### What changes were proposed in this pull request?
So far, the test cases in DDLSuites only verify the behaviors of InMemoryCatalog. That means, they do not cover the scenarios using HiveExternalCatalog. Thus, we need to improve the existing test suite to run these cases using Hive metastore.
When porting these test cases, a bug of `SET LOCATION` is found. `path` is not set when the location is changed.
After this PR, a few changes are made, as summarized below,
- `DDLSuite` becomes an abstract class. Both `InMemoryCatalogedDDLSuite` and `HiveCatalogedDDLSuite` extend it. `InMemoryCatalogedDDLSuite` is using `InMemoryCatalog`. `HiveCatalogedDDLSuite` is using `HiveExternalCatalog`.
- `InMemoryCatalogedDDLSuite` contains all the existing test cases in `DDLSuite`.
- `HiveCatalogedDDLSuite` contains a subset of `DDLSuite`. The following test cases are excluded:
1. The following test cases only make sense for `InMemoryCatalog`:
```
test("desc table for parquet data source table using in-memory catalog")
test("create a managed Hive source table") {
test("create an external Hive source table")
test("Create Hive Table As Select")
```
2. The following test cases are unable to be ported because we are unable to alter table provider when using Hive metastore. In the future PRs we need to improve the test cases so that altering table provider is not needed:
```
test("alter table: set location (datasource table)")
test("alter table: set properties (datasource table)")
test("alter table: unset properties (datasource table)")
test("alter table: set serde (datasource table)")
test("alter table: set serde partition (datasource table)")
test("alter table: change column (datasource table)")
test("alter table: add partition (datasource table)")
test("alter table: drop partition (datasource table)")
test("alter table: rename partition (datasource table)")
test("drop table - data source table")
```
**TODO** : in the future PRs, we need to remove `HiveDDLSuite` and move the test cases to either `DDLSuite`, `InMemoryCatalogedDDLSuite` or `HiveCatalogedDDLSuite`.
### How was this patch tested?
N/A
Author: Xiao Li <gatorsmile@gmail.com>
Author: gatorsmile <gatorsmile@gmail.com>
Closes#16592 from gatorsmile/refactorDDLSuite.
## What changes were proposed in this pull request?
In general we have a checkAnalysis phase which validates the logical plan and throws AnalysisException on semantic errors. However we also can throw AnalysisException from a few analyzer rules like ResolveSubquery.
I found that we fire up the analyzer rules twice for the queries that throw AnalysisException from one of the analyzer rules. This is a very minor fix. We don't have to strictly fix it. I just got confused seeing the rule getting fired two times when i was not expecting it.
## How was this patch tested?
Tested manually.
Author: Dilip Biswal <dbiswal@us.ibm.com>
Closes#17214 from dilipbiswal/analyis_twice.
## What changes were proposed in this pull request?
**The Problem**
There is a file stream source option called maxFileAge which limits how old the files can be, relative the latest file that has been seen. This is used to limit the files that need to be remembered as "processed". Files older than the latest processed files are ignored. This values is by default 7 days.
This causes a problem when both
latestFirst = true
maxFilesPerTrigger > total files to be processed.
Here is what happens in all combinations
1) latestFirst = false - Since files are processed in order, there wont be any unprocessed file older than the latest processed file. All files will be processed.
2) latestFirst = true AND maxFilesPerTrigger is not set - The maxFileAge thresholding mechanism takes one batch initialize. If maxFilesPerTrigger is not, then all old files get processed in the first batch, and so no file is left behind.
3) latestFirst = true AND maxFilesPerTrigger is set to X - The first batch process the latest X files. That sets the threshold latest file - maxFileAge, so files older than this threshold will never be considered for processing.
The bug is with case 3.
**The Solution**
Ignore `maxFileAge` when both `maxFilesPerTrigger` and `latestFirst` are set.
## How was this patch tested?
Regression test in `FileStreamSourceSuite`
Author: Burak Yavuz <brkyvz@gmail.com>
Closes#17153 from brkyvz/maxFileAge.
## What changes were proposed in this pull request?
This PR proposes to add an API that loads `DataFrame` from `Dataset[String]` storing csv.
It allows pre-processing before loading into CSV, which means allowing a lot of workarounds for many narrow cases, for example, as below:
- Case 1 - pre-processing
```scala
val df = spark.read.text("...")
// Pre-processing with this.
spark.read.csv(df.as[String])
```
- Case 2 - use other input formats
```scala
val rdd = spark.sparkContext.newAPIHadoopFile("/file.csv.lzo",
classOf[com.hadoop.mapreduce.LzoTextInputFormat],
classOf[org.apache.hadoop.io.LongWritable],
classOf[org.apache.hadoop.io.Text])
val stringRdd = rdd.map(pair => new String(pair._2.getBytes, 0, pair._2.getLength))
spark.read.csv(stringRdd.toDS)
```
## How was this patch tested?
Added tests in `CSVSuite` and build with Scala 2.10.
```
./dev/change-scala-version.sh 2.10
./build/mvn -Pyarn -Phadoop-2.4 -Dscala-2.10 -DskipTests clean package
```
Author: hyukjinkwon <gurwls223@gmail.com>
Closes#16854 from HyukjinKwon/SPARK-15463.
Forking a newSession() from SparkSession currently makes a new SparkSession that does not retain SessionState (i.e. temporary tables, SQL config, registered functions etc.) This change adds a method cloneSession() which creates a new SparkSession with a copy of the parent's SessionState.
Subsequent changes to base session are not propagated to cloned session, clone is independent after creation.
If the base is changed after clone has been created, say user registers new UDF, then the new UDF will not be available inside the clone. Same goes for configs and temp tables.
Unit tests
Author: Kunal Khamar <kkhamar@outlook.com>
Author: Shixiong Zhu <shixiong@databricks.com>
Closes#16826 from kunalkhamar/fork-sparksession.
## What changes were proposed in this pull request?
Add a output mode parameter to `flatMapGroupsWithState` and just define `mapGroupsWithState` as `flatMapGroupsWithState(Update)`.
`UnsupportedOperationChecker` is modified to disallow unsupported cases.
- Batch mapGroupsWithState or flatMapGroupsWithState is always allowed.
- For streaming (map/flatMap)GroupsWithState, see the following table:
| Operators | Supported Query Output Mode |
| ------------- | ------------- |
| flatMapGroupsWithState(Update) without aggregation | Update |
| flatMapGroupsWithState(Update) with aggregation | None |
| flatMapGroupsWithState(Append) without aggregation | Append |
| flatMapGroupsWithState(Append) before aggregation | Append, Update, Complete |
| flatMapGroupsWithState(Append) after aggregation | None |
| Multiple flatMapGroupsWithState(Append)s | Append |
| Multiple mapGroupsWithStates | None |
| Mxing mapGroupsWithStates and flatMapGroupsWithStates | None |
| Other cases of multiple flatMapGroupsWithState | None |
## How was this patch tested?
The added unit tests. Here are the tests related to (map/flatMap)GroupsWithState:
```
[info] - batch plan - flatMapGroupsWithState - flatMapGroupsWithState(Append) on batch relation: supported (1 millisecond)
[info] - batch plan - flatMapGroupsWithState - multiple flatMapGroupsWithState(Append)s on batch relation: supported (0 milliseconds)
[info] - batch plan - flatMapGroupsWithState - flatMapGroupsWithState(Update) on batch relation: supported (0 milliseconds)
[info] - batch plan - flatMapGroupsWithState - multiple flatMapGroupsWithState(Update)s on batch relation: supported (0 milliseconds)
[info] - streaming plan - flatMapGroupsWithState - flatMapGroupsWithState(Update) on streaming relation without aggregation in update mode: supported (2 milliseconds)
[info] - streaming plan - flatMapGroupsWithState - flatMapGroupsWithState(Update) on streaming relation without aggregation in append mode: not supported (7 milliseconds)
[info] - streaming plan - flatMapGroupsWithState - flatMapGroupsWithState(Update) on streaming relation without aggregation in complete mode: not supported (5 milliseconds)
[info] - streaming plan - flatMapGroupsWithState - flatMapGroupsWithState(Update) on streaming relation with aggregation in Append mode: not supported (11 milliseconds)
[info] - streaming plan - flatMapGroupsWithState - flatMapGroupsWithState(Update) on streaming relation with aggregation in Update mode: not supported (5 milliseconds)
[info] - streaming plan - flatMapGroupsWithState - flatMapGroupsWithState(Update) on streaming relation with aggregation in Complete mode: not supported (5 milliseconds)
[info] - streaming plan - flatMapGroupsWithState - flatMapGroupsWithState(Append) on streaming relation without aggregation in append mode: supported (1 millisecond)
[info] - streaming plan - flatMapGroupsWithState - flatMapGroupsWithState(Append) on streaming relation without aggregation in update mode: not supported (6 milliseconds)
[info] - streaming plan - flatMapGroupsWithState - flatMapGroupsWithState(Append) on streaming relation before aggregation in Append mode: supported (1 millisecond)
[info] - streaming plan - flatMapGroupsWithState - flatMapGroupsWithState(Append) on streaming relation before aggregation in Update mode: supported (0 milliseconds)
[info] - streaming plan - flatMapGroupsWithState - flatMapGroupsWithState(Append) on streaming relation before aggregation in Complete mode: supported (1 millisecond)
[info] - streaming plan - flatMapGroupsWithState - flatMapGroupsWithState(Append) on streaming relation after aggregation in Append mode: not supported (6 milliseconds)
[info] - streaming plan - flatMapGroupsWithState - flatMapGroupsWithState(Append) on streaming relation after aggregation in Update mode: not supported (4 milliseconds)
[info] - streaming plan - flatMapGroupsWithState - flatMapGroupsWithState(Update) on streaming relation in complete mode: not supported (2 milliseconds)
[info] - streaming plan - flatMapGroupsWithState - flatMapGroupsWithState(Append) on batch relation inside streaming relation in Append output mode: supported (1 millisecond)
[info] - streaming plan - flatMapGroupsWithState - flatMapGroupsWithState(Append) on batch relation inside streaming relation in Update output mode: supported (1 millisecond)
[info] - streaming plan - flatMapGroupsWithState - flatMapGroupsWithState(Update) on batch relation inside streaming relation in Append output mode: supported (0 milliseconds)
[info] - streaming plan - flatMapGroupsWithState - flatMapGroupsWithState(Update) on batch relation inside streaming relation in Update output mode: supported (0 milliseconds)
[info] - streaming plan - flatMapGroupsWithState - multiple flatMapGroupsWithStates on streaming relation and all are in append mode: supported (2 milliseconds)
[info] - streaming plan - flatMapGroupsWithState - multiple flatMapGroupsWithStates on s streaming relation but some are not in append mode: not supported (7 milliseconds)
[info] - streaming plan - mapGroupsWithState - mapGroupsWithState on streaming relation without aggregation in append mode: not supported (3 milliseconds)
[info] - streaming plan - mapGroupsWithState - mapGroupsWithState on streaming relation without aggregation in complete mode: not supported (3 milliseconds)
[info] - streaming plan - mapGroupsWithState - mapGroupsWithState on streaming relation with aggregation in Append mode: not supported (6 milliseconds)
[info] - streaming plan - mapGroupsWithState - mapGroupsWithState on streaming relation with aggregation in Update mode: not supported (3 milliseconds)
[info] - streaming plan - mapGroupsWithState - mapGroupsWithState on streaming relation with aggregation in Complete mode: not supported (4 milliseconds)
[info] - streaming plan - mapGroupsWithState - multiple mapGroupsWithStates on streaming relation and all are in append mode: not supported (4 milliseconds)
[info] - streaming plan - mapGroupsWithState - mixing mapGroupsWithStates and flatMapGroupsWithStates on streaming relation: not supported (4 milliseconds)
```
Author: Shixiong Zhu <shixiong@databricks.com>
Closes#17197 from zsxwing/mapgroups-check.
## What changes were proposed in this pull request?
Fix for SQL round function that modifies original column when underlying data frame is created from a local product.
import org.apache.spark.sql.functions._
case class NumericRow(value: BigDecimal)
val df = spark.createDataFrame(Seq(NumericRow(BigDecimal("1.23456789"))))
df.show()
+--------------------+
| value|
+--------------------+
|1.234567890000000000|
+--------------------+
df.withColumn("value_rounded", round('value)).show()
// before
+--------------------+-------------+
| value|value_rounded|
+--------------------+-------------+
|1.000000000000000000| 1|
+--------------------+-------------+
// after
+--------------------+-------------+
| value|value_rounded|
+--------------------+-------------+
|1.234567890000000000| 1|
+--------------------+-------------+
## How was this patch tested?
New unit test added to existing suite `org.apache.spark.sql.MathFunctionsSuite`
Author: Wojtek Szymanski <wk.szymanski@gmail.com>
Closes#17075 from wojtek-szymanski/SPARK-19727.
## What changes were proposed in this pull request?
Currently there are lots of places to make the path qualified, it is better to provide a function to do this, then the code will be more simple.
## How was this patch tested?
N/A
Author: windpiger <songjun@outlook.com>
Closes#17204 from windpiger/addQualifiledPathUtil.
## What changes were proposed in this pull request?
This is as per suggestion by rxin at : https://github.com/apache/spark/pull/17184#discussion_r104841735
## How was this patch tested?
NA as this is a documentation change
Author: Tejas Patil <tejasp@fb.com>
Closes#17205 from tejasapatil/SPARK-19843_followup.
### What changes were proposed in this pull request?
Observed by felixcheung in https://github.com/apache/spark/pull/16739, when users use the shuffle-enabled `repartition` API, they expect the partition they got should be the exact number they provided, even if they call shuffle-disabled `coalesce` later.
Currently, `CollapseRepartition` rule does not consider whether shuffle is enabled or not. Thus, we got the following unexpected result.
```Scala
val df = spark.range(0, 10000, 1, 5)
val df2 = df.repartition(10)
assert(df2.coalesce(13).rdd.getNumPartitions == 5)
assert(df2.coalesce(7).rdd.getNumPartitions == 5)
assert(df2.coalesce(3).rdd.getNumPartitions == 3)
```
This PR is to fix the issue. We preserve shuffle-enabled Repartition.
### How was this patch tested?
Added a test case
Author: Xiao Li <gatorsmile@gmail.com>
Closes#16933 from gatorsmile/CollapseRepartition.
## What changes were proposed in this pull request?
Since we have a `View` node now, we can remove the view identifier in `SubqueryAlias`, which was used to indicate a view node before.
## How was this patch tested?
Update the related test cases.
Author: jiangxingbo <jiangxb1987@gmail.com>
Closes#17210 from jiangxb1987/SubqueryAlias.
## What changes were proposed in this pull request?
Reorder the joins using a dynamic programming algorithm (Selinger paper):
First we put all items (basic joined nodes) into level 1, then we build all two-way joins at level 2 from plans at level 1 (single items), then build all 3-way joins from plans at previous levels (two-way joins and single items), then 4-way joins ... etc, until we build all n-way joins and pick the best plan among them.
When building m-way joins, we only keep the best plan (with the lowest cost) for the same set of m items. E.g., for 3-way joins, we keep only the best plan for items {A, B, C} among plans (A J B) J C, (A J C) J B and (B J C) J A. Thus, the plans maintained for each level when reordering four items A, B, C, D are as follows:
```
level 1: p({A}), p({B}), p({C}), p({D})
level 2: p({A, B}), p({A, C}), p({A, D}), p({B, C}), p({B, D}), p({C, D})
level 3: p({A, B, C}), p({A, B, D}), p({A, C, D}), p({B, C, D})
level 4: p({A, B, C, D})
```
where p({A, B, C, D}) is the final output plan.
For cost evaluation, since physical costs for operators are not available currently, we use cardinalities and sizes to compute costs.
## How was this patch tested?
add test cases
Author: wangzhenhua <wangzhenhua@huawei.com>
Author: Zhenhua Wang <wzh_zju@163.com>
Closes#17138 from wzhfy/joinReorder.
## What changes were proposed in this pull request?
Ensure broadcasted variable are destroyed even in case of exception
## How was this patch tested?
Word2VecSuite was run locally
Author: Anthony Truchet <a.truchet@criteo.com>
Closes#14299 from AnthonyTruchet/SPARK-16440.
## What changes were proposed in this pull request?
Make the `SET mapreduce.job.reduces` automatically converted to `spark.sql.shuffle.partitions`, it's similar to `SET mapred.reduce.tasks`.
## How was this patch tested?
unit tests
Author: Yuming Wang <wgyumg@gmail.com>
Closes#17020 from wangyum/SPARK-19693.
## What changes were proposed in this pull request?
PySpark ```GeneralizedLinearRegression``` supports tweedie distribution.
## How was this patch tested?
Add unit tests.
Author: Yanbo Liang <ybliang8@gmail.com>
Closes#17146 from yanboliang/spark-19806.
## What changes were proposed in this pull request?
Since we allow ```Estimator``` and ```Model``` not always share same params (see ```ALSParams``` and ```ALSModelParams```), we should pass in test params for estimator and model separately in function ```testEstimatorAndModelReadWrite```.
## How was this patch tested?
Existing tests.
Author: Yanbo Liang <ybliang8@gmail.com>
Closes#17151 from yanboliang/test-rw.
Previously, we were using the mirror of passed in `TypeTag` when reflecting to build an encoder. This fails when the outer class is built in (i.e. `Seq`'s default mirror is based on root classloader) but inner classes (i.e. `A` in `Seq[A]`) are defined in the REPL or a library.
This patch changes us to always reflect based on a mirror created using the context classloader.
Author: Michael Armbrust <michael@databricks.com>
Closes#17201 from marmbrus/replSeqEncoder.
## What changes were proposed in this pull request?
provide methods to return synonyms directly, without wrapping them in a dataframe
In performance sensitive applications (such as user facing apis) the roundtrip to and from dataframes is costly and unnecessary
The methods are named ``findSynonymsArray`` to make the return type clear, which also implies a local datastructure
## How was this patch tested?
updated word2vec tests
Author: Asher Krim <akrim@hubspot.com>
Closes#16811 from Krimit/w2vFindSynonymsLocal.
## What changes were proposed in this pull request?
The new watermark should override the old one. Otherwise, we just pick up the first column which has a watermark, it may be unexpected.
## How was this patch tested?
The new test.
Author: Shixiong Zhu <shixiong@databricks.com>
Closes#17199 from zsxwing/SPARK-19859.
## What changes were proposed in this pull request?
`StreamingDeduplicateExec.watermarkPredicate` should filter based on keys. Otherwise, it may generate a wrong answer if the watermark column in `keyExpression` has a different position in the row.
`StateStoreSaveExec` has the same codes but its parent can makes sure the watermark column positions in `keyExpression` and `row` are the same.
## How was this patch tested?
The added test.
Author: Shixiong Zhu <shixiong@databricks.com>
Closes#17183 from zsxwing/SPARK-19841.
## What changes were proposed in this pull request?
Disallow cyclic view references, a cyclic view reference may be created by the following queries:
```
CREATE VIEW testView AS SELECT id FROM tbl
CREATE VIEW testView2 AS SELECT id FROM testView
ALTER VIEW testView AS SELECT * FROM testView2
```
In the above example, a reference cycle (testView -> testView2 -> testView) exsits.
We disallow cyclic view references by checking that in ALTER VIEW command, when the `analyzedPlan` contains the same `View` node with the altered view, we should prevent the behavior and throw an AnalysisException.
## How was this patch tested?
Test by `SQLViewSuite.test("correctly handle a cyclic view reference")`.
Author: jiangxingbo <jiangxb1987@gmail.com>
Closes#17152 from jiangxb1987/cyclic-view.
## What changes were proposed in this pull request?
Jira : https://issues.apache.org/jira/browse/SPARK-19843
Created wrapper classes (`IntWrapper`, `LongWrapper`) to wrap the result of parsing (which are primitive types). In case of problem in parsing, the method would return a boolean.
## How was this patch tested?
- Added new unit tests
- Ran a prod job which had conversion from string -> int and verified the outputs
## Performance
Tiny regression when all strings are valid integers
```
conversion to int: Best/Avg Time(ms) Rate(M/s) Per Row(ns) Relative
--------------------------------------------------------------------------------
trunk 502 / 522 33.4 29.9 1.0X
SPARK-19843 493 / 503 34.0 29.4 1.0X
```
Huge gain when all strings are invalid integers
```
conversion to int: Best/Avg Time(ms) Rate(M/s) Per Row(ns) Relative
-------------------------------------------------------------------------------
trunk 33913 / 34219 0.5 2021.4 1.0X
SPARK-19843 154 / 162 108.8 9.2 220.0X
```
Author: Tejas Patil <tejasp@fb.com>
Closes#17184 from tejasapatil/SPARK-19843_is_numeric_maybe.
Add parentheses so that both lines form a single statement; also add
a log message so that the issue becomes more explicit if it shows up
again.
Tested manually with integration test that exercises the feature.
Author: Marcelo Vanzin <vanzin@cloudera.com>
Closes#17198 from vanzin/SPARK-19857.
## What changes were proposed in this pull request?
Increase default refuse_seconds timeout, and make it configurable. See JIRA for details on how this reduces the risk of starvation.
## How was this patch tested?
Unit tests, Manual testing, and Mesos/Spark integration test suite
cc susanxhuynh skonto jmlvanre
Author: Michael Gummelt <mgummelt@mesosphere.io>
Closes#17031 from mgummelt/SPARK-19702-suppress-revive.
## What changes were proposed in this pull request?
Cast the output of `TimestampType.toInternal` to long to allow for proper Timestamp creation in DataFrames near the epoch.
## How was this patch tested?
Added a new test that fails without the change.
dongjoon-hyun davies Mind taking a look?
The contribution is my original work and I license the work to the project under the project’s open source license.
Author: Jason White <jason.white@shopify.com>
Closes#16896 from JasonMWhite/SPARK-19561.
## What changes were proposed in this pull request?
200ms may be too short. Give more time for replication to happen and new block be reported to master
## How was this patch tested?
test manully
Author: uncleGen <hustyugm@gmail.com>
Author: dylon <hustyugm@gmail.com>
Closes#17144 from uncleGen/SPARK-19803.
## What changes were proposed in this pull request?
After Spark 2.0, `SparkSession` becomes the new entry point for Spark applications. We should update the public documents to reflect this.
## How was this patch tested?
N/A
Author: Wenchen Fan <wenchen@databricks.com>
Closes#16856 from cloud-fan/doc.
## What changes were proposed in this pull request?
This PR is an enhancement to ML StringIndexer.
Before this PR, String Indexer only supports "skip"/"error" options to deal with unseen records.
But those unseen records might still be useful and user would like to keep the unseen labels in
certain use cases, This PR enables StringIndexer to support keeping unseen labels as
indices [numLabels].
'''Before
StringIndexer().setHandleInvalid("skip")
StringIndexer().setHandleInvalid("error")
'''After
support the third option "keep"
StringIndexer().setHandleInvalid("keep")
## How was this patch tested?
Test added in StringIndexerSuite
Signed-off-by: VinceShieh <vincent.xieintel.com>
(Please fill in changes proposed in this fix)
Author: VinceShieh <vincent.xie@intel.com>
Closes#16883 from VinceShieh/spark-17498.
## What changes were proposed in this pull request?
When un-cache a table, we should not only remove the cache entry for this table, but also un-cache any other cached plans that refer to this table.
This PR also includes some refactors:
1. use `java.util.LinkedList` to store the cache entries, so that it's safer to remove elements while iterating
2. rename `invalidateCache` to `recacheByPlan`, which is more obvious about what it does.
## How was this patch tested?
new regression test
Author: Wenchen Fan <wenchen@databricks.com>
Closes#17097 from cloud-fan/cache.
## What changes were proposed in this pull request?
This pr added entries in `FunctionRegistry` and supported `to_json` in SQL.
## How was this patch tested?
Added tests in `JsonFunctionsSuite`.
Author: Takeshi Yamamuro <yamamuro@apache.org>
Closes#16981 from maropu/SPARK-19637.
## What changes were proposed in this pull request?
1. support boolean type in binary expression estimation.
2. deal with compound Not conditions.
3. avoid convert BigInt/BigDecimal directly to double unless it's within range (0, 1).
4. reorganize test code.
## How was this patch tested?
modify related test cases.
Author: wangzhenhua <wangzhenhua@huawei.com>
Author: Zhenhua Wang <wzh_zju@163.com>
Closes#17148 from wzhfy/fixFilter.
## What changes were proposed in this pull request?
Currently in DynamicPartitionWriteTask, when we get the paritionPath of a parition, we just escape the partition value, not escape the partition name.
this will cause some problems for some special partition name situation, for example :
1) if the partition name contains '%' etc, there will be two partition path created in the filesytem, one is for escaped path like '/path/a%25b=1', another is for unescaped path like '/path/a%b=1'.
and the data inserted stored in unescaped path, while the show partitions table will return 'a%25b=1' which the partition name is escaped. So here it is not consist. And I think the data should be stored in the escaped path in filesystem, which Hive2.0.0 also have the same action.
2) if the partition name contains ':', there will throw exception that new Path("/path","a:b"), this is illegal which has a colon in the relative path.
```
java.lang.IllegalArgumentException: java.net.URISyntaxException: Relative path in absolute URI: a:b
at org.apache.hadoop.fs.Path.initialize(Path.java:205)
at org.apache.hadoop.fs.Path.<init>(Path.java:171)
at org.apache.hadoop.fs.Path.<init>(Path.java:88)
... 48 elided
Caused by: java.net.URISyntaxException: Relative path in absolute URI: a:b
at java.net.URI.checkPath(URI.java:1823)
at java.net.URI.<init>(URI.java:745)
at org.apache.hadoop.fs.Path.initialize(Path.java:202)
... 50 more
```
## How was this patch tested?
unit test added
Author: windpiger <songjun@outlook.com>
Closes#17173 from windpiger/fixDatasourceSpecialCharPartitionName.
## What changes were proposed in this pull request?
Added checks for name consistency of input data frames in union.
## How was this patch tested?
new test.
Author: actuaryzhang <actuaryzhang10@gmail.com>
Closes#17159 from actuaryzhang/sparkRUnion.
## What changes were proposed in this pull request?
Before this pr, LocalLimit/GlobalLimit/Sample propagates the same row count and column stats from its child, which is incorrect.
We can get the correct rowCount in Statistics for GlobalLimit/Sample whether cbo is enabled or not.
We don't know the rowCount for LocalLimit because we don't know the partition number at that time. Column stats should not be propagated because we don't know the distribution of columns after Limit or Sample.
## How was this patch tested?
Added test cases.
Author: wangzhenhua <wangzhenhua@huawei.com>
Closes#16696 from wzhfy/limitEstimation.
## What changes were proposed in this pull request?
Add a new Kafka Sink and Kafka Relation for writing streaming and batch queries, respectively, to Apache Kafka.
### Streaming Kafka Sink
- When addBatch is called
-- If batchId is great than the last written batch
--- Write batch to Kafka
---- Topic will be taken from the record, if present, or from a topic option, which overrides topic in record.
-- Else ignore
### Batch Kafka Sink
- KafkaSourceProvider will implement CreatableRelationProvider
- CreatableRelationProvider#createRelation will write the passed in Dataframe to a Kafka
- Topic will be taken from the record, if present, or from topic option, which overrides topic in record.
- Save modes Append and ErrorIfExist supported under identical semantics. Other save modes result in an AnalysisException
tdas zsxwing
## How was this patch tested?
### The following unit tests will be included
- write to stream with topic field: valid stream write with data that includes an existing topic in the schema
- write structured streaming aggregation w/o topic field, with default topic: valid stream write with data that does not include a topic field, but the configuration includes a default topic
- write data with bad schema: various cases of writing data that does not conform to a proper schema e.g., 1. no topic field or default topic, and 2. no value field
- write data with valid schema but wrong types: data with a complete schema but wrong types e.g., key and value types are integers.
- write to non-existing topic: write a stream to a topic that does not exist in Kafka, which has been configured to not auto-create topics.
- write batch to kafka: simple write batch to Kafka, which goes through the same code path as streaming scenario, so validity checks will not be redone here.
### Examples
```scala
// Structured Streaming
val writer = inputStringStream.map(s => s.get(0).toString.getBytes()).toDF("value")
.selectExpr("value as key", "value as value")
.writeStream
.format("kafka")
.option("checkpointLocation", checkpointDir)
.outputMode(OutputMode.Append)
.option("kafka.bootstrap.servers", brokerAddress)
.option("topic", topic)
.queryName("kafkaStream")
.start()
// Batch
val df = spark
.sparkContext
.parallelize(Seq("1", "2", "3", "4", "5"))
.map(v => (topic, v))
.toDF("topic", "value")
df.write
.format("kafka")
.option("kafka.bootstrap.servers",brokerAddress)
.option("topic", topic)
.save()
```
Please review http://spark.apache.org/contributing.html before opening a pull request.
Author: Tyson Condie <tcondie@gmail.com>
Closes#17043 from tcondie/kafka-writer.
## What changes were proposed in this pull request?
Bugfix for reading empty file with CSV data source. Instead of throwing `NoSuchElementException`, an empty data frame is returned.
## How was this patch tested?
Added new unit test in `org.apache.spark.sql.execution.datasources.csv.CSVSuite`
Author: Wojtek Szymanski <wk.szymanski@gmail.com>
Closes#17068 from wojtek-szymanski/SPARK-19709.
## What changes were proposed in this pull request?
Add unit tests for testing SparseVector.
We can't add mixed DenseVector and SparseVector test case, as discussed in JIRA 19382.
def merge(other: MultivariateOnlineSummarizer): this.type = {
if (this.totalWeightSum != 0.0 && other.totalWeightSum != 0.0) {
require(n == other.n, s"Dimensions mismatch when merging with another summarizer. " +
s"Expecting $n but got $
{other.n}
.")
## How was this patch tested?
Unit tests
Author: wm624@hotmail.com <wm624@hotmail.com>
Author: Miao Wang <wangmiao1981@users.noreply.github.com>
Closes#16784 from wangmiao1981/bk.
## What changes were proposed in this pull request?
Currently we don't explicitly forbid the following behaviors:
1. The statement CREATE VIEW AS INSERT INTO throws the following exception:
```
scala> spark.sql("CREATE VIEW testView AS INSERT INTO tab VALUES (1, \"a\")")
org.apache.spark.sql.AnalysisException: org.apache.hadoop.hive.ql.metadata.HiveException: org.apache.hadoop.hive.ql.metadata.HiveException: at least one column must be specified for the table;
scala> spark.sql("CREATE VIEW testView(a, b) AS INSERT INTO tab VALUES (1, \"a\")")
org.apache.spark.sql.AnalysisException: The number of columns produced by the SELECT clause (num: `0`) does not match the number of column names specified by CREATE VIEW (num: `2`).;
```
2. The statement INSERT INTO view VALUES throws the following exception from checkAnalysis:
```
scala> spark.sql("INSERT INTO testView VALUES (1, \"a\")")
org.apache.spark.sql.AnalysisException: Inserting into an RDD-based table is not allowed.;;
'InsertIntoTable View (`default`.`testView`, [a#16,b#17]), false, false
+- LocalRelation [col1#14, col2#15]
```
After this PR, the behavior changes to:
```
scala> spark.sql("CREATE VIEW testView AS INSERT INTO tab VALUES (1, \"a\")")
org.apache.spark.sql.catalyst.parser.ParseException: Operation not allowed: CREATE VIEW ... AS INSERT INTO;
scala> spark.sql("CREATE VIEW testView(a, b) AS INSERT INTO tab VALUES (1, \"a\")")
org.apache.spark.sql.catalyst.parser.ParseException: Operation not allowed: CREATE VIEW ... AS INSERT INTO;
scala> spark.sql("INSERT INTO testView VALUES (1, \"a\")")
org.apache.spark.sql.AnalysisException: `default`.`testView` is a view, inserting into a view is not allowed;
```
## How was this patch tested?
Add a new test case in `SparkSqlParserSuite`;
Update the corresponding test case in `SQLViewSuite`.
Author: jiangxingbo <jiangxb1987@gmail.com>
Closes#17125 from jiangxb1987/insert-with-view.
## What changes were proposed in this pull request?
The properties that are serialized with a TaskDescription can have very long values (eg. "spark.job.description" which is set to the full sql statement with the thrift-server). DataOutputStream.writeUTF() does not work well for long strings, so this changes the way those values are serialized to handle longer strings.
## How was this patch tested?
Updated existing unit test to reproduce the issue. All unit tests via jenkins.
Author: Imran Rashid <irashid@cloudera.com>
Closes#17140 from squito/SPARK-19796.
## What changes were proposed in this pull request?
Currently we treat the location of table/partition/database as URI string.
It will be safer if we can make the type of location as java.net.URI.
In this PR, there are following classes changes:
**1. CatalogDatabase**
```
case class CatalogDatabase(
name: String,
description: String,
locationUri: String,
properties: Map[String, String])
--->
case class CatalogDatabase(
name: String,
description: String,
locationUri: URI,
properties: Map[String, String])
```
**2. CatalogStorageFormat**
```
case class CatalogStorageFormat(
locationUri: Option[String],
inputFormat: Option[String],
outputFormat: Option[String],
serde: Option[String],
compressed: Boolean,
properties: Map[String, String])
---->
case class CatalogStorageFormat(
locationUri: Option[URI],
inputFormat: Option[String],
outputFormat: Option[String],
serde: Option[String],
compressed: Boolean,
properties: Map[String, String])
```
Before and After this PR, it is transparent for user, there is no change that the user should concern. The `String` to `URI` just happened in SparkSQL internally.
Here list some operation related location:
**1. whitespace in the location**
e.g. `/a/b c/d`
For both table location and partition location,
After `CREATE TABLE t... (PARTITIONED BY ...) LOCATION '/a/b c/d'` ,
then `DESC EXTENDED t ` show the location is `/a/b c/d`,
and the real path in the FileSystem also show `/a/b c/d`
**2. colon(:) in the location**
e.g. `/a/b:c/d`
For both table location and partition location,
when `CREATE TABLE t... (PARTITIONED BY ...) LOCATION '/a/b:c/d'` ,
**In linux file system**
`DESC EXTENDED t ` show the location is `/a/b:c/d`,
and the real path in the FileSystem also show `/a/b:c/d`
**in HDFS** throw exception:
`java.lang.IllegalArgumentException: Pathname /a/b:c/d from hdfs://iZbp1151s8hbnnwriekxdeZ:9000/a/b:c/d is not a valid DFS filename.`
**while** After `INSERT INTO TABLE t PARTITION(a="a:b") SELECT 1`
then `DESC EXTENDED t ` show the location is `/xxx/a=a%3Ab`,
and the real path in the FileSystem also show `/xxx/a=a%3Ab`
**3. percent sign(%) in the location**
e.g. `/a/b%c/d`
For both table location and partition location,
After `CREATE TABLE t... (PARTITIONED BY ...) LOCATION '/a/b%c/d'` ,
then `DESC EXTENDED t ` show the location is `/a/b%c/d`,
and the real path in the FileSystem also show `/a/b%c/d`
**4. encoded(%25) in the location**
e.g. `/a/b%25c/d`
For both table location and partition location,
After `CREATE TABLE t... (PARTITIONED BY ...) LOCATION '/a/b%25c/d'` ,
then `DESC EXTENDED t ` show the location is `/a/b%25c/d`,
and the real path in the FileSystem also show `/a/b%25c/d`
**while** After `INSERT INTO TABLE t PARTITION(a="%25") SELECT 1`
then `DESC EXTENDED t ` show the location is `/xxx/a=%2525`,
and the real path in the FileSystem also show `/xxx/a=%2525`
**Additionally**, except the location, there are two other factors will affect the location of the table/partition. one is the table name which does not allowed to have special characters, and the other is `partition name` which have the same actions with `partition value`, and `partition name` with special character situation has add some testcase and resolve a bug in [PR](https://github.com/apache/spark/pull/17173)
### Summary:
After `CREATE TABLE t... (PARTITIONED BY ...) LOCATION path`,
the path which we get from `DESC TABLE` and `real path in FileSystem` are all the same with the `CREATE TABLE` command(different filesystem has different action that allow what kind of special character to create the path, e.g. HDFS does not allow colon, but linux filesystem allow it ).
`DataBase` also have the same logic with `CREATE TABLE`
while if the `partition value` has some special character like `%` `:` `#` etc, then we will get the path with encoded `partition value` like `/xxx/a=A%25B` from `DESC TABLE` and `real path in FileSystem`
In this PR, the core change code is using `new Path(str).toUri` and `new Path(uri).toString`
which transfrom `str to uri `or `uri to str`.
for example:
```
val str = '/a/b c/d'
val uri = new Path(str).toUri --> '/a/b%20c/d'
val strFromUri = new Path(uri).toString -> '/a/b c/d'
```
when we restore table/partition from metastore, or get the location from `CREATE TABLE` command, we can use it as above to change string to uri `new Path(str).toUri `
## How was this patch tested?
unit test added.
The `current master branch` also `passed all the test cases` added in this PR by a litter change.
https://github.com/apache/spark/pull/17149/files#diff-b7094baa12601424a5d19cb930e3402fR1764
here `toURI` -> `toString` when test in master branch.
This can show that this PR is transparent for user.
Author: windpiger <songjun@outlook.com>
Closes#17149 from windpiger/changeStringToURI.
## What changes were proposed in this pull request?
added a limit to getRecords api call call in KinesisBackedBlockRdd. This helps reduce the amount of data returned by kinesis api call making the recovery considerably faster
As we are storing the `fromSeqNum` & `toSeqNum` in checkpoint metadata, we can also store the number of records. Which can later be used for api call.
## How was this patch tested?
The patch was manually tested
Apologies for any silly mistakes, opening first pull request
Author: Gaurav <gaurav@techtinium.com>
Closes#16842 from Gauravshah/kinesis_checkpoint_recovery_fix_2_1_0.
## What changes were proposed in this pull request?
This PR adds a new `Once` analysis rule batch consists of a single analysis rule `LookupFunctions` that performs simple existence check over `UnresolvedFunctions` without actually resolving them.
The benefit of this rule is that it doesn't require function arguments to be resolved first and therefore doesn't rely on relation resolution, which may incur potentially expensive partition/schema discovery cost.
Please refer to [SPARK-19737][1] for more details about the motivation.
## How was this patch tested?
New test case added in `AnalysisErrorSuite`.
[1]: https://issues.apache.org/jira/browse/SPARK-19737
Author: Cheng Lian <lian@databricks.com>
Closes#17168 from liancheng/spark-19737-lookup-functions.
## What changes were proposed in this pull request?
Hive hash to support Decimal datatype. [Hive internally normalises decimals](4ba713ccd8/storage-api/src/java/org/apache/hadoop/hive/common/type/HiveDecimalV1.java (L307)) and I have ported that logic as-is to HiveHash.
## How was this patch tested?
Added unit tests
Author: Tejas Patil <tejasp@fb.com>
Closes#17056 from tejasapatil/SPARK-17495_decimal.
## What changes were proposed in this pull request?
https://amplab.cs.berkeley.edu/jenkins/job/SparkPullRequestBuilder/73800/testReport/
```
sbt.ForkMain$ForkError: org.scalatest.exceptions.TestFailedDueToTimeoutException: The code
passed to eventually never returned normally. Attempted 617 times over 10.003740484 seconds.
Last failure message: 8 did not equal 2.
at org.scalatest.concurrent.Eventually$class.tryTryAgain$1(Eventually.scala:420)
at org.scalatest.concurrent.Eventually$class.eventually(Eventually.scala:438)
at org.scalatest.concurrent.Eventually$.eventually(Eventually.scala:478)
at org.scalatest.concurrent.Eventually$class.eventually(Eventually.scala:336)
at org.scalatest.concurrent.Eventually$.eventually(Eventually.scala:478)
at org.apache.spark.streaming.DStreamCheckpointTester$class.generateOutput(CheckpointSuite
.scala:172)
at org.apache.spark.streaming.CheckpointSuite.generateOutput(CheckpointSuite.scala:211)
```
the check condition is:
```
val checkpointFilesOfLatestTime = Checkpoint.getCheckpointFiles(checkpointDir).filter {
_.toString.contains(clock.getTimeMillis.toString)
}
// Checkpoint files are written twice for every batch interval. So assert that both
// are written to make sure that both of them have been written.
assert(checkpointFilesOfLatestTime.size === 2)
```
the path string may contain the `clock.getTimeMillis.toString`, like `3500` :
```
file:/root/dev/spark/assembly/CheckpointSuite/spark-20035007-9891-4fb6-91c1-cc15b7ccaf15/checkpoint-500
file:/root/dev/spark/assembly/CheckpointSuite/spark-20035007-9891-4fb6-91c1-cc15b7ccaf15/checkpoint-1000
file:/root/dev/spark/assembly/CheckpointSuite/spark-20035007-9891-4fb6-91c1-cc15b7ccaf15/checkpoint-1500
file:/root/dev/spark/assembly/CheckpointSuite/spark-20035007-9891-4fb6-91c1-cc15b7ccaf15/checkpoint-2000
file:/root/dev/spark/assembly/CheckpointSuite/spark-20035007-9891-4fb6-91c1-cc15b7ccaf15/checkpoint-2500
file:/root/dev/spark/assembly/CheckpointSuite/spark-20035007-9891-4fb6-91c1-cc15b7ccaf15/checkpoint-3000
file:/root/dev/spark/assembly/CheckpointSuite/spark-20035007-9891-4fb6-91c1-cc15b7ccaf15/checkpoint-3500.bk
file:/root/dev/spark/assembly/CheckpointSuite/spark-20035007-9891-4fb6-91c1-cc15b7ccaf15/checkpoint-3500
▲▲▲▲
```
so we should only check the filename, but not the whole path.
## How was this patch tested?
Jenkins.
Author: uncleGen <hustyugm@gmail.com>
Closes#17167 from uncleGen/flaky-CheckpointSuite.
## What changes were proposed in this pull request?
This PR proposes to remove incorrect implementation that has been not executed so far (at least from Spark 1.5.2) for `in` operator and throw a correct exception rather than saying it is a bool. I tested the codes above in 1.5.2, 1.6.3, 2.1.0 and in the master branch as below:
**1.5.2**
```python
>>> df = sqlContext.createDataFrame([[1]])
>>> 1 in df._1
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File ".../spark-1.5.2-bin-hadoop2.6/python/pyspark/sql/column.py", line 418, in __nonzero__
raise ValueError("Cannot convert column into bool: please use '&' for 'and', '|' for 'or', "
ValueError: Cannot convert column into bool: please use '&' for 'and', '|' for 'or', '~' for 'not' when building DataFrame boolean expressions.
```
**1.6.3**
```python
>>> 1 in sqlContext.range(1).id
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File ".../spark-1.6.3-bin-hadoop2.6/python/pyspark/sql/column.py", line 447, in __nonzero__
raise ValueError("Cannot convert column into bool: please use '&' for 'and', '|' for 'or', "
ValueError: Cannot convert column into bool: please use '&' for 'and', '|' for 'or', '~' for 'not' when building DataFrame boolean expressions.
```
**2.1.0**
```python
>>> 1 in spark.range(1).id
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File ".../spark-2.1.0-bin-hadoop2.7/python/pyspark/sql/column.py", line 426, in __nonzero__
raise ValueError("Cannot convert column into bool: please use '&' for 'and', '|' for 'or', "
ValueError: Cannot convert column into bool: please use '&' for 'and', '|' for 'or', '~' for 'not' when building DataFrame boolean expressions.
```
**Current Master**
```python
>>> 1 in spark.range(1).id
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File ".../spark/python/pyspark/sql/column.py", line 452, in __nonzero__
raise ValueError("Cannot convert column into bool: please use '&' for 'and', '|' for 'or', "
ValueError: Cannot convert column into bool: please use '&' for 'and', '|' for 'or', '~' for 'not' when building DataFrame boolean expressions.
```
**After**
```python
>>> 1 in spark.range(1).id
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File ".../spark/python/pyspark/sql/column.py", line 184, in __contains__
raise ValueError("Cannot apply 'in' operator against a column: please use 'contains' "
ValueError: Cannot apply 'in' operator against a column: please use 'contains' in a string column or 'array_contains' function for an array column.
```
In more details,
It seems the implementation intended to support this
```python
1 in df.column
```
However, currently, it throws an exception as below:
```python
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File ".../spark/python/pyspark/sql/column.py", line 426, in __nonzero__
raise ValueError("Cannot convert column into bool: please use '&' for 'and', '|' for 'or', "
ValueError: Cannot convert column into bool: please use '&' for 'and', '|' for 'or', '~' for 'not' when building DataFrame boolean expressions.
```
What happens here is as below:
```python
class Column(object):
def __contains__(self, item):
print "I am contains"
return Column()
def __nonzero__(self):
raise Exception("I am nonzero.")
>>> 1 in Column()
I am contains
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "<stdin>", line 6, in __nonzero__
Exception: I am nonzero.
```
It seems it calls `__contains__` first and then `__nonzero__` or `__bool__` is being called against `Column()` to make this a bool (or int to be specific).
It seems `__nonzero__` (for Python 2), `__bool__` (for Python 3) and `__contains__` forcing the the return into a bool unlike other operators. There are few references about this as below:
https://bugs.python.org/issue16011http://stackoverflow.com/questions/12244074/python-source-code-for-built-in-in-operator/12244378#12244378http://stackoverflow.com/questions/38542543/functionality-of-python-in-vs-contains/38542777
It seems we can't overwrite `__nonzero__` or `__bool__` as a workaround to make this working because these force the return type as a bool as below:
```python
class Column(object):
def __contains__(self, item):
print "I am contains"
return Column()
def __nonzero__(self):
return "a"
>>> 1 in Column()
I am contains
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
TypeError: __nonzero__ should return bool or int, returned str
```
## How was this patch tested?
Added unit tests in `tests.py`.
Author: hyukjinkwon <gurwls223@gmail.com>
Closes#17160 from HyukjinKwon/SPARK-19701.
## What changes were proposed in this pull request?
This is a simple implementation of RecommendForAllUsers & RecommendForAllItems for the Dataframe version of ALS. It uses Dataframe operations (not a wrapper on the RDD implementation). Haven't benchmarked against a wrapper, but unit test examples do work.
## How was this patch tested?
Unit tests
```
$ build/sbt
> mllib/testOnly *ALSSuite -- -z "recommendFor"
> mllib/testOnly
```
Author: Your Name <you@example.com>
Author: sueann <sueann@databricks.com>
Closes#17090 from sueann/SPARK-19535.
## What changes were proposed in this pull request?
This PR proposes to both,
**Do not allow json arrays with multiple elements and return null in `from_json` with `StructType` as the schema.**
Currently, it only reads the single row when the input is a json array. So, the codes below:
```scala
import org.apache.spark.sql.functions._
import org.apache.spark.sql.types._
val schema = StructType(StructField("a", IntegerType) :: Nil)
Seq(("""[{"a": 1}, {"a": 2}]""")).toDF("struct").select(from_json(col("struct"), schema)).show()
```
prints
```
+--------------------+
|jsontostruct(struct)|
+--------------------+
| [1]|
+--------------------+
```
This PR simply suggests to print this as `null` if the schema is `StructType` and input is json array.with multiple elements
```
+--------------------+
|jsontostruct(struct)|
+--------------------+
| null|
+--------------------+
```
**Support json arrays in `from_json` with `ArrayType` as the schema.**
```scala
import org.apache.spark.sql.functions._
import org.apache.spark.sql.types._
val schema = ArrayType(StructType(StructField("a", IntegerType) :: Nil))
Seq(("""[{"a": 1}, {"a": 2}]""")).toDF("array").select(from_json(col("array"), schema)).show()
```
prints
```
+-------------------+
|jsontostruct(array)|
+-------------------+
| [[1], [2]]|
+-------------------+
```
## How was this patch tested?
Unit test in `JsonExpressionsSuite`, `JsonFunctionsSuite`, Python doctests and manual test.
Author: hyukjinkwon <gurwls223@gmail.com>
Closes#16929 from HyukjinKwon/disallow-array.
## What changes were proposed in this pull request?
Add column functions: to_json, from_json, and tests covering error cases.
## How was this patch tested?
unit tests, manual
Author: Felix Cheung <felixcheung_m@hotmail.com>
Closes#17134 from felixcheung/rtojson.
## What changes were proposed in this pull request?
This pr is to support Seq, Map, and Struct in functions.lit; it adds a new IF named `lit2` with `TypeTag` for avoiding type erasure.
## How was this patch tested?
Added tests in `LiteralExpressionSuite`
Author: Takeshi Yamamuro <yamamuro@apache.org>
Author: Takeshi YAMAMURO <linguin.m.s@gmail.com>
Closes#16610 from maropu/SPARK-19254.
