilteredScan, since 1.3
- InsertableRelation, since 1.3
The following are kept experimental / evolving:
Data sources:
- CatalystScan (tied to internal logical plans so it is not stable by definition)
Structured streaming:
- all classes (introduced new in 2.0 and will likely change)
Dataset typed operations (introduced in 1.6 and 2.0 and might change, although probability is low)
- all typed methods on Dataset
- KeyValueGroupedDataset
- o.a.s.sql.expressions.javalang.typed
- o.a.s.sql.expressions.scalalang.typed
- methods that return typed Dataset in SparkSession
We should discuss more whether we want to mark Dataset typed operations stable in 2.1.
## How was this patch tested?
N/A - just annotation changes.
Author: Reynold Xin <rxin@databricks.com>
Closes#15469 from rxin/SPARK-17900.
Currently pyspark can only call the builtin java UDF, but can not call custom java UDF. It would be better to allow that. 2 benefits:
* Leverage the power of rich third party java library
* Improve the performance. Because if we use python UDF, python daemons will be started on worker which will affect the performance.
Author: Jeff Zhang <zjffdu@apache.org>
Closes#9766 from zjffdu/SPARK-11775.
[SPARK-11905](https://issues.apache.org/jira/browse/SPARK-11905) added support for `persist`/`cache` for `Dataset`. However, there is no user-facing API to check if a `Dataset` is cached and if so what the storage level is. This PR adds `getStorageLevel` to `Dataset`, analogous to `RDD.getStorageLevel`.
Updated `DatasetCacheSuite`.
Author: Nick Pentreath <nickp@za.ibm.com>
Closes#13780 from MLnick/ds-storagelevel.
Signed-off-by: Michael Armbrust <michael@databricks.com>
## What changes were proposed in this pull request?
We are trying to resolve the attribute in sort by pulling up some column for grandchild into child, but that's wrong when the child is Distinct, because the added column will change the behavior of Distinct, we should not do that.
## How was this patch tested?
Added regression test.
Author: Davies Liu <davies@databricks.com>
Closes#15489 from davies/order_distinct.
## What changes were proposed in this pull request?
Minor typo fix
## How was this patch tested?
Existing unit tests on Jenkins
Author: Andrew Ash <andrew@andrewash.com>
Closes#15486 from ash211/patch-8.
## What changes were proposed in this pull request?
This pr adds some test cases for statistics: case sensitive column names, non ascii column names, refresh table, and also improves some documentation.
## How was this patch tested?
add test cases
Author: wangzhenhua <wangzhenhua@huawei.com>
Closes#15360 from wzhfy/colStats2.
## What changes were proposed in this pull request?
`HiveExternalCatalog` should be the only interface to talk to the hive metastore. In `MetastoreRelation` we can just use `ExternalCatalog` instead of `HiveClient` to interact with hive metastore, and add missing API in `ExternalCatalog`.
## How was this patch tested?
existing tests.
Author: Wenchen Fan <wenchen@databricks.com>
Closes#15460 from cloud-fan/relation.
## What changes were proposed in this pull request?
This patch does a few changes to the file structure of data sources:
- Break fileSourceInterfaces.scala into multiple pieces (HadoopFsRelation, FileFormat, OutputWriter)
- Move ParquetOutputWriter into its own file
I created this as a separate patch so it'd be easier to review my future PRs that focus on refactoring this internal logic. This patch only moves code around, and has no logic changes.
## How was this patch tested?
N/A - should be covered by existing tests.
Author: Reynold Xin <rxin@databricks.com>
Closes#15473 from rxin/SPARK-17925.
## What changes were proposed in this pull request?
speculationEnabled and DATASOURCE_OUTPUTPATH seem like just dead code.
## How was this patch tested?
Tests should fail if they are not dead code.
Author: Reynold Xin <rxin@databricks.com>
Closes#15477 from rxin/SPARK-17927.
## What changes were proposed in this pull request?
Value classes were unsupported because catalyst data types were
obtained through reflection on erased types, which would resolve to a
value class' wrapped type and hence lead to unavailable methods during
code generation.
E.g. the following class
```scala
case class Foo(x: Int) extends AnyVal
```
would be seen as an `int` in catalyst and will cause instance cast failures when generated java code tries to treat it as a `Foo`.
This patch simply removes the erasure step when getting data types for
catalyst.
## How was this patch tested?
Additional tests in `ExpressionEncoderSuite`.
Author: Jakob Odersky <jakob@odersky.com>
Closes#15284 from jodersky/value-classes.
## What changes were proposed in this pull request?
There are 4 listLeafFiles-related functions in Spark:
- ListingFileCatalog.listLeafFiles (which calls HadoopFsRelation.listLeafFilesInParallel if the number of paths passed in is greater than a threshold; if it is lower, then it has its own serial version implemented)
- HadoopFsRelation.listLeafFiles (called only by HadoopFsRelation.listLeafFilesInParallel)
- HadoopFsRelation.listLeafFilesInParallel (called only by ListingFileCatalog.listLeafFiles)
It is actually very confusing and error prone because there are effectively two distinct implementations for the serial version of listing leaf files. As an example, SPARK-17599 updated only one of the code path and ignored the other one.
This code can be improved by:
- Move all file listing code into ListingFileCatalog, since it is the only class that needs this.
- Keep only one function for listing files in serial.
## How was this patch tested?
This change should be covered by existing unit and integration tests. I also moved a test case for HadoopFsRelation.shouldFilterOut from HadoopFsRelationSuite to ListingFileCatalogSuite.
Author: petermaxlee <petermaxlee@gmail.com>
Closes#15235 from petermaxlee/SPARK-17661.
## What changes were proposed in this pull request?
Metrics are needed for monitoring structured streaming apps. Here is the design doc for implementing the necessary metrics.
https://docs.google.com/document/d/1NIdcGuR1B3WIe8t7VxLrt58TJB4DtipWEbj5I_mzJys/edit?usp=sharing
Specifically, this PR adds the following public APIs changes.
### New APIs
- `StreamingQuery.status` returns a `StreamingQueryStatus` object (renamed from `StreamingQueryInfo`, see later)
- `StreamingQueryStatus` has the following important fields
- inputRate - Current rate (rows/sec) at which data is being generated by all the sources
- processingRate - Current rate (rows/sec) at which the query is processing data from
all the sources
- ~~outputRate~~ - *Does not work with wholestage codegen*
- latency - Current average latency between the data being available in source and the sink writing the corresponding output
- sourceStatuses: Array[SourceStatus] - Current statuses of the sources
- sinkStatus: SinkStatus - Current status of the sink
- triggerStatus - Low-level detailed status of the last completed/currently active trigger
- latencies - getOffset, getBatch, full trigger, wal writes
- timestamps - trigger start, finish, after getOffset, after getBatch
- numRows - input, output, state total/updated rows for aggregations
- `SourceStatus` has the following important fields
- inputRate - Current rate (rows/sec) at which data is being generated by the source
- processingRate - Current rate (rows/sec) at which the query is processing data from the source
- triggerStatus - Low-level detailed status of the last completed/currently active trigger
- Python API for `StreamingQuery.status()`
### Breaking changes to existing APIs
**Existing direct public facing APIs**
- Deprecated direct public-facing APIs `StreamingQuery.sourceStatuses` and `StreamingQuery.sinkStatus` in favour of `StreamingQuery.status.sourceStatuses/sinkStatus`.
- Branch 2.0 should have it deprecated, master should have it removed.
**Existing advanced listener APIs**
- `StreamingQueryInfo` renamed to `StreamingQueryStatus` for consistency with `SourceStatus`, `SinkStatus`
- Earlier StreamingQueryInfo was used only in the advanced listener API, but now it is used in direct public-facing API (StreamingQuery.status)
- Field `queryInfo` in listener events `QueryStarted`, `QueryProgress`, `QueryTerminated` changed have name `queryStatus` and return type `StreamingQueryStatus`.
- Field `offsetDesc` in `SourceStatus` was Option[String], converted it to `String`.
- For `SourceStatus` and `SinkStatus` made constructor private instead of private[sql] to make them more java-safe. Instead added `private[sql] object SourceStatus/SinkStatus.apply()` which are harder to accidentally use in Java.
## How was this patch tested?
Old and new unit tests.
- Rate calculation and other internal logic of StreamMetrics tested by StreamMetricsSuite.
- New info in statuses returned through StreamingQueryListener is tested in StreamingQueryListenerSuite.
- New and old info returned through StreamingQuery.status is tested in StreamingQuerySuite.
- Source-specific tests for making sure input rows are counted are is source-specific test suites.
- Additional tests to test minor additions in LocalTableScanExec, StateStore, etc.
Metrics also manually tested using Ganglia sink
Author: Tathagata Das <tathagata.das1565@gmail.com>
Closes#15307 from tdas/SPARK-17731.
## What changes were proposed in this pull request?
correct the expected type from Length function to be Int
## How was this patch tested?
Test runs on little endian and big endian platforms
Author: Pete Robbins <robbinspg@gmail.com>
Closes#15464 from robbinspg/SPARK-17827.
## What changes were proposed in this pull request?
This patch annotates all the remaining APIs in SQL (excluding streaming) with InterfaceStability.
## How was this patch tested?
N/A - just annotation change.
Author: Reynold Xin <rxin@databricks.com>
Closes#15457 from rxin/SPARK-17830-2.
### What changes were proposed in this pull request?
Hive allows users to change the table type from `Managed` to `External` or from `External` to `Managed` by altering table's property `EXTERNAL`. See the JIRA: https://issues.apache.org/jira/browse/HIVE-1329
So far, Spark SQL does not correctly support it, although users can do it. Many assumptions are broken in the implementation. Thus, this PR is to disallow users to change it.
In addition, we also do not allow users to set the property `EXTERNAL` when creating a table.
### How was this patch tested?
Added test cases
Author: gatorsmile <gatorsmile@gmail.com>
Closes#15230 from gatorsmile/alterTableSetExternal.
## What changes were proposed in this pull request?
Currently `HiveExternalCatalog` will filter out the Spark SQL internal table properties, e.g. `spark.sql.sources.provider`, `spark.sql.sources.schema`, etc. This is reasonable for external users as they don't want to see these internal properties in `DESC TABLE`.
However, as a Spark developer, sometimes we do wanna see the raw table properties. This PR adds a new internal SQL conf, `spark.sql.debug`, to enable debug mode and keep these raw table properties.
This config can also be used in similar places where we wanna retain debug information in the future.
## How was this patch tested?
new test in MetastoreDataSourcesSuite
Author: Wenchen Fan <wenchen@databricks.com>
Closes#15458 from cloud-fan/debug.
## What changes were proposed in this pull request?
minor doc fix for "getAnyValAs" in class Row
## How was this patch tested?
None.
(If this patch involves UI changes, please attach a screenshot; otherwise, remove this)
Author: buzhihuojie <ren.weiluo@gmail.com>
Closes#15452 from david-weiluo-ren/minorDocFixForRow.
## What changes were proposed in this pull request?
Two issues regarding Dataset.dropduplicates:
1. Dataset.dropDuplicates should consider the columns with same column name
We find and get the first resolved attribute from output with the given column name in `Dataset.dropDuplicates`. When we have the more than one columns with the same name. Other columns are put into aggregation columns, instead of grouping columns.
2. Dataset.dropDuplicates should not change the output of child plan
We create new `Alias` with new exprId in `Dataset.dropDuplicates` now. However it causes problem when we want to select the columns as follows:
val ds = Seq(("a", 1), ("a", 2), ("b", 1), ("a", 1)).toDS()
// ds("_2") will cause analysis exception
ds.dropDuplicates("_1").select(ds("_1").as[String], ds("_2").as[Int])
Because the two issues are both related to `Dataset.dropduplicates` and the code changes are not big, so submitting them together as one PR.
## How was this patch tested?
Jenkins tests.
Author: Liang-Chi Hsieh <viirya@gmail.com>
Closes#15427 from viirya/fix-dropduplicates.
## What changes were proposed in this pull request?
The CompactibleFileStreamLog materializes the whole metadata log in memory as a String. This can cause issues when there are lots of files that are being committed, especially during a compaction batch.
You may come across stacktraces that look like:
```
java.lang.OutOfMemoryError: Requested array size exceeds VM limit
at java.lang.StringCoding.encode(StringCoding.java:350)
at java.lang.String.getBytes(String.java:941)
at org.apache.spark.sql.execution.streaming.FileStreamSinkLog.serialize(FileStreamSinkLog.scala:127)
```
The safer way is to write to an output stream so that we don't have to materialize a huge string.
## How was this patch tested?
Existing unit tests
Author: Burak Yavuz <brkyvz@gmail.com>
Closes#15437 from brkyvz/ser-to-stream.
## What changes were proposed in this pull request?
This patch improves the window function frame boundary API to make it more obvious to read and to use. The two high level changes are:
1. Create Window.currentRow, Window.unboundedPreceding, Window.unboundedFollowing to indicate the special values in frame boundaries. These methods map to the special integral values so we are not breaking backward compatibility here. This change makes the frame boundaries more self-evident (instead of Long.MinValue, it becomes Window.unboundedPreceding).
2. In Python, for any value less than or equal to JVM's Long.MinValue, treat it as Window.unboundedPreceding. For any value larger than or equal to JVM's Long.MaxValue, treat it as Window.unboundedFollowing. Before this change, if the user specifies any value that is less than Long.MinValue but not -sys.maxsize (e.g. -sys.maxsize + 1), the number we pass over to the JVM would overflow, resulting in a frame that does not make sense.
Code example required to specify a frame before this patch:
```
Window.rowsBetween(-Long.MinValue, 0)
```
While the above code should still work, the new way is more obvious to read:
```
Window.rowsBetween(Window.unboundedPreceding, Window.currentRow)
```
## How was this patch tested?
- Updated DataFrameWindowSuite (for Scala/Java)
- Updated test_window_functions_cumulative_sum (for Python)
- Renamed DataFrameWindowSuite DataFrameWindowFunctionsSuite to better reflect its purpose
Author: Reynold Xin <rxin@databricks.com>
Closes#15438 from rxin/SPARK-17845.
## What changes were proposed in this pull request?
This is a step along the way to SPARK-8425.
To enable incremental review, the first step proposed here is to expand the blacklisting within tasksets. In particular, this will enable blacklisting for
* (task, executor) pairs (this already exists via an undocumented config)
* (task, node)
* (taskset, executor)
* (taskset, node)
Adding (task, node) is critical to making spark fault-tolerant of one-bad disk in a cluster, without requiring careful tuning of "spark.task.maxFailures". The other additions are also important to avoid many misleading task failures and long scheduling delays when there is one bad node on a large cluster.
Note that some of the code changes here aren't really required for just this -- they put pieces in place for SPARK-8425 even though they are not used yet (eg. the `BlacklistTracker` helper is a little out of place, `TaskSetBlacklist` holds onto a little more info than it needs to for just this change, and `ExecutorFailuresInTaskSet` is more complex than it needs to be).
## How was this patch tested?
Added unit tests, run tests via jenkins.
Author: Imran Rashid <irashid@cloudera.com>
Author: mwws <wei.mao@intel.com>
Closes#15249 from squito/taskset_blacklist_only.
## What changes were proposed in this pull request?
Add a flag to ignore corrupt files. For Spark core, the configuration is `spark.files.ignoreCorruptFiles`. For Spark SQL, it's `spark.sql.files.ignoreCorruptFiles`.
## How was this patch tested?
The added unit tests
Author: Shixiong Zhu <shixiong@databricks.com>
Closes#15422 from zsxwing/SPARK-17850.
## What changes were proposed in this pull request?
This change adds a check in castToInterval method of Cast expression , such that if converted value is null , then isNull variable should be set to true.
Earlier, the expression Cast(Literal(), CalendarIntervalType) was throwing NullPointerException because of the above mentioned reason.
## How was this patch tested?
Added test case in CastSuite.scala
jira entry for detail: https://issues.apache.org/jira/browse/SPARK-17884
Author: prigarg <prigarg@adobe.com>
Closes#15449 from priyankagargnitk/SPARK-17884.
## What changes were proposed in this pull request?
SQLConf is session-scoped and mutable. However, we do have the requirement for a static SQL conf, which is global and immutable, e.g. the `schemaStringThreshold` in `HiveExternalCatalog`, the flag to enable/disable hive support, the global temp view database in https://github.com/apache/spark/pull/14897.
Actually we've already implemented static SQL conf implicitly via `SparkConf`, this PR just make it explicit and expose it to users, so that they can see the config value via SQL command or `SparkSession.conf`, and forbid users to set/unset static SQL conf.
## How was this patch tested?
new tests in SQLConfSuite
Author: Wenchen Fan <wenchen@databricks.com>
Closes#15295 from cloud-fan/global-conf.
## What changes were proposed in this pull request?
Currently `Canonicalize` object doesn't support `And` and `Or`. So we can compare canonicalized form of predicates consistently. We should add the support.
## How was this patch tested?
Jenkins tests.
Author: Liang-Chi Hsieh <viirya@gmail.com>
Closes#15388 from viirya/canonicalize-and-or.
## What changes were proposed in this pull request?
The data type API has not been changed since Spark 1.3.0, and is ready for graduation. This patch marks them as stable APIs using the new InterfaceStability annotation.
This patch also looks at the various files in the catalyst module (not the "package") and marks the remaining few classes appropriately as well.
## How was this patch tested?
This is an annotation change. No functional changes.
Author: Reynold Xin <rxin@databricks.com>
Closes#15426 from rxin/SPARK-17864.
## What changes were proposed in this pull request?
address post hoc review comments for https://github.com/apache/spark/pull/14897
## How was this patch tested?
N/A
Author: Wenchen Fan <wenchen@databricks.com>
Closes#15424 from cloud-fan/global-temp-view.
## What changes were proposed in this pull request?
When I was creating the example code for SPARK-10496, I realized it was pretty convoluted to define the frame boundaries for window functions when there is no partition column or ordering column. The reason is that we don't provide a way to create a WindowSpec directly with the frame boundaries. We can trivially improve this by adding rowsBetween and rangeBetween to Window object.
As an example, to compute cumulative sum using the natural ordering, before this pr:
```
df.select('key, sum("value").over(Window.partitionBy(lit(1)).rowsBetween(Long.MinValue, 0)))
```
After this pr:
```
df.select('key, sum("value").over(Window.rowsBetween(Long.MinValue, 0)))
```
Note that you could argue there is no point specifying a window frame without partitionBy/orderBy -- but it is strange that only rowsBetween and rangeBetween are not the only two APIs not available.
This also fixes https://issues.apache.org/jira/browse/SPARK-17656 (removing _root_.scala).
## How was this patch tested?
Added test cases to compute cumulative sum in DataFrameWindowSuite for Scala/Java and tests.py for Python.
Author: Reynold Xin <rxin@databricks.com>
Closes#15412 from rxin/SPARK-17844.
## What changes were proposed in this pull request?
This PR proposes to fix arbitrary usages among `Map[String, String]`, `Properties` and `JDBCOptions` instances for options in `execution/jdbc` package and make the connection properties exclude Spark-only options.
This PR includes some changes as below:
- Unify `Map[String, String]`, `Properties` and `JDBCOptions` in `execution/jdbc` package to `JDBCOptions`.
- Move `batchsize`, `fetchszie`, `driver` and `isolationlevel` options into `JDBCOptions` instance.
- Document `batchSize` and `isolationlevel` with marking both read-only options and write-only options. Also, this includes minor types and detailed explanation for some statements such as url.
- Throw exceptions fast by checking arguments first rather than in execution time (e.g. for `fetchsize`).
- Exclude Spark-only options in connection properties.
## How was this patch tested?
Existing tests should cover this.
Author: hyukjinkwon <gurwls223@gmail.com>
Closes#15292 from HyukjinKwon/SPARK-17719.
## What changes were proposed in this pull request?
Currently, CSV datasource allows to load duplicated empty string fields or fields having `nullValue` in the header. It'd be great if this can deal with normal fields as well.
This PR proposes handling the duplicates consistently with the existing behaviour with considering case-sensitivity (`spark.sql.caseSensitive`) as below:
data below:
```
fieldA,fieldB,,FIELDA,fielda,,
1,2,3,4,5,6,7
```
is parsed as below:
```scala
spark.read.format("csv").option("header", "true").load("test.csv").show()
```
- when `spark.sql.caseSensitive` is `false` (by default).
```
+-------+------+---+-------+-------+---+---+
|fieldA0|fieldB|_c2|FIELDA3|fieldA4|_c5|_c6|
+-------+------+---+-------+-------+---+---+
| 1| 2| 3| 4| 5| 6| 7|
+-------+------+---+-------+-------+---+---+
```
- when `spark.sql.caseSensitive` is `true`.
```
+-------+------+---+-------+-------+---+---+
|fieldA0|fieldB|_c2| FIELDA|fieldA4|_c5|_c6|
+-------+------+---+-------+-------+---+---+
| 1| 2| 3| 4| 5| 6| 7|
+-------+------+---+-------+-------+---+---+
```
**In more details**,
There is a good reference about this problem, `read.csv()` in R. So, I initially wanted to propose the similar behaviour.
In case of R, the CSV data below:
```
fieldA,fieldB,,fieldA,fieldA,,
1,2,3,4,5,6,7
```
is parsed as below:
```r
test <- read.csv(file="test.csv",header=TRUE,sep=",")
> test
fieldA fieldB X fieldA.1 fieldA.2 X.1 X.2
1 1 2 3 4 5 6 7
```
However, Spark CSV datasource already is handling duplicated empty strings and `nullValue` as field names. So the data below:
```
,,,fieldA,,fieldB,
1,2,3,4,5,6,7
```
is parsed as below:
```scala
spark.read.format("csv").option("header", "true").load("test.csv").show()
```
```
+---+---+---+------+---+------+---+
|_c0|_c1|_c2|fieldA|_c4|fieldB|_c6|
+---+---+---+------+---+------+---+
| 1| 2| 3| 4| 5| 6| 7|
+---+---+---+------+---+------+---+
```
R starts the number for each duplicate but Spark adds the number for its position for all fields for `nullValue` and empty strings.
In terms of case-sensitivity, it seems R is case-sensitive as below: (it seems it is not configurable).
```
a,a,a,A,A
1,2,3,4,5
```
is parsed as below:
```r
test <- read.csv(file="test.csv",header=TRUE,sep=",")
> test
a a.1 a.2 A A.1
1 1 2 3 4 5
```
## How was this patch tested?
Unit test in `CSVSuite`.
Author: hyukjinkwon <gurwls223@gmail.com>
Closes#14745 from HyukjinKwon/SPARK-16896.
## What changes were proposed in this pull request?
The default buffer size is not big enough for randomly generated MapType.
## How was this patch tested?
Ran the tests in 100 times, it never fail (it fail 8 times before the patch).
Author: Davies Liu <davies@databricks.com>
Closes#15395 from davies/flaky_map.
## What changes were proposed in this pull request?
This patch annotates the InterfaceStability level for top level classes in o.a.spark.sql and o.a.spark.sql.util packages, to experiment with this new annotation.
## How was this patch tested?
N/A
Author: Reynold Xin <rxin@databricks.com>
Closes#15392 from rxin/SPARK-17830.
## What changes were proposed in this pull request?
The function `SparkSqlParserSuite.createTempViewUsing` is not used for now and causes build failure, this PR simply removes it.
## How was this patch tested?
N/A
Author: jiangxingbo <jiangxb1987@gmail.com>
Closes#15418 from jiangxb1987/parserSuite.
