SPARK-3276 Added a new configuration parameter ``spark.streaming.minRememberDuration``, with a default value of 1 minute.
So that when a Spark Streaming application is started, an arbitrary number of minutes can be taken as threshold for remembering.
Author: emres <emre.sevinc@gmail.com>
Closes#5438 from emres/SPARK-3276 and squashes the following commits:
766f938 [emres] SPARK-3276 Switched to using newly added getTimeAsSeconds method.
affee1d [emres] SPARK-3276 Changed the property name and variable name for minRememberDuration
c9d58ca [emres] SPARK-3276 Minor code re-formatting.
1c53ba9 [emres] SPARK-3276 Started to use ssc.conf rather than ssc.sparkContext.getConf, and also getLong method directly.
bfe0acb [emres] SPARK-3276 Moved the minRememberDurationMin to the class
daccc82 [emres] SPARK-3276 Changed the property name to reflect the unit of value and reduced number of fields.
43cc1ce [emres] SPARK-3276 Added a new configuration parameter spark.streaming.minRemember duration, with a default value of 1 minute.
A simple truncation in integer division (on rates over 1000 messages / second) causes the existing implementation to sleep for 0 milliseconds, then call itself recursively; this causes what is essentially an infinite recursion, since the base case of the calculated amount of time having elapsed can't be reached before available stack space is exhausted. A fix to this truncation error is included in this patch.
However, even with the defect patched, the accuracy of the existing implementation is abysmal (the error bounds of the original test were effectively [-30%, +10%], although this fact was obscured by hard-coded error margins); as such, when the error bounds were tightened down to [-5%, +5%], the existing implementation failed to meet the new, tightened, requirements. Therefore, an industry-vetted solution (from Guava) was used to get the adapted tests to pass.
Author: David McGuire <david.mcguire2@nike.com>
Closes#5559 from dmcguire81/master and squashes the following commits:
d29d2e0 [David McGuire] Back out to +/-5% error margins, for flexibility in timing
8be6934 [David McGuire] Fix spacing per code review
90e98b9 [David McGuire] Address scalastyle errors
29011bd [David McGuire] Further ratchet down the error margins
b33b796 [David McGuire] Eliminate dependency on even distribution by BlockGenerator
8f2934b [David McGuire] Remove arbitrary thread timing / cooperation code
70ee310 [David McGuire] Use Thread.yield(), since Thread.sleep(0) is system-dependent
82ee46d [David McGuire] Replace guard clause with nested conditional
2794717 [David McGuire] Replace the RateLimiter with the Guava implementation
38f3ca8 [David McGuire] Ratchet down the error rate to +/- 5%; tests fail
24b1bc0 [David McGuire] Fix truncation in integer division causing infinite recursion
d6e1079 [David McGuire] Stack overflow error in RateLimiter on rates over 1000/s
Title says it all.
cc rxin tdas
Author: zsxwing <zsxwing@gmail.com>
Closes#5554 from zsxwing/SPARK-6979 and squashes the following commits:
5304350 [zsxwing] Fix NotSerializableException
e9d3479 [zsxwing] Add blank lines
633e279 [zsxwing] Fix NotSerializableException
e496ace [zsxwing] Replace JobGenerator.eventActor with EventLoop
ec6ec58 [zsxwing] Fix the import order
ce0fa73 [zsxwing] Replace JobScheduler.eventActor with EventLoop
A subtask of [SPARK-5293](https://issues.apache.org/jira/browse/SPARK-5293)
Author: zsxwing <zsxwing@gmail.com>
Closes#5557 from zsxwing/SPARK-6983 and squashes the following commits:
e777e9f [zsxwing] Update ReceiverTrackerActor to use the new Rpc interface
This PR adds two lists, `Active Batches` and `Completed Batches`. Here is the screenshot:
Due to [SPARK-6766](https://issues.apache.org/jira/browse/SPARK-6766), I need to merge #5414 in my local machine to get the above screenshot.
Author: zsxwing <zsxwing@gmail.com>
Closes#5434 from zsxwing/SPARK-6796 and squashes the following commits:
be50fc6 [zsxwing] Fix the code style
51b792e [zsxwing] Fix the unit test
6f3078e [zsxwing] Make 'startTime' readable
f40e0a9 [zsxwing] Merge branch 'master' into SPARK-6796
2525336 [zsxwing] Rename 'Processed batches' and 'Waiting batches' and also add links
a69c091 [zsxwing] Show the number of total completed batches too
a12ad7b [zsxwing] Change 'records' to 'events' in the UI
86b5e7f [zsxwing] Make BatchTableBase abstract
b248787 [zsxwing] Add tests to verify the new tables
d18ab7d [zsxwing] Fix the code style
6ceffb3 [zsxwing] Add "Active Batches" and "Completed Batches" lists to StreamingPage
I've added new utility methods to do the conversion from times specified as e.g. 120s, 240ms, 360us to convert to a consistent internal representation. I've updated usage of these constants throughout the code to be consistent.
I believe I've captured all usages of time-based properties throughout the code. I've also updated variable names in a number of places to reflect their units for clarity and updated documentation where appropriate.
Author: Ilya Ganelin <ilya.ganelin@capitalone.com>
Author: Ilya Ganelin <ilganeli@gmail.com>
Closes#5236 from ilganeli/SPARK-5931 and squashes the following commits:
4526c81 [Ilya Ganelin] Update configuration.md
de3bff9 [Ilya Ganelin] Fixing style errors
f5fafcd [Ilya Ganelin] Doc updates
951ca2d [Ilya Ganelin] Made the most recent round of changes
bc04e05 [Ilya Ganelin] Minor fixes and doc updates
25d3f52 [Ilya Ganelin] Minor nit fixes
642a06d [Ilya Ganelin] Fixed logic for invalid suffixes and addid matching test
8927e66 [Ilya Ganelin] Fixed handling of -1
69fedcc [Ilya Ganelin] Added test for zero
dc7bd08 [Ilya Ganelin] Fixed error in exception handling
7d19cdd [Ilya Ganelin] Added fix for possible NPE
6f651a8 [Ilya Ganelin] Now using regexes to simplify code in parseTimeString. Introduces getTimeAsSec and getTimeAsMs methods in SparkConf. Updated documentation
cbd2ca6 [Ilya Ganelin] Formatting error
1a1122c [Ilya Ganelin] Formatting fixes and added m for use as minute formatter
4e48679 [Ilya Ganelin] Fixed priority order and mixed up conversions in a couple spots
d4efd26 [Ilya Ganelin] Added time conversion for yarn.scheduler.heartbeat.interval-ms
cbf41db [Ilya Ganelin] Got rid of thrown exceptions
1465390 [Ilya Ganelin] Nit
28187bf [Ilya Ganelin] Convert straight to seconds
ff40bfe [Ilya Ganelin] Updated tests to fix small bugs
19c31af [Ilya Ganelin] Added cleaner computation of time conversions in tests
6387772 [Ilya Ganelin] Updated suffix handling to handle overlap of units more gracefully
5193d5f [Ilya Ganelin] Resolved merge conflicts
76cfa27 [Ilya Ganelin] [SPARK-5931] Minor nit fixes'
bf779b0 [Ilya Ganelin] Special handling of overlapping usffixes for java
dd0a680 [Ilya Ganelin] Updated scala code to call into java
b2fc965 [Ilya Ganelin] replaced get or default since it's not present in this version of java
39164f9 [Ilya Ganelin] [SPARK-5931] Updated Java conversion to be similar to scala conversion. Updated conversions to clean up code a little using TimeUnit.convert. Added Unit tests
3b126e1 [Ilya Ganelin] Fixed conversion to US from seconds
1858197 [Ilya Ganelin] Fixed bug where all time was being converted to us instead of the appropriate units
bac9edf [Ilya Ganelin] More whitespace
8613631 [Ilya Ganelin] Whitespace
1c0c07c [Ilya Ganelin] Updated Java code to add day, minutes, and hours
647b5ac [Ilya Ganelin] Udpated time conversion to use map iterator instead of if fall through
70ac213 [Ilya Ganelin] Fixed remaining usages to be consistent. Updated Java-side time conversion
68f4e93 [Ilya Ganelin] Updated more files to clean up usage of default time strings
3a12dd8 [Ilya Ganelin] Updated host revceiver
5232a36 [Ilya Ganelin] [SPARK-5931] Changed default behavior of time string conversion.
499bdf0 [Ilya Ganelin] Merge branch 'SPARK-5931' of github.com:ilganeli/spark into SPARK-5931
9e2547c [Ilya Ganelin] Reverting doc changes
8f741e1 [Ilya Ganelin] Update JavaUtils.java
34f87c2 [Ilya Ganelin] Update Utils.scala
9a29d8d [Ilya Ganelin] Fixed misuse of time in streaming context test
42477aa [Ilya Ganelin] Updated configuration doc with note on specifying time properties
cde9bff [Ilya Ganelin] Updated spark.streaming.blockInterval
c6a0095 [Ilya Ganelin] Updated spark.core.connection.auth.wait.timeout
5181597 [Ilya Ganelin] Updated spark.dynamicAllocation.schedulerBacklogTimeout
2fcc91c [Ilya Ganelin] Updated spark.dynamicAllocation.executorIdleTimeout
6d1518e [Ilya Ganelin] Upated spark.speculation.interval
3f1cfc8 [Ilya Ganelin] Updated spark.scheduler.revive.interval
3352d34 [Ilya Ganelin] Updated spark.scheduler.maxRegisteredResourcesWaitingTime
272c215 [Ilya Ganelin] Updated spark.locality.wait
7320c87 [Ilya Ganelin] updated spark.akka.heartbeat.interval
064ebd6 [Ilya Ganelin] Updated usage of spark.cleaner.ttl
21ef3dd [Ilya Ganelin] updated spark.shuffle.sasl.timeout
c9f5cad [Ilya Ganelin] Updated spark.shuffle.io.retryWait
4933fda [Ilya Ganelin] Updated usage of spark.storage.blockManagerSlaveTimeout
7db6d2a [Ilya Ganelin] Updated usage of spark.akka.timeout
404f8c3 [Ilya Ganelin] Updated usage of spark.core.connection.ack.wait.timeout
59bf9e1 [Ilya Ganelin] [SPARK-5931] Updated Utils and JavaUtils classes to add helper methods to handle time strings. Updated time strings in a few places to properly parse time
Because `StreamingPage.render` doesn't hold the `listener` lock when generating the content, the different parts of content may have some inconsistent values if `listener` updates its status at the same time. And it will confuse people.
This PR added `listener.synchronized` to make sure we have a consistent view of StreamingJobProgressListener when creating the content.
Author: zsxwing <zsxwing@gmail.com>
Closes#5470 from zsxwing/SPARK-6860 and squashes the following commits:
cec6f92 [zsxwing] Add missing 'synchronized' in StreamingJobProgressListener
7182498 [zsxwing] Add synchronized to make sure we have a consistent view of StreamingJobProgressListener when creating the content
The close action should be placed within finally block to avoid the potential resource leaks
Author: lisurprise <zhichao.li@intel.com>
Closes#5407 from zhichao-li/master and squashes the following commits:
065999f [lisurprise] add guard for null
ef862d6 [lisurprise] remove fs.close
a754adc [lisurprise] refactor with tryWithSafeFinally
824adb3 [lisurprise] close before validation
c877da7 [lisurprise] Fix potential resource leaks
This PR includes:
1. Send `StreamingListenerBatchSubmitted` when `JobSet` is submitted
1. Fix `StreamingListenerBatchStarted.batchInfo.processingStartTime`
1. Fix a type: `completedaBatchInfos` -> `completedBatchInfos`
Author: zsxwing <zsxwing@gmail.com>
Closes#5414 from zsxwing/SPARK-6766 and squashes the following commits:
2f85060 [zsxwing] Update tests
ca0955b [zsxwing] Combine unit tests
79b4fed [zsxwing] Add StreamingJobProgressListenerSuite to test StreamingJobProgressListener
fc3a2a1 [zsxwing] Add unit tests for SPARK-6766
74aed99 [zsxwing] Refactor as per TD's suggestion
493f978 [zsxwing] Send StreamingListenerBatchSubmitted when JobSet is submitted; fix StreamingListenerBatchStarted.batchInfo.processingStartTime; fix a typo
https://issues.apache.org/jira/browse/SPARK-6758
I am not sure if it is ok to block them in test resources too (as we shade jetty in assembly?).
Author: WangTaoTheTonic <wangtao111@huawei.com>
Closes#5406 from WangTaoTheTonic/SPARK-6758 and squashes the following commits:
e09605b [WangTaoTheTonic] block the right jetty package
So we can turn style checker on for test code.
Author: Reynold Xin <rxin@databricks.com>
Closes#5409 from rxin/test-style-streaming and squashes the following commits:
7aea69b [Reynold Xin] [SPARK-6765] Fix test code style for streaming.
This PR replaced the following `Actor`s to `RpcEndpoint`:
1. HeartbeatReceiver
1. ExecutorActor
1. BlockManagerMasterActor
1. BlockManagerSlaveActor
1. CoarseGrainedExecutorBackend and subclasses
1. CoarseGrainedSchedulerBackend.DriverActor
This is the first PR. I will split the work of SPARK-6602 to several PRs for code review.
Author: zsxwing <zsxwing@gmail.com>
Closes#5268 from zsxwing/rpc-rewrite and squashes the following commits:
287e9f8 [zsxwing] Fix the code style
26c56b7 [zsxwing] Merge branch 'master' into rpc-rewrite
9cc825a [zsxwing] Rmove setupThreadSafeEndpoint and add ThreadSafeRpcEndpoint
30a9036 [zsxwing] Make self return null after stopping RpcEndpointRef; fix docs and error messages
705245d [zsxwing] Fix some bugs after rebasing the changes on the master
003cf80 [zsxwing] Update CoarseGrainedExecutorBackend and CoarseGrainedSchedulerBackend to use RpcEndpoint
7d0e6dc [zsxwing] Update BlockManagerSlaveActor to use RpcEndpoint
f5d6543 [zsxwing] Update BlockManagerMaster to use RpcEndpoint
30e3f9f [zsxwing] Update ExecutorActor to use RpcEndpoint
478b443 [zsxwing] Update HeartbeatReceiver to use RpcEndpoint
This builds on my earlier pull requests and turns on the explicit type checking in scalastyle.
Author: Reynold Xin <rxin@databricks.com>
Closes#5342 from rxin/SPARK-6428 and squashes the following commits:
7b531ab [Reynold Xin] import ordering
2d9a8a5 [Reynold Xin] jl
e668b1c [Reynold Xin] override
9b9e119 [Reynold Xin] Parenthesis.
82e0cf5 [Reynold Xin] [SPARK-6428] Turn on explicit type checking for public methods.
1. Test JARs are built & published
1. log4j.resources is explicitly excluded. Without this, downstream test run logging depends on the order the JARs are listed/loaded
1. sql/hive pulls in spark-sql &...spark-catalyst for its test runs
1. The copied in test classes were rm'd, and a test edited to remove its now duplicate assert method
1. Spark streaming is now build with the same plugin/phase as the rest, but its shade plugin declaration is kept in (so different from the rest of the test plugins). Due to (#2), this means the test JAR no longer includes its log4j file.
Outstanding issues:
* should the JARs be shaded? `spark-streaming-test.jar` does, but given these are test jars for developers only, especially in the same spark source tree, it's hard to justify.
* `maven-jar-plugin` v 2.6 was explicitly selected; without this the apache-1.4 parent template JAR version (2.4) chosen.
* Are there any other resources to exclude?
Author: Steve Loughran <stevel@hortonworks.com>
Closes#5119 from steveloughran/stevel/patches/SPARK-6433-test-jars and squashes the following commits:
81ceb01 [Steve Loughran] SPARK-6433 add a clearer comment explaining what the plugin is doing & why
a6dca33 [Steve Loughran] SPARK-6433 : pull configuration section form archive plugin
c2b5f89 [Steve Loughran] SPARK-6433 omit "jar" goal from jar plugin
fdac51b [Steve Loughran] SPARK-6433 -002; indentation & delegate plugin version to parent
650f442 [Steve Loughran] SPARK-6433 patch 001: test JARs are built; sql/hive pulls in spark-sql & spark-catalyst for its test runs
Author: Reynold Xin <rxin@databricks.com>
Closes#5110 from rxin/streaming-explicit-type and squashes the following commits:
2c2db32 [Reynold Xin] [SPARK-6428][Streaming] Added explicit types for all public methods.
Use `Utils.createTempDir()` to replace other temp file mechanisms used in some tests, to further ensure they are cleaned up, and simplify
Author: Sean Owen <sowen@cloudera.com>
Closes#5029 from srowen/SPARK-6338 and squashes the following commits:
27b740a [Sean Owen] Fix hive-thriftserver tests that don't expect an existing dir
4a212fa [Sean Owen] Standardize a bit more temp dir management
9004081 [Sean Owen] Revert some added recursive-delete calls
57609e4 [Sean Owen] Use Utils.createTempDir() to replace other temp file mechanisms used in some tests, to further ensure they are cleaned up, and simplify
https://issues.apache.org/jira/browse/SPARK-4012
This patch is a resubmission for https://github.com/apache/spark/pull/2864
What I am proposing in this patch is that ***when the exception is thrown from an infinite loop, we should stop the SparkContext, instead of let JVM throws exception forever***
So, in the infinite loops where we originally wrapped with a ` logUncaughtExceptions`, I changed to `tryOrStopSparkContext`, so that the Spark component is stopped
Early stopped JVM process is helpful for HA scheme design, for example,
The user has a script checking the existence of the pid of the Spark Streaming driver for monitoring the availability; with the code before this patch, the JVM process is still available but not functional when the exceptions are thrown
andrewor14, srowen , mind taking further consideration about the change?
Author: CodingCat <zhunansjtu@gmail.com>
Closes#5004 from CodingCat/SPARK-4012-1 and squashes the following commits:
589276a [CodingCat] throw fatal error again
3c72cd8 [CodingCat] address the comments
6087864 [CodingCat] revise comments
6ad3eb0 [CodingCat] stop SparkContext instead of quit the JVM process
6322959 [CodingCat] exit JVM process when the exception is thrown from an infinite loop
This is another alternative approach to https://github.com/apache/spark/pull/4964/
I think this is a simpler fix that can be backported easily to other branches (1.2 and 1.3).
All it does it introduce a flag so that the pre-batch-start checkpoint does not call clear checkpoint.
There is not unit test yet. I will add it when this approach is commented upon. Not sure if this is testable easily.
Author: Tathagata Das <tathagata.das1565@gmail.com>
Closes#5008 from tdas/SPARK-6222 and squashes the following commits:
7315bc2 [Tathagata Das] Removed empty line.
c438de4 [Tathagata Das] Revert unnecessary change.
5e98374 [Tathagata Das] Added unit test
50cb60b [Tathagata Das] Fixed style issue
295ca5c [Tathagata Das] Fixing SPARK-6222
This PR addresses a Scala compiler bug ([SI-8905](https://issues.scala-lang.org/browse/SI-8905)) that was breaking some of the Spark Java APIs. In a nutshell, it seems that methods whose implementations are inherited from generic traits sometimes have their type parameters erased to Object. This was causing methods like `DoubleRDD.min()` to throw confusing NoSuchMethodErrors at runtime.
The fix implemented here is to introduce an intermediate layer of abstract classes and inherit from those instead of directly extends the `Java*Like` traits. This should not break binary compatibility.
I also improved the test coverage of the Java API, adding several new tests for methods that failed at runtime due to this bug.
Author: Josh Rosen <joshrosen@databricks.com>
Closes#5050 from JoshRosen/javardd-si-8905-fix and squashes the following commits:
2feb068 [Josh Rosen] Use intermediate abstract classes to work around SPARK-3266
d5f3e5d [Josh Rosen] Add failing regression tests for SPARK-3266
In streaming driver recovery, when the SparkConf is reconstructed based on the checkpointed configuration, it recovers the old master URL. This okay if the cluster on which the streaming application is relaunched is the same cluster as it was running before. But if that cluster changes, there is no way to inject the new master URL of the new cluster. As a result, the restarted app tries to connect to the non-existent old cluster and fails.
The solution is to check whether a master URL is set in the System properties (by Spark submit) before recreating the SparkConf. If a new master url is set in the properties, then use it as that is obviously the most relevant one. Otherwise load the old one (to maintain existing behavior).
Author: Tathagata Das <tathagata.das1565@gmail.com>
Closes#5024 from tdas/SPARK-6331 and squashes the following commits:
392fd44 [Tathagata Das] Fixed naming issue.
c7c0b99 [Tathagata Das] Addressed comments.
6a0857c [Tathagata Das] Updated testsuites.
222485d [Tathagata Das] Load new master URL if present when recovering streaming context from checkpoint
Currently we would create a new streaming tab for each streamingContext even if there's already one on the same sparkContext which would cause duplicate StreamingTab created and none of them is taking effect.
snapshot: https://www.dropbox.com/s/t4gd6hqyqo0nivz/bad%20multiple%20streamings.png?dl=0
How to reproduce:
1)
import org.apache.spark.SparkConf
import org.apache.spark.streaming.
{Seconds, StreamingContext}
import org.apache.spark.storage.StorageLevel
val ssc = new StreamingContext(sc, Seconds(1))
val lines = ssc.socketTextStream("localhost", 9999, StorageLevel.MEMORY_AND_DISK_SER)
val words = lines.flatMap(_.split(" "))
val wordCounts = words.map(x => (x, 1)).reduceByKey(_ + _)
wordCounts.print()
ssc.start()
.....
2)
ssc.stop(false)
val ssc = new StreamingContext(sc, Seconds(1))
val lines = ssc.socketTextStream("localhost", 9999, StorageLevel.MEMORY_AND_DISK_SER)
val words = lines.flatMap(_.split(" "))
val wordCounts = words.map(x => (x, 1)).reduceByKey(_ + _)
wordCounts.print()
ssc.start()
Author: lisurprise <zhichao.li@intel.com>
Closes#4828 from zhichao-li/master and squashes the following commits:
c329806 [lisurprise] add test for attaching/detaching streaming tab
51e6c7f [lisurprise] move detach method into StreamingTab
31a44fa [lisurprise] add unit test for attaching and detaching new tab
db25ed2 [lisurprise] clean code
8281bcb [lisurprise] clean code
193c542 [lisurprise] remove streaming tab while closing streaming context
Resolve javac, scalac warnings of various types -- deprecations, Scala lang, unchecked cast, etc.
Author: Sean Owen <sowen@cloudera.com>
Closes#4950 from srowen/SPARK-6225 and squashes the following commits:
3080972 [Sean Owen] Ordered imports: Java, Scala, 3rd party, Spark
c67985b [Sean Owen] Resolve javac, scalac warnings of various types -- deprecations, Scala lang, unchecked cast, etc.
Resolve sbt warnings:
```
[warn] spark/streaming/src/main/scala/org/apache/spark/streaming/util/WriteAheadLogManager.scala:155: postfix operator second should be enabled
[warn] by making the implicit value scala.language.postfixOps visible.
[warn] This can be achieved by adding the import clause 'import scala.language.postfixOps'
[warn] or by setting the compiler option -language:postfixOps.
[warn] See the Scala docs for value scala.language.postfixOps for a discussion
[warn] why the feature should be explicitly enabled.
[warn] Await.ready(f, 1 second)
[warn] ^
```
Author: GuoQiang Li <witgo@qq.com>
Closes#4908 from witgo/sbt_warnings and squashes the following commits:
0629af4 [GuoQiang Li] Resolve sbt warnings: postfix operator second should be enabled
Option 1 of 2: Convert spark-parent module name to spark-parent_2.10 / spark-parent_2.11
Author: Sean Owen <sowen@cloudera.com>
Closes#4912 from srowen/SPARK-6182.1 and squashes the following commits:
eff60de [Sean Owen] Convert spark-parent module name to spark-parent_2.10 / spark-parent_2.11
Author: Saisai Shao <saisai.shao@intel.com>
Closes#4722 from jerryshao/SPARK-5943 and squashes the following commits:
1b01233 [Saisai Shao] Update the test to use new API to reduce the warning
Another one from JoshRosen 's wish list. The first commit is much smaller and removes 2 of the 4 Clock classes. The second is much larger, necessary for consolidating the streaming one. I put together implementations in the way that seemed simplest. Almost all the change is standardizing class and method names.
Author: Sean Owen <sowen@cloudera.com>
Closes#4514 from srowen/SPARK-4682 and squashes the following commits:
5ed3a03 [Sean Owen] Javadoc Clock classes; make ManualClock private[spark]
169dd13 [Sean Owen] Add support for legacy org.apache.spark.streaming clock class names
277785a [Sean Owen] Reduce the net change in this patch by reversing some unnecessary syntax changes along the way
b5e53df [Sean Owen] FakeClock -> ManualClock; getTime() -> getTimeMillis()
160863a [Sean Owen] Consolidate Streaming Clock class into common util Clock
7c956b2 [Sean Owen] Consolidate Clocks except for Streaming Clock
Author: jerryshao <saisai.shao@intel.com>
Closes#4612 from jerryshao/SPARK-5826 and squashes the following commits:
7ec71db [jerryshao] Remove transient for conf statement
88d84e6 [jerryshao] Fix Configuration not serializable problem
Revise JavaPairDStream API declaration on saveAs Hadoop methods, to allow it to be called directly as intended.
CC tdas for review
Author: Sean Owen <sowen@cloudera.com>
Closes#4608 from srowen/SPARK-5795 and squashes the following commits:
36f1ead [Sean Owen] Add code that shows compile problem and fix
036bd27 [Sean Owen] Revise JavaPairDStream API declaration on saveAs Hadoop methods, to allow it to be called directly as intended.
The warning log looks incorrect. Just fix it.
Author: Liang-Chi Hsieh <viirya@gmail.com>
Closes#4360 from viirya/fixing_typo and squashes the following commits:
48fbe4f [Liang-Chi Hsieh] Fix incorrect warning log.
Added `awaitTerminationOrTimeout` to return if the waiting time elapsed:
* `true` if it's stopped.
* `false` if the waiting time elapsed before returning from the method.
* throw the reported error if it's thrown during the execution.
Also deprecated `awaitTermination(timeout: Long)`.
Author: zsxwing <zsxwing@gmail.com>
Closes#4171 from zsxwing/SPARK-5379 and squashes the following commits:
c9e660b [zsxwing] Add a unit test for awaitTerminationOrTimeout
8a89f92 [zsxwing] Add awaitTerminationOrTimeout to python
cdc820b [zsxwing] Add awaitTerminationOrTimeout
In Spark 1.2 we added a `binaryRecords` input method for loading flat binary data. This format is useful for numerical array data, e.g. in scientific computing applications. This PR adds support for the same format in Streaming applications, where it is similarly useful, especially for streaming time series or sensor data.
Summary of additions
- adding `binaryRecordsStream` to Spark Streaming
- exposing `binaryRecordsStream` in the new PySpark Streaming
- new unit tests in Scala and Python
This required adding an optional Hadoop configuration param to `fileStream` and `FileInputStream`, but was otherwise straightforward.
tdas davies
Author: freeman <the.freeman.lab@gmail.com>
Closes#3803 from freeman-lab/streaming-binary-records and squashes the following commits:
b676534 [freeman] Clarify note
5ff1b75 [freeman] Add note to java streaming context
eba925c [freeman] Simplify notes
c4237b8 [freeman] Add experimental tag
30eba67 [freeman] Add filter and newFilesOnly alongside conf
c2cfa6d [freeman] Expose new version of fileStream with conf in java
34d20ef [freeman] Add experimental tag
14bca9a [freeman] Add experimental tag
b85bffc [freeman] Formatting
47560f4 [freeman] Space formatting
9a3715a [freeman] Refactor to reflect changes to FileInputSuite
7373f73 [freeman] Add note and defensive assertion for byte length
3ceb684 [freeman] Merge remote-tracking branch 'upstream/master' into streaming-binary-records
317b6d1 [freeman] Make test inline
fcb915c [freeman] Formatting
becb344 [freeman] Formatting
d3e75b2 [freeman] Add tests in python
a4324a3 [freeman] Line length
029d49c [freeman] Formatting
1c739aa [freeman] Simpler default arg handling
94d90d0 [freeman] Spelling
2843e9d [freeman] Add params to docstring
8b70fbc [freeman] Reorganization
28bff9b [freeman] Fix missing arg
9398bcb [freeman] Expose optional hadoop configuration
23dd69f [freeman] Tests for binaryRecordsStream
36cb0fd [freeman] Add binaryRecordsStream to scala
fe4e803 [freeman] Add binaryRecordStream to Java API
ecef0eb [freeman] Add binaryRecordsStream to python
8550c26 [freeman] Expose additional argument combination
A slow receiver might not have enough time to shutdown cleanly even when graceful shutdown is used. This PR extends graceful waiting to make sure all receivers have deregistered and that the receiver job has terminated.
Author: Jesper Lundgren <jesper.lundgren@vpon.com>
Closes#4338 from cleaton/stopreceivers and squashes the following commits:
a9cf223 [Jesper Lundgren] remove cleaner.ttl config
f969b6e [Jesper Lundgren] fix inversed logic in unit test
3d0bd35 [Jesper Lundgren] switch boleans to match running status instead of terminated
9a9ff88 [Jesper Lundgren] wait for receivers to shutdown and receiver job to terminate
d179372 [Jesper Lundgren] Add graceful shutdown unit test covering slow receiver onStop
These are needed transitively from the other Jetty libraries
we include. It was not picked up by unit tests because we
disable the UI.
Author: Patrick Wendell <patrick@databricks.com>
Closes#4323 from pwendell/jetty and squashes the following commits:
d8669da [Patrick Wendell] SPARK-3996: Add jetty servlet and continuations.
SPARK-3883: SSL support for Akka connections and Jetty based file servers.
This story introduced the following changes:
- Introduced SSLOptions object which holds the SSL configuration and can build the appropriate configuration for Akka or Jetty. SSLOptions can be created by parsing SparkConf entries at a specified namespace.
- SSLOptions is created and kept by SecurityManager
- All Akka actor address creation snippets based on interpolated strings were replaced by a dedicated methods from AkkaUtils. Those methods select the proper Akka protocol - whether akka.tcp or akka.ssl.tcp
- Added tests cases for AkkaUtils, FileServer, SSLOptions and SecurityManager
- Added a way to use node local SSL configuration by executors and driver in standalone mode. It can be done by specifying spark.ssl.useNodeLocalConf in SparkConf.
- Made CoarseGrainedExecutorBackend not overwrite the settings which are executor startup configuration - they are passed anyway from Worker
Refer to https://github.com/apache/spark/pull/3571 for discussion and details
Author: Jacek Lewandowski <lewandowski.jacek@gmail.com>
Author: Jacek Lewandowski <jacek.lewandowski@datastax.com>
Closes#3571 from jacek-lewandowski/SPARK-3883-master and squashes the following commits:
9ef4ed1 [Jacek Lewandowski] Merge pull request #2 from jacek-lewandowski/SPARK-3883-docs2
fb31b49 [Jacek Lewandowski] SPARK-3883: Added SSL setup documentation
2532668 [Jacek Lewandowski] SPARK-3883: Refactored AkkaUtils.protocol method to not use Try
90a8762 [Jacek Lewandowski] SPARK-3883: Refactored methods to resolve Akka address and made it possible to easily configure multiple communication layers for SSL
72b2541 [Jacek Lewandowski] SPARK-3883: A reference to the fallback SSLOptions can be provided when constructing SSLOptions
93050f4 [Jacek Lewandowski] SPARK-3883: SSL support for HttpServer and Akka
Whenever a directory is created by the utility method, immediately restrict
its permissions so that only the owner has access to its contents.
Signed-off-by: Josh Rosen <joshrosen@databricks.com>
(v2 of this patch with a fix that was only relevant for the maven build).
This patch piggy-back's on vanzin's work to simplify the Guava shading,
and adds Jetty as a shaded library in Spark. Other than adding Jetty,
it consilidates the <artifactSet>'s into the root pom. I found it was
a bit easier to follow that way, since you don't need to look into
child pom's to find out specific artifact sets included in shading.
Author: Patrick Wendell <patrick@databricks.com>
Closes#4285 from pwendell/jetty and squashes the following commits:
d3e7f4e [Patrick Wendell] Fix for shaded deps causing compile errors
19f0710 [Patrick Wendell] More code review feedback
961452d [Patrick Wendell] Responding to feedback from Marcello
6df25ca [Patrick Wendell] [WIP] [SPARK-3996]: Shade Jetty in Spark deliverables
This PR refactors LiveListenerBus and StreamingListenerBus and extracts the common codes to a parent class `ListenerBus`.
It also includes bug fixes in #3710:
1. Fix the race condition of queueFullErrorMessageLogged in LiveListenerBus and StreamingListenerBus to avoid outputing `queue-full-error` logs multiple times.
2. Make sure the SHUTDOWN message will be delivered to listenerThread, so that we can make sure listenerThread will always be able to exit.
3. Log the error from listener rather than crashing listenerThread in StreamingListenerBus.
During fixing the above bugs, we find it's better to make LiveListenerBus and StreamingListenerBus have the same bahaviors. Then there will be many duplicated codes in LiveListenerBus and StreamingListenerBus.
Therefore, I extracted their common codes to `ListenerBus` as a parent class: LiveListenerBus and StreamingListenerBus only need to extend `ListenerBus` and implement `onPostEvent` (how to process an event) and `onDropEvent` (do something when droppping an event).
Author: zsxwing <zsxwing@gmail.com>
Closes#4006 from zsxwing/SPARK-4859-refactor and squashes the following commits:
c8dade2 [zsxwing] Fix the code style after renaming
5715061 [zsxwing] Rename ListenerHelper to ListenerBus and the original ListenerBus to AsynchronousListenerBus
f0ef647 [zsxwing] Fix the code style
4e85ffc [zsxwing] Merge branch 'master' into SPARK-4859-refactor
d2ef990 [zsxwing] Add private[spark]
4539f91 [zsxwing] Remove final to pass MiMa tests
a9dccd3 [zsxwing] Remove SparkListenerShutdown
7cc04c3 [zsxwing] Refactor LiveListenerBus and StreamingListenerBus and make them share same code base
One side-effect of shading guava is that it disappears as a transitive
dependency. For Hadoop 2.x, this was masked by the fact that Hadoop
itself depends on guava. But certain versions of Hadoop 1.x also
shade guava, leaving either no guava or some random version pulled
by another dependency on the classpath.
So be explicit about the dependency in modules that use guava directly,
which is the right thing to do anyway.
Author: Marcelo Vanzin <vanzin@cloudera.com>
Closes#4272 from vanzin/SPARK-5466 and squashes the following commits:
e3f30e5 [Marcelo Vanzin] Dependency for catalyst is not needed.
d3b2c84 [Marcelo Vanzin] [SPARK-5466] Add explicit guava dependencies where needed.
The current way of shading Guava is a little problematic. Code that
depends on "spark-core" does not see the transitive dependency, yet
classes in "spark-core" actually depend on Guava. So it's a little
tricky to run unit tests that use spark-core classes, since you need
a compatible version of Guava in your dependencies when running the
tests. This can become a little tricky, and is kind of a bad user
experience.
This change modifies the way Guava is shaded so that it's applied
uniformly across the Spark build. This means Guava is shaded inside
spark-core itself, so that the dependency issues above are solved.
Aside from that, all Spark sub-modules have their Guava references
relocated, so that they refer to the relocated classes now packaged
inside spark-core. Before, this was only done by the time the assembly
was built, so projects that did not end up inside the assembly (such
as streaming backends) could still reference the original location
of Guava classes.
The Guava classes are added to the "first" artifact Spark generates
(network-common), so that all downstream modules have the needed
classes available. Since "network-common" is a dependency of spark-core,
all Spark apps should get the relocated classes automatically.
Author: Marcelo Vanzin <vanzin@cloudera.com>
Closes#3658 from vanzin/SPARK-4809 and squashes the following commits:
3c93e42 [Marcelo Vanzin] Shade Guava in the network-common artifact.
5d69ec9 [Marcelo Vanzin] Merge branch 'master' into SPARK-4809
b3104fc [Marcelo Vanzin] Add comment.
941848f [Marcelo Vanzin] Merge branch 'master' into SPARK-4809
f78c48a [Marcelo Vanzin] Merge branch 'master' into SPARK-4809
8053dd4 [Marcelo Vanzin] Merge branch 'master' into SPARK-4809
107d7da [Marcelo Vanzin] Add fix for SPARK-5052 (PR #3874).
40b8723 [Marcelo Vanzin] Merge branch 'master' into SPARK-4809
4a4ed42 [Marcelo Vanzin] [SPARK-4809] Rework Guava library shading.
Another trivial one. The RAT failure was due to temp files from `FailureSuite` not being cleaned up. This just makes the cleanup more reliable by using the standard temp dir mechanism.
Author: Sean Owen <sowen@cloudera.com>
Closes#4189 from srowen/SPARK-4430 and squashes the following commits:
9ea63ff [Sean Owen] Properly acquire a temp directory to ensure it is cleaned up at shutdown, which helps avoid a RAT check failure
`reduceByWindow` for Java API is actually not Java compatible, change to make it Java compatible.
Current solution is to deprecate the old one and add a new API, but since old API actually is not correct, so is keeping the old one meaningful? just to keep the binary compatible? Also even adding new API still need to add to Mima exclusion, I'm not sure to change the API, or deprecate the old API and add a new one, which is the best solution?
Author: jerryshao <saisai.shao@intel.com>
Closes#4104 from jerryshao/SPARK-5315 and squashes the following commits:
5bc8987 [jerryshao] Address the comment
c7aa1b4 [jerryshao] Deprecate the old one to keep binary compatible
8e9dc67 [jerryshao] Fix JavaDStream reduceByWindow signature error
Because of lacking of `BlockAllocationEvent` in WAL recovery, the dangled event will mix into the new batch, which will lead to the wrong result. Details can be seen in [SPARK-5233](https://issues.apache.org/jira/browse/SPARK-5233).
Author: jerryshao <saisai.shao@intel.com>
Closes#4032 from jerryshao/SPARK-5233 and squashes the following commits:
f0b0c0b [jerryshao] Further address the comments
a237c75 [jerryshao] Address the comments
e356258 [jerryshao] Fix bug in unit test
558bdc3 [jerryshao] Correctly replay the WAL log when recovering from failure
This is a refactored fix based on jerryshao 's PR #4037
This enabled deletion of old WAL files containing the received block data.
Improvements over #4037
- Respecting the rememberDuration of all receiver streams. In #4037, if there were two receiver streams with multiple remember durations, the deletion would have delete based on the shortest remember duration, thus deleting data prematurely for the receiver stream with longer remember duration.
- Added unit test to test creation of receiver WAL, automatic deletion, and respecting of remember duration.
jerryshao I am going to merge this ASAP to make it 1.2.1 Thanks for the initial draft of this PR. Made my job much easier.
Author: Tathagata Das <tathagata.das1565@gmail.com>
Author: jerryshao <saisai.shao@intel.com>
Closes#4149 from tdas/SPARK-5147 and squashes the following commits:
730798b [Tathagata Das] Added comments.
c4cf067 [Tathagata Das] Minor fixes
2579b27 [Tathagata Das] Refactored the fix to make sure that the cleanup respects the remember duration of all the receiver streams
2736fd1 [jerryshao] Delete the old WAL log periodically
Current Java file stream doesn't support custom key/value type because of loss of type information, details can be seen in [SPARK-5297](https://issues.apache.org/jira/browse/SPARK-5297). Fix this problem by getting correct `ClassTag` from `Class[_]`.
Author: jerryshao <saisai.shao@intel.com>
Closes#4101 from jerryshao/SPARK-5297 and squashes the following commits:
e022ca3 [jerryshao] Add Mima exclusion
ecd61b8 [jerryshao] Fix Java fileInputStream type erasure problem
Include the python source code into assembly jar.
cc mengxr pwendell
Author: Davies Liu <davies@databricks.com>
Closes#4128 from davies/build_streaming2 and squashes the following commits:
546af4c [Davies Liu] fix indent
48859b2 [Davies Liu] include python source code
- The ReceiverTracker receivers `RegisterReceiver` messages two times
1) When the actor at `ReceiverSupervisorImpl`'s preStart is invoked
2) After the receiver is started at the executor `onReceiverStart()` at `ReceiverSupervisorImpl`
Though, RegisterReceiver message uses the same streamId and the receiverInfo gets updated everytime
the message is processed at the `ReceiverTracker`, it makes sense to call register receiver only after the
receiver is started.
Author: Ilayaperumal Gopinathan <igopinathan@pivotal.io>
Closes#3648 from ilayaperumalg/RTActor-remove-prestart and squashes the following commits:
868efab [Ilayaperumal Gopinathan] Increase receiverInfo collector timeout to 2 secs
3118e5e [Ilayaperumal Gopinathan] Fix StreamingListenerSuite's startedReceiverStreamIds size
634abde [Ilayaperumal Gopinathan] Remove duplicate RegisterReceiver message
Currently WAL-backed block is read out from HDFS and put into BlockManger with storage level MEMORY_ONLY_SER by default, since WAL-backed block is already materialized in HDFS with fault-tolerance, no need to put into BlockManger again by default.
Author: jerryshao <saisai.shao@intel.com>
Closes#3906 from jerryshao/SPARK-4999 and squashes the following commits:
b95f95e [jerryshao] Change storeInBlockManager to false by default
