A review of the code, working back from Hadoop's `FileSystem.exists()` and `FileSystem.isDirectory()` code, then removing uses of the calls when superfluous.
1. delete is harmless if called on a nonexistent path, so don't do any checks before deletes
1. any `FileSystem.exists()` check before `getFileStatus()` or `open()` is superfluous as the operation itself does the check. Instead the `FileNotFoundException` is caught and triggers the downgraded path. When a `FileNotFoundException` was thrown before, the code still creates a new FNFE with the error messages. Though now the inner exceptions are nested, for easier diagnostics.
Initially, relying on Jenkins test runs.
One troublespot here is that some of the codepaths are clearly error situations; it's not clear that they have coverage anyway. Trying to create the failure conditions in tests would be ideal, but it will also be hard.
Author: Steve Loughran <stevel@apache.org>
Closes#14371 from steveloughran/cloud/SPARK-16736-superfluous-fs-calls.
## What changes were proposed in this pull request?
This PR adds a field to subquery alias in order to make the usage of views in a resolved `LogicalPlan` more visible (and more understandable).
For example, the following view and query:
```sql
create view constants as select 1 as id union all select 1 union all select 42
select * from constants;
```
...now yields the following analyzed plan:
```
Project [id#39]
+- SubqueryAlias c, `default`.`constants`
+- Project [gen_attr_0#36 AS id#39]
+- SubqueryAlias gen_subquery_0
+- Union
:- Union
: :- Project [1 AS gen_attr_0#36]
: : +- OneRowRelation$
: +- Project [1 AS gen_attr_1#37]
: +- OneRowRelation$
+- Project [42 AS gen_attr_2#38]
+- OneRowRelation$
```
## How was this patch tested?
Added tests for the two code paths in `SessionCatalogSuite` (sql/core) and `HiveMetastoreCatalogSuite` (sql/hive)
Author: Herman van Hovell <hvanhovell@databricks.com>
Closes#14657 from hvanhovell/SPARK-17068.
## What changes were proposed in this pull request?
This PR is a small follow-up to https://github.com/apache/spark/pull/14554. This also widens the visibility of a few (similar) Hive classes.
## How was this patch tested?
No test. Only a visibility change.
Author: Herman van Hovell <hvanhovell@databricks.com>
Closes#14654 from hvanhovell/SPARK-16964-hive.
## What changes were proposed in this pull request?
This patch updates the SQL parser to parse negative numeric literals as numeric literals, instead of unary minus of positive literals.
This allows the parser to parse the minimal value for each data type, e.g. "-32768S".
## How was this patch tested?
Updated test cases.
Author: petermaxlee <petermaxlee@gmail.com>
Closes#14608 from petermaxlee/SPARK-17013.
## What changes were proposed in this pull request?
This patch introduces SQLQueryTestSuite, a basic framework for end-to-end SQL test cases defined in spark/sql/core/src/test/resources/sql-tests. This is a more standard way to test SQL queries end-to-end in different open source database systems, because it is more manageable to work with files.
This is inspired by HiveCompatibilitySuite, but simplified for general Spark SQL tests. Once this is merged, I can work towards porting SQLQuerySuite over, and eventually also move the existing HiveCompatibilitySuite to use this framework.
Unlike HiveCompatibilitySuite, SQLQueryTestSuite compares both the output schema and the output data (in string form).
When there is a mismatch, the error message looks like the following:
```
[info] - blacklist.sql !!! IGNORED !!!
[info] - number-format.sql *** FAILED *** (2 seconds, 405 milliseconds)
[info] Expected "...147483648 -214748364[8]", but got "...147483648 -214748364[9]" Result should match for query #1 (SQLQueryTestSuite.scala:171)
[info] org.scalatest.exceptions.TestFailedException:
[info] at org.scalatest.Assertions$class.newAssertionFailedException(Assertions.scala:495)
[info] at org.scalatest.FunSuite.newAssertionFailedException(FunSuite.scala:1555)
[info] at org.scalatest.Assertions$class.assertResult(Assertions.scala:1171)
```
## How was this patch tested?
This is a test infrastructure change.
Author: petermaxlee <petermaxlee@gmail.com>
Closes#14472 from petermaxlee/SPARK-16866.
### What changes were proposed in this pull request?
The `comment` in `CatalogTable` returned from Hive is always empty. We store it in the table property when creating a table. However, when we try to retrieve the table metadata from Hive metastore, we do not rebuild it. The `comment` is always empty.
This PR is to fix the issue.
### How was this patch tested?
Fixed the test case to verify the change.
Author: gatorsmile <gatorsmile@gmail.com>
Closes#14550 from gatorsmile/tableComment.
## What changes were proposed in this pull request?
MSCK REPAIR TABLE could be used to recover the partitions in external catalog based on partitions in file system.
Another syntax is: ALTER TABLE table RECOVER PARTITIONS
The implementation in this PR will only list partitions (not the files with a partition) in driver (in parallel if needed).
## How was this patch tested?
Added unit tests for it and Hive compatibility test suite.
Author: Davies Liu <davies@databricks.com>
Closes#14500 from davies/repair_table.
## What changes were proposed in this pull request?
This package is meant to be internal, and as a result it does not make sense to mark things as private[sql] or private[spark]. It simply makes debugging harder when Spark developers need to inspect the plans at runtime.
This patch removes all private[sql] and private[spark] visibility modifiers in org.apache.spark.sql.execution.
## How was this patch tested?
N/A - just visibility changes.
Author: Reynold Xin <rxin@databricks.com>
Closes#14554 from rxin/remote-private.
## What changes were proposed in this pull request?
For ORC source, Spark SQL has a writer option `compression`, which is used to set the codec and its value will be also set to `orc.compress` (the orc conf used for codec). However, if a user only set `orc.compress` in the writer option, we should not use the default value of `compression` (snappy) as the codec. Instead, we should respect the value of `orc.compress`.
This PR makes ORC data source not ignoring `orc.compress` when `comperssion` is unset.
So, here is the behaviour,
1. Check `compression` and use this if it is set.
2. If `compression` is not set, check `orc.compress` and use it.
3. If `compression` and `orc.compress` are not set, then use the default snappy.
## How was this patch tested?
Unit test in `OrcQuerySuite`.
Author: hyukjinkwon <gurwls223@gmail.com>
Closes#14518 from HyukjinKwon/SPARK-16610.
## What changes were proposed in this pull request?
Avoid using postfix operation for command execution in SQLQuerySuite where it wasn't whitelisted and audit existing whitelistings removing postfix operators from most places. Some notable places where postfix operation remains is in the XML parsing & time units (seconds, millis, etc.) where it arguably can improve readability.
## How was this patch tested?
Existing tests.
Author: Holden Karau <holden@us.ibm.com>
Closes#14407 from holdenk/SPARK-16779.
#### What changes were proposed in this pull request?
When doing a CTAS with a Partition By clause, we got a wrong error message.
For example,
```SQL
CREATE TABLE gen__tmp
PARTITIONED BY (key string)
AS SELECT key, value FROM mytable1
```
The error message we get now is like
```
Operation not allowed: Schema may not be specified in a Create Table As Select (CTAS) statement(line 2, pos 0)
```
However, based on the code, the message we should get is like
```
Operation not allowed: A Create Table As Select (CTAS) statement is not allowed to create a partitioned table using Hive's file formats. Please use the syntax of "CREATE TABLE tableName USING dataSource OPTIONS (...) PARTITIONED BY ...\" to create a partitioned table through a CTAS statement.(line 2, pos 0)
```
Currently, partitioning columns is part of the schema. This PR fixes the bug by changing the detection orders.
#### How was this patch tested?
Added test cases.
Author: gatorsmile <gatorsmile@gmail.com>
Closes#14113 from gatorsmile/ctas.
## What changes were proposed in this pull request?
When we create the HiveConf for metastore client, we use a Hadoop Conf as the base, which may contain Hive settings in hive-site.xml (https://github.com/apache/spark/blob/master/sql/core/src/main/scala/org/apache/spark/sql/internal/SharedState.scala#L49). However, HiveConf's initialize function basically ignores the base Hadoop Conf and always its default values (i.e. settings with non-null default values) as the base (https://github.com/apache/hive/blob/release-1.2.1/common/src/java/org/apache/hadoop/hive/conf/HiveConf.java#L2687). So, even a user put javax.jdo.option.ConnectionURL in hive-site.xml, it is not used and Hive will use its default, which is jdbc:derby:;databaseName=metastore_db;create=true.
This issue only shows up when `spark.sql.hive.metastore.jars` is not set to builtin.
## How was this patch tested?
New test in HiveSparkSubmitSuite.
Author: Yin Huai <yhuai@databricks.com>
Closes#14497 from yhuai/SPARK-16901.
## What changes were proposed in this pull request?
we have various logical plans for CREATE TABLE and CTAS: `CreateTableUsing`, `CreateTableUsingAsSelect`, `CreateHiveTableAsSelectLogicalPlan`. This PR unifies them to reduce the complexity and centralize the error handling.
## How was this patch tested?
existing tests
Author: Wenchen Fan <wenchen@databricks.com>
Closes#14482 from cloud-fan/table.
## What changes were proposed in this pull request?
These 2 methods take `CatalogTable` as parameter, which already have the database information.
## How was this patch tested?
existing test
Author: Wenchen Fan <wenchen@databricks.com>
Closes#14476 from cloud-fan/minor5.
## What changes were proposed in this pull request?
Partition discovery is rather expensive, so we should do it at execution time instead of during physical planning. Right now there is not much benefit since ListingFileCatalog will read scan for all partitions at planning time anyways, but this can be optimized in the future. Also, there might be more information for partition pruning not available at planning time.
This PR moves a lot of the file scan logic from planning to execution time. All file scan operations are handled by `FileSourceScanExec`, which handles both batched and non-batched file scans. This requires some duplication with `RowDataSourceScanExec`, but is probably worth it so that `FileSourceScanExec` does not need to depend on an input RDD.
TODO: In another pr, move DataSourceScanExec to it's own file.
## How was this patch tested?
Existing tests (it might be worth adding a test that catalog.listFiles() is delayed until execution, but this can be delayed until there is an actual benefit to doing so).
Author: Eric Liang <ekl@databricks.com>
Closes#14241 from ericl/refactor.
### What changes were proposed in this pull request?
This PR is to remove `TestHiveSharedState`.
Also, this is also associated with the Hive refractoring for removing `HiveSharedState`.
### How was this patch tested?
The existing test cases
Author: gatorsmile <gatorsmile@gmail.com>
Closes#14463 from gatorsmile/removeTestHiveSharedState.
## What changes were proposed in this pull request?
With SPARK-15034, we could use the value of spark.sql.warehouse.dir to set the warehouse location. In TestHive, we can now simply set the temporary warehouse path in sc's conf, and thus, param "warehousePath" could be removed.
## How was this patch tested?
exsiting testsuites.
Author: jiangxingbo <jiangxingbo@meituan.com>
Closes#14401 from jiangxb1987/warehousePath.
## What changes were proposed in this pull request?
`StructField` has very similar semantic with `CatalogColumn`, except that `CatalogColumn` use string to express data type. I think it's reasonable to use `StructType` as the `CatalogTable.schema` and remove `CatalogColumn`.
## How was this patch tested?
existing tests.
Author: Wenchen Fan <wenchen@databricks.com>
Closes#14363 from cloud-fan/column.
#### What changes were proposed in this pull request?
Currently, in Spark SQL, the initial creation of schema can be classified into two groups. It is applicable to both Hive tables and Data Source tables:
**Group A. Users specify the schema.**
_Case 1 CREATE TABLE AS SELECT_: the schema is determined by the result schema of the SELECT clause. For example,
```SQL
CREATE TABLE tab STORED AS TEXTFILE
AS SELECT * from input
```
_Case 2 CREATE TABLE_: users explicitly specify the schema. For example,
```SQL
CREATE TABLE jsonTable (_1 string, _2 string)
USING org.apache.spark.sql.json
```
**Group B. Spark SQL infers the schema at runtime.**
_Case 3 CREATE TABLE_. Users do not specify the schema but the path to the file location. For example,
```SQL
CREATE TABLE jsonTable
USING org.apache.spark.sql.json
OPTIONS (path '${tempDir.getCanonicalPath}')
```
Before this PR, Spark SQL does not store the inferred schema in the external catalog for the cases in Group B. When users refreshing the metadata cache, accessing the table at the first time after (re-)starting Spark, Spark SQL will infer the schema and store the info in the metadata cache for improving the performance of subsequent metadata requests. However, the runtime schema inference could cause undesirable schema changes after each reboot of Spark.
This PR is to store the inferred schema in the external catalog when creating the table. When users intend to refresh the schema after possible changes on external files (table location), they issue `REFRESH TABLE`. Spark SQL will infer the schema again based on the previously specified table location and update/refresh the schema in the external catalog and metadata cache.
In this PR, we do not use the inferred schema to replace the user specified schema for avoiding external behavior changes . Based on the design, user-specified schemas (as described in Group A) can be changed by ALTER TABLE commands, although we do not support them now.
#### How was this patch tested?
TODO: add more cases to cover the changes.
Author: gatorsmile <gatorsmile@gmail.com>
Closes#14207 from gatorsmile/userSpecifiedSchema.
## What changes were proposed in this pull request?
We currently test subquery SQL building using the `HiveCompatibilitySuite`. The is not desired since SQL building is actually a part of `sql/core` and because we are slowly reducing our dependency on Hive. This PR adds the same tests from the whitelist of `HiveCompatibilitySuite` into `LogicalPlanToSQLSuite`.
## How was this patch tested?
This adds more testcases. Pass the Jenkins tests.
Author: Dongjoon Hyun <dongjoon@apache.org>
Closes#14383 from dongjoon-hyun/SPARK-15232.
## What changes were proposed in this pull request?
Currently, the generated SQLs have not-stable IDs for generated attributes.
The stable generated SQL will give more benefit for understanding or testing the queries.
This PR provides stable SQL generation by the followings.
- Provide unique ids for generated subqueries, `gen_subquery_xxx`.
- Provide unique and stable ids for generated attributes, `gen_attr_xxx`.
**Before**
```scala
scala> new org.apache.spark.sql.catalyst.SQLBuilder(sql("select 1")).toSQL
res0: String = SELECT `gen_attr_0` AS `1` FROM (SELECT 1 AS `gen_attr_0`) AS gen_subquery_0
scala> new org.apache.spark.sql.catalyst.SQLBuilder(sql("select 1")).toSQL
res1: String = SELECT `gen_attr_4` AS `1` FROM (SELECT 1 AS `gen_attr_4`) AS gen_subquery_0
```
**After**
```scala
scala> new org.apache.spark.sql.catalyst.SQLBuilder(sql("select 1")).toSQL
res1: String = SELECT `gen_attr_0` AS `1` FROM (SELECT 1 AS `gen_attr_0`) AS gen_subquery_0
scala> new org.apache.spark.sql.catalyst.SQLBuilder(sql("select 1")).toSQL
res2: String = SELECT `gen_attr_0` AS `1` FROM (SELECT 1 AS `gen_attr_0`) AS gen_subquery_0
```
## How was this patch tested?
Pass the existing Jenkins tests.
Author: Dongjoon Hyun <dongjoon@apache.org>
Closes#14257 from dongjoon-hyun/SPARK-16621.
## What changes were proposed in this pull request?
Currently there are 2 inconsistence:
1. for data source table, we only print partition names, for hive table, we also print partition schema. After this PR, we will always print schema
2. if column doesn't have comment, data source table will print empty string, hive table will print null. After this PR, we will always print null
## How was this patch tested?
new test in `HiveDDLSuite`
Author: Wenchen Fan <wenchen@databricks.com>
Closes#14302 from cloud-fan/minor3.
## What changes were proposed in this pull request?
This PR contains three changes.
First, this PR changes the behavior of lead/lag back to Spark 1.6's behavior, which is described as below:
1. lead/lag respect null input values, which means that if the offset row exists and the input value is null, the result will be null instead of the default value.
2. If the offset row does not exist, the default value will be used.
3. OffsetWindowFunction's nullable setting also considers the nullability of its input (because of the first change).
Second, this PR fixes the evaluation of lead/lag when the input expression is a literal. This fix is a result of the first change. In current master, if a literal is used as the input expression of a lead or lag function, the result will be this literal even if the offset row does not exist.
Third, this PR makes ResolveWindowFrame not fire if a window function is not resolved.
## How was this patch tested?
New tests in SQLWindowFunctionSuite
Author: Yin Huai <yhuai@databricks.com>
Closes#14284 from yhuai/lead-lag.
## What changes were proposed in this pull request?
Currently, `SQLBuilder` raises `empty.reduceLeft` exceptions on *unoptimized* `EXISTS` queries. We had better prevent this.
```scala
scala> sql("CREATE TABLE t1(a int)")
scala> val df = sql("select * from t1 b where exists (select * from t1 a)")
scala> new org.apache.spark.sql.catalyst.SQLBuilder(df).toSQL
java.lang.UnsupportedOperationException: empty.reduceLeft
```
## How was this patch tested?
Pass the Jenkins tests with a new test suite.
Author: Dongjoon Hyun <dongjoon@apache.org>
Closes#14307 from dongjoon-hyun/SPARK-16672.
## What changes were proposed in this pull request?
**Issue 1: Disallow Creating/Altering a View when the same-name Table Exists (without IF NOT EXISTS)**
When we create OR alter a view, we check whether the view already exists. In the current implementation, if a table with the same name exists, we treat it as a view. However, this is not the right behavior. We should follow what Hive does. For example,
```
hive> CREATE TABLE tab1 (id int);
OK
Time taken: 0.196 seconds
hive> CREATE OR REPLACE VIEW tab1 AS SELECT * FROM t1;
FAILED: SemanticException [Error 10218]: Existing table is not a view
The following is an existing table, not a view: default.tab1
hive> ALTER VIEW tab1 AS SELECT * FROM t1;
FAILED: SemanticException [Error 10218]: Existing table is not a view
The following is an existing table, not a view: default.tab1
hive> CREATE VIEW IF NOT EXISTS tab1 AS SELECT * FROM t1;
OK
Time taken: 0.678 seconds
```
**Issue 2: Strange Error when Issuing Load Table Against A View**
Users should not be allowed to issue LOAD DATA against a view. Currently, when users doing it, we got a very strange runtime error. For example,
```SQL
LOAD DATA LOCAL INPATH "$testData" INTO TABLE $viewName
```
```
java.lang.reflect.InvocationTargetException was thrown.
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at org.apache.spark.sql.hive.client.Shim_v0_14.loadTable(HiveShim.scala:680)
```
## How was this patch tested?
Added test cases
Author: gatorsmile <gatorsmile@gmail.com>
Closes#14314 from gatorsmile/tableDDLAgainstView.
## What changes were proposed in this pull request?
This PR fixes a minor formatting issue of `WindowSpecDefinition.sql` when no partitioning expressions are present.
Before:
```sql
( ORDER BY `a` ASC ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW)
```
After:
```sql
(ORDER BY `a` ASC ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW)
```
## How was this patch tested?
New test case added in `ExpressionSQLBuilderSuite`.
Author: Cheng Lian <lian@databricks.com>
Closes#14334 from liancheng/window-spec-sql-format.
## What changes were proposed in this pull request?
It's weird that we have `BucketSpec` to abstract bucket info, but don't use it in `CatalogTable`. This PR moves `BucketSpec` into catalyst module.
## How was this patch tested?
existing tests.
Author: Wenchen Fan <wenchen@databricks.com>
Closes#14331 from cloud-fan/check.
## What changes were proposed in this pull request?
`CreateViewCommand` only needs some information of a `CatalogTable`, but not all of them. We have some tricks(e.g. we need to check the table type is `VIEW`, we need to make `CatalogColumn.dataType` nullable) to allow it to take a `CatalogTable`.
This PR cleans it up and only pass in necessary information to `CreateViewCommand`.
## How was this patch tested?
existing tests.
Author: Wenchen Fan <wenchen@databricks.com>
Closes#14297 from cloud-fan/minor2.
## What changes were proposed in this pull request?
Default `TreeNode.withNewChildren` implementation doesn't work for `Last` and when both constructor arguments are the same, e.g.:
```sql
LAST_VALUE(FALSE) -- The 2nd argument defaults to FALSE
LAST_VALUE(FALSE, FALSE)
LAST_VALUE(TRUE, TRUE)
```
This is because although `Last` is a unary expression, both of its constructor arguments, `child` and `ignoreNullsExpr`, are `Expression`s. When they have the same value, `TreeNode.withNewChildren` treats both of them as child nodes by mistake. `First` is also affected by this issue in exactly the same way.
This PR fixes this issue by making `ignoreNullsExpr` a child expression of `First` and `Last`.
## How was this patch tested?
New test case added in `WindowQuerySuite`.
Author: Cheng Lian <lian@databricks.com>
Closes#14295 from liancheng/spark-16648-last-value.
## What changes were proposed in this pull request?
we also store data source table options in this field, it's unreasonable to call it `serdeProperties`.
## How was this patch tested?
N/A
Author: Wenchen Fan <wenchen@databricks.com>
Closes#14283 from cloud-fan/minor1.
## Problem
The current `sed` in `test_script.sh` is missing a `$`, leading to the failure of `script` test on OS X:
```
== Results ==
!== Correct Answer - 2 == == Spark Answer - 2 ==
![x1_y1] [x1]
![x2_y2] [x2]
```
In addition, this `script` test would also fail on systems like Windows where we couldn't be able to invoke `bash` or `echo | sed`.
## What changes were proposed in this pull request?
This patch
- fixes `sed` in `test_script.sh`
- adds command guards so that the `script` test would pass on systems like Windows
## How was this patch tested?
- Jenkins
- Manually verified tests pass on OS X
Author: Liwei Lin <lwlin7@gmail.com>
Closes#14280 from lw-lin/osx-sed.
## What changes were proposed in this pull request?
after https://github.com/apache/spark/pull/12945, we renamed the `registerTempTable` to `createTempView`, as we do create a view actually. This PR renames `SQLTestUtils.withTempTable` to reflect this change.
## How was this patch tested?
N/A
Author: Wenchen Fan <wenchen@databricks.com>
Closes#14318 from cloud-fan/minor4.
## What changes were proposed in this pull request?
This PR adds `str_to_map` SQL function in order to remove Hive fallback.
## How was this patch tested?
Pass the Jenkins tests with newly added.
Author: Sandeep Singh <sandeep@techaddict.me>
Closes#13990 from techaddict/SPARK-16287.
## What changes were proposed in this pull request?
Due to backward-compatibility reasons, the following Parquet schema is ambiguous:
```
optional group f (LIST) {
repeated group list {
optional group element {
optional int32 element;
}
}
}
```
According to the parquet-format spec, when interpreted as a standard 3-level layout, this type is equivalent to the following SQL type:
```
ARRAY<STRUCT<element: INT>>
```
However, when interpreted as a legacy 2-level layout, it's equivalent to
```
ARRAY<STRUCT<element: STRUCT<element: INT>>>
```
Historically, to disambiguate these cases, we employed two methods:
- `ParquetSchemaConverter.isElementType()`
Used to disambiguate the above cases while converting Parquet types to Spark types.
- `ParquetRowConverter.isElementType()`
Used to disambiguate the above cases while instantiating row converters that convert Parquet records to Spark rows.
Unfortunately, these two methods make different decision about the above problematic Parquet type, and caused SPARK-16344.
`ParquetRowConverter.isElementType()` is necessary for Spark 1.4 and earlier versions because Parquet requested schemata are directly converted from Spark schemata in these versions. The converted Parquet schemata may be incompatible with actual schemata of the underlying physical files when the files are written by a system/library that uses a schema conversion scheme that is different from Spark when writing Parquet LIST and MAP fields.
In Spark 1.5, Parquet requested schemata are always properly tailored from schemata of physical files to be read. Thus `ParquetRowConverter.isElementType()` is no longer necessary. This PR replaces this method with a simply yet accurate scheme: whenever an ambiguous Parquet type is hit, convert the type in question back to a Spark type using `ParquetSchemaConverter` and check whether it matches the corresponding Spark type.
## How was this patch tested?
New test cases added in `ParquetHiveCompatibilitySuite` and `ParquetQuerySuite`.
Author: Cheng Lian <lian@databricks.com>
Closes#14014 from liancheng/spark-16344-for-master-and-2.0.
## What changes were proposed in this pull request?
In 2.0, we add a new logic to convert HiveTableScan on ORC tables to Spark's native code path. However, during this conversion, we drop the original metastore schema (https://issues.apache.org/jira/browse/SPARK-15705). Because of this regression, I am changing the default value of `spark.sql.hive.convertMetastoreOrc` to false.
Author: Yin Huai <yhuai@databricks.com>
Closes#14267 from yhuai/SPARK-15705-changeDefaultValue.
https://issues.apache.org/jira/browse/SPARK-16535
## What changes were proposed in this pull request?
When I scan through the pom.xml of sub projects, I found this warning as below and attached screenshot
```
Definition of groupId is redundant, because it's inherited from the parent
```
I've tried to remove some of the lines with groupId definition, and the build on my local machine is still ok.
```
<groupId>org.apache.spark</groupId>
```
As I just find now `<maven.version>3.3.9</maven.version>` is being used in Spark 2.x, and Maven-3 supports versionless parent elements: Maven 3 will remove the need to specify the parent version in sub modules. THIS is great (in Maven 3.1).
ref: http://stackoverflow.com/questions/3157240/maven-3-worth-it/3166762#3166762
## How was this patch tested?
I've tested by re-building the project, and build succeeded.
Author: Xin Ren <iamshrek@126.com>
Closes#14189 from keypointt/SPARK-16535.
## What changes were proposed in this pull request?
This PR improves `LogicalPlanToSQLSuite` to check the generated SQL directly by **structure**. So far, `LogicalPlanToSQLSuite` relies on `checkHiveQl` to ensure the **successful SQL generation** and **answer equality**. However, it does not guarantee the generated SQL is the same or will not be changed unnoticeably.
## How was this patch tested?
Pass the Jenkins. This is only a testsuite change.
Author: Dongjoon Hyun <dongjoon@apache.org>
Closes#14235 from dongjoon-hyun/SPARK-16590.
## What changes were proposed in this pull request?
In ScriptInputOutputSchema, we read default RecordReader and RecordWriter from conf. Since Spark 2.0 has deleted those config keys from hive conf, we have to set default reader/writer class name by ourselves. Otherwise we will get None for LazySimpleSerde, the data written would not be able to read by script. The test case added worked fine with previous version of Spark, but would fail now.
## How was this patch tested?
added a test case in SQLQuerySuite.
Closes#14169
Author: Daoyuan Wang <daoyuan.wang@intel.com>
Author: Yin Huai <yhuai@databricks.com>
Closes#14249 from yhuai/scriptTransformation.
## What changes were proposed in this pull request?
There are some calls to methods or fields (getParameters, properties) which are then passed to Java/Scala collection converters. Unfortunately those fields can be null in some cases and then the conversions throws NPE. We fix it by wrapping calls to those fields and methods with option and then do the conversion.
## How was this patch tested?
Manually tested with a custom Hive metastore.
Author: Jacek Lewandowski <lewandowski.jacek@gmail.com>
Closes#14200 from jacek-lewandowski/SPARK-16528.
#### What changes were proposed in this pull request?
If we create a table pointing to a parquet/json datasets without specifying the schema, describe table command does not show the schema at all. It only shows `# Schema of this table is inferred at runtime`. In 1.6, describe table does show the schema of such a table.
~~For data source tables, to infer the schema, we need to load the data source tables at runtime. Thus, this PR calls the function `lookupRelation`.~~
For data source tables, we infer the schema before table creation. Thus, this PR set the inferred schema as the table schema when table creation.
#### How was this patch tested?
Added test cases
Author: gatorsmile <gatorsmile@gmail.com>
Closes#14148 from gatorsmile/describeSchema.
## What changes were proposed in this pull request?
This patch implements reflect SQL function, which can be used to invoke a Java method in SQL. Slightly different from Hive, this implementation requires the class name and the method name to be literals. This implementation also supports only a smaller number of data types, and requires the function to be static, as suggested by rxin in #13969.
java_method is an alias for reflect, so this should also resolve SPARK-16277.
## How was this patch tested?
Added expression unit tests and an end-to-end test.
Author: petermaxlee <petermaxlee@gmail.com>
Closes#14138 from petermaxlee/reflect-static.
This option is used by Hive to directly delete the files instead of
moving them to the trash. This is needed in certain configurations
where moving the files does not work. For non-Hive tables and partitions,
Spark already behaves as if the PURGE option was set, so there's no
need to do anything.
Hive support for PURGE was added in 0.14 (for tables) and 1.2 (for
partitions), so the code reflects that: trying to use the option with
older versions of Hive will cause an exception to be thrown.
The change is a little noisier than I would like, because of the code
to propagate the new flag through all the interfaces and implementations;
the main changes are in the parser and in HiveShim, aside from the tests
(DDLCommandSuite, VersionsSuite).
Tested by running sql and catalyst unit tests, plus VersionsSuite which
has been updated to test the version-specific behavior. I also ran an
internal test suite that uses PURGE and would not pass previously.
Author: Marcelo Vanzin <vanzin@cloudera.com>
Closes#13831 from vanzin/SPARK-16119.
## What changes were proposed in this pull request?
when query only use metadata (example: partition key), it can return results based on metadata without scanning files. Hive did it in HIVE-1003.
## How was this patch tested?
add unit tests
Author: Lianhui Wang <lianhuiwang09@gmail.com>
Author: Wenchen Fan <wenchen@databricks.com>
Author: Lianhui Wang <lianhuiwang@users.noreply.github.com>
Closes#13494 from lianhuiwang/metadata-only.
## What changes were proposed in this pull request?
In order to make it clear which filters are fully handled by the
underlying datasource we will mark them with an *. This will give a
clear visual queue to users that the filter is being treated differently
by catalyst than filters which are just presented to the underlying
DataSource.
Examples from the FilteredScanSuite, in this example `c IN (...)` is handled by the source, `b < ...` is not
### Before
```
//SELECT a FROM oneToTenFiltered WHERE a + b > 9 AND b < 16 AND c IN ('bbbbbBBBBB', 'cccccCCCCC', 'dddddDDDDD', 'foo')
== Physical Plan ==
Project [a#0]
+- Filter (((a#0 + b#1) > 9) && (b#1 < 16))
+- Scan SimpleFilteredScan(1,10)[a#0,b#1] PushedFilters: [LessThan(b,16), In(c, [bbbbbBBBBB,cccccCCCCC,dddddDDDDD,foo]]
```
### After
```
== Physical Plan ==
Project [a#0]
+- Filter (((a#0 + b#1) > 9) && (b#1 < 16))
+- Scan SimpleFilteredScan(1,10)[a#0,b#1] PushedFilters: [LessThan(b,16), *In(c, [bbbbbBBBBB,cccccCCCCC,dddddDDDDD,foo]]
```
## How was the this patch tested?
Manually tested with the Spark Cassandra Connector, a source which fully handles underlying filters. Now fully handled filters appear with an * next to their names. I can add an automated test as well if requested
Post 1.6.1
Tested by modifying the FilteredScanSuite to run explains.
Author: Russell Spitzer <Russell.Spitzer@gmail.com>
Closes#11317 from RussellSpitzer/SPARK-12639-Star.
Some Hadoop classes needed by the Hive metastore client jars are not present
in Spark's packaging (for example, "org/apache/hadoop/mapred/MRVersion"). So
if the parent class loader fails to find a class, try to load it from the
isolated class loader, in case it's available there.
Tested by setting spark.sql.hive.metastore.jars to local paths with Hive/Hadoop
libraries and verifying that Spark can talk to the metastore.
Author: Marcelo Vanzin <vanzin@cloudera.com>
Closes#14020 from vanzin/SPARK-16349.
## What changes were proposed in this pull request?
After SPARK-16476 (committed earlier today as #14128), we can finally bump the version number.
## How was this patch tested?
N/A
Author: Reynold Xin <rxin@databricks.com>
Closes#14130 from rxin/SPARK-16477.
## What changes were proposed in this pull request?
This PR prevents dropping the current database to avoid errors like the followings.
```scala
scala> sql("create database delete_db")
scala> sql("use delete_db")
scala> sql("drop database delete_db")
scala> sql("create table t as select 1")
org.apache.spark.sql.catalyst.analysis.NoSuchDatabaseException: Database `delete_db` not found;
```
## How was this patch tested?
Pass the Jenkins tests including an updated testcase.
Author: Dongjoon Hyun <dongjoon@apache.org>
Closes#14115 from dongjoon-hyun/SPARK-16459.
## What changes were proposed in this pull request?
This patch implements all remaining xpath functions that Hive supports and not natively supported in Spark: xpath_int, xpath_short, xpath_long, xpath_float, xpath_double, xpath_string, and xpath.
## How was this patch tested?
Added unit tests and end-to-end tests.
Author: petermaxlee <petermaxlee@gmail.com>
Closes#13991 from petermaxlee/SPARK-16318.
## What changes were proposed in this pull request?
This PR adds parse_url SQL functions in order to remove Hive fallback.
A new implementation of #13999
## How was this patch tested?
Pass the exist tests including new testcases.
Author: wujian <jan.chou.wu@gmail.com>
Closes#14008 from janplus/SPARK-16281.
