## What changes were proposed in this pull request?
Introducing new config for initially blacklisted YARN nodes.
## How was this patch tested?
With existing and a new unit test.
Closes#23616 from attilapiros/SPARK-26688.
Lead-authored-by: “attilapiros” <piros.attila.zsolt@gmail.com>
Co-authored-by: Attila Zsolt Piros <2017933+attilapiros@users.noreply.github.com>
Signed-off-by: Imran Rashid <irashid@cloudera.com>
## What changes were proposed in this pull request?
Retrieve enableFetcherCache option from submission conf rather than dispatcher conf. This resolves some confusing behavior where Spark drivers currently get this conf from the dispatcher, whereas Spark executors get this conf from the submission. After this change, the conf will only need to be specified once.
## How was this patch tested?
With (updated) existing tests.
Closes#23924 from mwlon/SPARK-26192.
Authored-by: mwlon <mloncaric@hmc.edu>
Signed-off-by: Dongjoon Hyun <dhyun@apple.com>
## What changes were proposed in this pull request?
[SPARK-23155](https://issues.apache.org/jira/browse/SPARK-23155) enables SHS to set up custom executor log URLs. This patch proposes to extend this feature to to Spark UI as well.
Unlike the approach we did for SHS (replace executor log URLs when executor information is requested so it's like a change of view), here this patch replaces executor log URLs while registering executor, which also affects event log as well. In point of SHS's view, it will be treated as original log url when custom log url is applied to Spark UI.
## How was this patch tested?
Added UT.
Closes#23790 from HeartSaVioR/SPARK-26792.
Authored-by: Jungtaek Lim (HeartSaVioR) <kabhwan@gmail.com>
Signed-off-by: Marcelo Vanzin <vanzin@cloudera.com>
Running Spark in Docker image with Alpine Linux 3.9.0 throws errors when using snappy.
The issue can be reproduced for example as follows: `Seq(1,2).toDF("id").write.format("parquet").save("DELETEME1")`
The key part of the error stack is as follows `SparkException: Task failed while writing rows. .... Caused by: java.lang.UnsatisfiedLinkError: /tmp/snappy-1.1.7-2b4872f1-7c41-4b84-bda1-dbcb8dd0ce4c-libsnappyjava.so: Error loading shared library ld-linux-x86-64.so.2: Noded by /tmp/snappy-1.1.7-2b4872f1-7c41-4b84-bda1-dbcb8dd0ce4c-libsnappyjava.so)`
The source of the error appears to be that libsnappyjava.so needs ld-linux-x86-64.so.2 and looks for it in /lib, while in Alpine Linux 3.9.0 with libc6-compat version 1.1.20-r3 ld-linux-x86-64.so.2 is located in /lib64.
Note: this issue is not present with Alpine Linux 3.8 and libc6-compat version 1.1.19-r10
## What changes were proposed in this pull request?
A possible workaround proposed with this PR is to modify the Dockerfile by adding a symbolic link between /lib and /lib64 so that linux-x86-64.so.2 can be found in /lib. This is probably not the cleanest solution, but I have observed that this is what happened/happens already when using Alpine Linux 3.8.1 (a version of Alpine Linux which was not affected by the issue reported here).
## How was this patch tested?
Manually tested by running a simple workload with spark-shell, using docker on a client machine and using Spark on a Kubernetes cluster. The test workload is: `Seq(1,2).toDF("id").write.format("parquet").save("DELETEME1")`
Added a test to the KubernetesSuite / BasicTestsSuite
Closes#23898 from LucaCanali/dockerfileUpdateSPARK26995.
Authored-by: Luca Canali <luca.canali@cern.ch>
Signed-off-by: Marcelo Vanzin <vanzin@cloudera.com>
## What changes were proposed in this pull request?
SPARK-19185 is resolved so the reference can be removed from the documentation.
## How was this patch tested?
cd docs/
SKIP_API=1 jekyll build
Manual webpage check.
Closes#23959 from gaborgsomogyi/SPARK-27046.
Authored-by: Gabor Somogyi <gabor.g.somogyi@gmail.com>
Signed-off-by: Sean Owen <sean.owen@databricks.com>
## What changes were proposed in this pull request?
When reading files with empty partition columns, we can avoid using JoinRow.
## How was this patch tested?
Existing unit tests.
Closes#23953 from gengliangwang/avoidJoinRow.
Authored-by: Gengliang Wang <gengliang.wang@databricks.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
## What changes were proposed in this pull request?
In master, `ElementAt` nullable is always true;
be1cadf16d/sql/catalyst/src/main/scala/org/apache/spark/sql/catalyst/expressions/collectionOperations.scala (L1977)
But, If input is an array and foldable, we could make its nullability more precise.
This fix is based on SPARK-26637(#23566).
## How was this patch tested?
Added tests in `CollectionExpressionsSuite`.
Closes#23867 from maropu/SPARK-26965.
Authored-by: Takeshi Yamamuro <yamamuro@apache.org>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
## What changes were proposed in this pull request?
This PR adds support for pushing down LeftSemi and LeftAnti joins below operators such as Project, Aggregate, Window, Union etc. This is the initial piece of work that will be needed for
the subsequent work of moving the subquery rewrites to the beginning of optimization phase.
The larger PR is [here](https://github.com/apache/spark/pull/23211) . This PR addresses the comment at [link](https://github.com/apache/spark/pull/23211#issuecomment-445705922).
## How was this patch tested?
Added a new test suite LeftSemiAntiJoinPushDownSuite.
Closes#23750 from dilipbiswal/SPARK-19712-pushleftsemi.
Authored-by: Dilip Biswal <dbiswal@us.ibm.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
## What changes were proposed in this pull request?
Similar to `SaveMode`, we should remove streaming `OutputMode` from data source v2 API, and use operations that has clear semantic.
The changes are:
1. append mode: create `StreamingWrite` directly. By default, the `WriteBuilder` will create `Write` to append data.
2. complete mode: call `SupportsTruncate#truncate`. Complete mode means truncating all the old data and appending new data of the current epoch. `SupportsTruncate` has exactly the same semantic.
3. update mode: fail. The current streaming framework can't propagate the update keys, so v2 sinks are not able to implement update mode. In the future we can introduce a `SupportsUpdate` trait.
The behavior changes:
1. all the v2 sinks(foreach, console, memory, kafka, noop) don't support update mode. The fact is, previously all the v2 sinks implement the update mode wrong. None of them can really support it.
2. kafka sink doesn't support complete mode. The fact is, the kafka sink can only append data.
## How was this patch tested?
existing tests
Closes#23859 from cloud-fan/update.
Authored-by: Wenchen Fan <wenchen@databricks.com>
Signed-off-by: gatorsmile <gatorsmile@gmail.com>
## What changes were proposed in this pull request?
This PR introduces leveraging of subquery filters for partition pruning in file source.
Subquery expressions are not allowed to be used for partition pruning in `FileSourceStrategy` now, instead a `FilterExec` is added around the `FileSourceScanExec` to do the job.
This PR optimizes the process by allowing partition pruning subquery expressions as partition filters.
## How was this patch tested?
Added new UT and run existing UTs especially SPARK-25482 and SPARK-24085 related ones.
Closes#23802 from peter-toth/SPARK-26893.
Authored-by: Peter Toth <peter.toth@gmail.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
## What changes were proposed in this pull request?
Reduce work in HDFSMetadataLogSuite test to possibly de-flake it.
## How was this patch tested?
Existing tests
Closes#23937 from srowen/SPARK-27032.
Authored-by: Sean Owen <sean.owen@databricks.com>
Signed-off-by: Hyukjin Kwon <gurwls223@apache.org>
## What changes were proposed in this pull request?
This patch proposes refactoring `serializerFor` method between `ScalaReflection` and `JavaTypeInference`, being consistent with what we refactored for `deserializerFor` in #23854.
This patch also extracts the logic on recording walk type path since the logic is duplicated across `serializerFor` and `deserializerFor` with `ScalaReflection` and `JavaTypeInference`.
## How was this patch tested?
Existing tests.
Closes#23908 from HeartSaVioR/SPARK-27001.
Authored-by: Jungtaek Lim (HeartSaVioR) <kabhwan@gmail.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
## What changes were proposed in this pull request?
Use the maven plugin option `treatWarningsAsErrors` to make sure the warnings are treated as errors while generating the parser file. In the absence of it, we may inadvertently introducing problems while making grammar changes. Please refer to [PR-23897](https://github.com/apache/spark/pull/23897) to know more about the context.
## How was this patch tested?
We can use two ways to build Spark 1) sbt 2) Maven
This PR, we made a change to configure the maven antlr plugin to include a parameter that makes antlr4 report error on warning. However, when spark is built using sbt, we use the sbt antlr plugin which does not allow us to pass this additional compilation flag. More info on sbt-antlr plugin can be found at [link](https://github.com/ihji/sbt-antlr4/blob/master/src/main/scala/com/simplytyped/Antlr4Plugin.scala)
In summary, this fix only applicable when we use maven to build.
Closes#23925 from dilipbiswal/antlr_fix.
Authored-by: Dilip Biswal <dbiswal@us.ibm.com>
Signed-off-by: Sean Owen <sean.owen@databricks.com>
## What changes were proposed in this pull request?
Update Thrift to 0.12.0 to pick up bug and security fixes.
Changes: https://github.com/apache/thrift/blob/master/CHANGES.md
The important one is for https://issues.apache.org/jira/browse/THRIFT-4506
## How was this patch tested?
Existing tests. A quick local test suggests this works.
Closes#23935 from srowen/SPARK-27029.
Authored-by: Sean Owen <sean.owen@databricks.com>
Signed-off-by: Dongjoon Hyun <dhyun@apple.com>
## What changes were proposed in this pull request?
Add RawPrediction to OneVsRest in PySpark to make it consistent with scala implementation
## How was this patch tested?
Add doctest
Closes#23910 from huaxingao/spark-27007.
Authored-by: Huaxin Gao <huaxing@us.ibm.com>
Signed-off-by: Sean Owen <sean.owen@databricks.com>
## What changes were proposed in this pull request?
Docs still say that Spark will be available on PyPi "in the future"; just needs to be updated.
## How was this patch tested?
Doc build
Closes#23933 from srowen/SPARK-26807.
Authored-by: Sean Owen <sean.owen@databricks.com>
Signed-off-by: Hyukjin Kwon <gurwls223@apache.org>
## What changes were proposed in this pull request?
Currently we can use `df.printSchema` to discover the schema information for a query. We should have a way to describe the output schema of a query using SQL interface.
Example:
DESCRIBE SELECT * FROM desc_table
DESCRIBE QUERY SELECT * FROM desc_table
```SQL
spark-sql> create table desc_table (c1 int comment 'c1-comment', c2 decimal comment 'c2-comment', c3 string);
spark-sql> desc select * from desc_table;
c1 int c1-comment
c2 decimal(10,0) c2-comment
c3 string NULL
```
## How was this patch tested?
Added a new test under SQLQueryTestSuite and SparkSqlParserSuite
Closes#23883 from dilipbiswal/dkb_describe_query.
Authored-by: Dilip Biswal <dbiswal@us.ibm.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
## What changes were proposed in this pull request?
Fix warn against subclassing scala.App
## How was this patch tested?
Manual test
Closes#23903 from manuzhang/fix_submit_warning.
Authored-by: manuzhang <owenzhang1990@gmail.com>
Signed-off-by: Sean Owen <sean.owen@databricks.com>
## What changes were proposed in this pull request?
I see the following new warning from ANTR4 after SPARK-26215 after it added `SCHEMA` keyword in the reserved/unreserved list. This is a minor PR to cleanup the warning.
```
WARNING] warning(125): org/apache/spark/sql/catalyst/parser/SqlBase.g4:784:90: implicit definition of token SCHEMA in parser
[WARNING] .../apache/spark/org/apache/spark/sql/catalyst/parser/SqlBase.g4 [784:90]: implicit definition of token SCHEMA in parser
```
## How was this patch tested?
Manually built catalyst after the fix to verify
Closes#23897 from dilipbiswal/minor_parser_token.
Authored-by: Dilip Biswal <dbiswal@us.ibm.com>
Signed-off-by: Dongjoon Hyun <dhyun@apple.com>
## What changes were proposed in this pull request?
`MetricsSystem` instance creations have a scattered distribution in the project code. So do their names. It may cause some inconvenience for browsing and management.
This PR tries to put them together. In this way, we can have a uniform location for adding or removing them, and have a overall view of `MetircsSystem `instances in current project.
It's also helpful for maintaining user documents by avoiding missing something.
## How was this patch tested?
Existing unit tests.
Closes#23869 from SongYadong/metrics_system_inst_manage.
Lead-authored-by: SongYadong <song.yadong1@zte.com.cn>
Co-authored-by: walter2001 <ydsong2007@163.com>
Signed-off-by: Sean Owen <sean.owen@databricks.com>
## What changes were proposed in this pull request?
Redundant `get` when getting a value from `Map` given a key.
## How was this patch tested?
N/A
Closes#23901 from 10110346/removegetfrommap.
Authored-by: liuxian <liu.xian3@zte.com.cn>
Signed-off-by: Sean Owen <sean.owen@databricks.com>
## What changes were proposed in this pull request?
Remove a few new JAXB dependencies that shouldn't be necessary now.
See https://github.com/apache/spark/pull/23890#issuecomment-468299922
## How was this patch tested?
Existing tests
Closes#23923 from srowen/SPARK-26986.2.
Authored-by: Sean Owen <sean.owen@databricks.com>
Signed-off-by: Sean Owen <sean.owen@databricks.com>
## What changes were proposed in this pull request?
Add standard deviation to the stats taken during benchmark testing.
## How was this patch tested?
Manually ran a few benchmark tests locally and visually inspected the output
Closes#23914 from yifeih/spark-27009-stdev.
Authored-by: Yifei Huang <yifeih@palantir.com>
Signed-off-by: Dongjoon Hyun <dhyun@apple.com>
Using the current time as an ID is more prone to clashes than people generally
realize, so try to make things a bit more unique without necessarily using a
UUID, which would eat too much space in the names otherwise.
The implemented approach uses some bits from the current time, plus some random
bits, which should be more resistant to clashes.
Closes#23805 from vanzin/SPARK-26420.
Authored-by: Marcelo Vanzin <vanzin@cloudera.com>
Signed-off-by: Dongjoon Hyun <dhyun@apple.com>
## What changes were proposed in this pull request?
In the PR, I propose to add new Catalyst type converter for `DateType`. It should be able to convert `java.time.LocalDate` to/from `DateType`.
Main motivations for the changes:
- Smoothly support Java 8 time API
- Avoid inconsistency of calendars used inside of Spark 3.0 (Proleptic Gregorian calendar) and `java.sql.Date` (hybrid calendar - Julian + Gregorian).
- Make conversion independent from current system timezone.
By default, Spark converts values of `DateType` to `java.sql.Date` instances but the SQL config `spark.sql.datetime.java8API.enabled` can change the behavior. If it is set to `true`, Spark uses `java.time.LocalDate` as external type for `DateType`.
## How was this patch tested?
Added new testes to `CatalystTypeConvertersSuite` to check conversion of `DateType` to/from `java.time.LocalDate`, `JavaUDFSuite`/ `UDFSuite` to test usage of `LocalDate` type in Scala/Java UDFs.
Closes#23913 from MaxGekk/date-localdate.
Authored-by: Maxim Gekk <maxim.gekk@databricks.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
A couple of places in TaskSchedulerImpl could use a minor doc update on
threading concerns. There is one bug fix here, but only in
sc.killTaskAttempt() which is probably not used much.
Closes#23874 from squito/SPARK-26774.
Authored-by: Imran Rashid <irashid@cloudera.com>
Signed-off-by: Marcelo Vanzin <vanzin@cloudera.com>
## What changes were proposed in this pull request?
Add sample weights to decision trees
## How was this patch tested?
updated testsuites
Closes#23818 from zhengruifeng/py_tree_support_sample_weight.
Authored-by: zhengruifeng <ruifengz@foxmail.com>
Signed-off-by: Sean Owen <sean.owen@databricks.com>
## What changes were proposed in this pull request?
Currently, if I run `spark-shell` in my local, it started to show the logs as below:
```
$ ./bin/spark-shell
...
19/02/28 04:42:43 INFO SecurityManager: Changing view acls to: hkwon
19/02/28 04:42:43 INFO SecurityManager: Changing modify acls to: hkwon
19/02/28 04:42:43 INFO SecurityManager: Changing view acls groups to:
19/02/28 04:42:43 INFO SecurityManager: Changing modify acls groups to:
19/02/28 04:42:43 INFO SecurityManager: SecurityManager: authentication disabled; ui acls disabled; users with view permissions: Set(hkwon); groups with view permissions: Set(); users with modify permissions: Set(hkwon); groups with modify permissions: Set()
19/02/28 04:42:43 INFO SignalUtils: Registered signal handler for INT
19/02/28 04:42:48 INFO SparkContext: Running Spark version 3.0.0-SNAPSHOT
19/02/28 04:42:48 INFO SparkContext: Submitted application: Spark shell
19/02/28 04:42:48 INFO SecurityManager: Changing view acls to: hkwon
```
Seems to be the cause is https://github.com/apache/spark/pull/23806 and `prepareSubmitEnvironment` looks actually reinitializing the logging again.
This PR proposes to uninitializing log later after `prepareSubmitEnvironment`.
## How was this patch tested?
Manually tested.
Closes#23911 from HyukjinKwon/SPARK-26895.
Authored-by: Hyukjin Kwon <gurwls223@apache.org>
Signed-off-by: Marcelo Vanzin <vanzin@cloudera.com>
## What changes were proposed in this pull request?
Spark not always picking up the latest Kafka delegation tokens even if a new one properly obtained.
In the PR I'm setting delegation tokens right before `KafkaConsumer` and `KafkaProducer` creation to be on the safe side.
## How was this patch tested?
Long running Kafka to Kafka tests on 4 node cluster with randomly thrown artificial exceptions.
Test scenario:
* 4 node cluster
* Yarn
* Kafka broker version 2.1.0
* security.protocol = SASL_SSL
* sasl.mechanism = SCRAM-SHA-512
Kafka broker settings:
* delegation.token.expiry.time.ms=600000 (10 min)
* delegation.token.max.lifetime.ms=1200000 (20 min)
* delegation.token.expiry.check.interval.ms=300000 (5 min)
After each 7.5 minutes new delegation token obtained from Kafka broker (10 min * 0.75).
But when token expired after 10 minutes (Spark obtains new one and doesn't renew the old), the brokers expiring thread comes after each 5 minutes (invalidates expired tokens) and artificial exception has been thrown inside the Spark application (such case Spark closes connection), then the latest delegation token not always picked up.
Closes#23906 from gaborgsomogyi/SPARK-27002.
Authored-by: Gabor Somogyi <gabor.g.somogyi@gmail.com>
Signed-off-by: Marcelo Vanzin <vanzin@cloudera.com>
## What changes were proposed in this pull request?
Continuous processing is waiting on epochs which are not yet complete (for example one partition is not making progress) and stores pending items in queues. These queues are unbounded and can consume up all the memory easily. In this PR I've added `spark.sql.streaming.continuous.epochBacklogQueueSize` configuration possibility to make them bounded. If the related threshold reached then the query will stop with `IllegalStateException`.
## How was this patch tested?
Existing + additional unit tests.
Closes#23156 from gaborgsomogyi/SPARK-24063.
Authored-by: Gabor Somogyi <gabor.g.somogyi@gmail.com>
Signed-off-by: Marcelo Vanzin <vanzin@cloudera.com>
Before this change, there was some code in the k8s backend to deal
with how to resolve dependencies and make them available to the
Spark application. It turns out that none of that code is necessary,
since spark-submit already handles all that for applications started
in client mode - like the k8s driver that is run inside a Spark-created
pod.
For that reason, specifically for pyspark, there's no need for the
k8s backend to deal with PYTHONPATH; or, in general, to change the URIs
provided by the user at all. spark-submit takes care of that.
For testing, I created a pyspark script that depends on another module
that is shipped with --py-files. Then I used:
- --py-files http://.../dep.pyhttp://.../test.py
- --py-files http://.../dep.ziphttp://.../test.py
- --py-files local:/.../dep.py local:/.../test.py
- --py-files local:/.../dep.zip local:/.../test.py
Without this change, all of the above commands fail. With the change, the
driver is able to see the dependencies in all the above cases; but executors
don't see the dependencies in the last two. That's a bug in shared Spark code
that deals with local: dependencies in pyspark (SPARK-26934).
I also tested a Scala app using the main jar from an http server.
Closes#23793 from vanzin/SPARK-24736.
Authored-by: Marcelo Vanzin <vanzin@cloudera.com>
Signed-off-by: Marcelo Vanzin <vanzin@cloudera.com>
## What changes were proposed in this pull request?
After upgrading cloudpickle to 0.6.1 at https://github.com/apache/spark/pull/20691, one regression was found. Cloudpickle had a critical https://github.com/cloudpipe/cloudpickle/pull/240 for that.
Basically, it currently looks existing globals would override globals shipped in a function's, meaning:
**Before:**
```python
>>> def hey():
... return "Hi"
...
>>> spark.range(1).rdd.map(lambda _: hey()).collect()
['Hi']
>>> def hey():
... return "Yeah"
...
>>> spark.range(1).rdd.map(lambda _: hey()).collect()
['Hi']
```
**After:**
```python
>>> def hey():
... return "Hi"
...
>>> spark.range(1).rdd.map(lambda _: hey()).collect()
['Hi']
>>>
>>> def hey():
... return "Yeah"
...
>>> spark.range(1).rdd.map(lambda _: hey()).collect()
['Yeah']
```
Therefore, this PR upgrades cloudpickle to 0.8.0.
Note that cloudpickle's release cycle is quite short.
Between 0.6.1 and 0.7.0, it contains minor bug fixes. I don't see notable changes to double check and/or avoid.
There is virtually only this fix between 0.7.0 and 0.8.1 - other fixes are about testing.
## How was this patch tested?
Manually tested, tests were added. Verified unit tests were added in cloudpickle.
Closes#23904 from HyukjinKwon/SPARK-27000.
Authored-by: Hyukjin Kwon <gurwls223@apache.org>
Signed-off-by: Hyukjin Kwon <gurwls223@apache.org>
## What changes were proposed in this pull request?
This PR proposes to extend the documentation of the Spark metrics system in the monitoring guide. In particular by:
- adding a list of the available metrics grouped per component instance
- adding information on configuration parameters that can be used to configure the metrics system in alternative to the metrics.properties file
- adding information on the configuration parameters needed to enable certain metrics
- it also propose to add an example of Graphite sink configuration in metrics.properties.template
Closes#23798 from LucaCanali/metricsDocUpdate.
Authored-by: Luca Canali <luca.canali@cern.ch>
Signed-off-by: Sean Owen <sean.owen@databricks.com>
## What changes were proposed in this pull request?
Modifies `setup.py` so that `sbin` subdirectory is included in pyspark
## How was this patch tested?
Manually tested with python 2.7 and python 3.7
```sh
$ ./build/mvn -D skipTests -P hive -P hive-thriftserver -P yarn -P mesos clean package
$ cd python
$ python setup.py sdist
$ pip install dist/pyspark-2.1.0.dev0.tar.gz
```
Checked manually that `sbin` is now present in install directory.
srowen holdenk
Closes#23715 from oulenz/pyspark_sbin.
Authored-by: Oliver Urs Lenz <oliver.urs.lenz@gmail.com>
Signed-off-by: Sean Owen <sean.owen@databricks.com>
## What changes were proposed in this pull request?
Comparing whether Boolean expression is equal to true is redundant
For example:
The datatype of `a` is boolean.
Before:
if (a == true)
After:
if (a)
## How was this patch tested?
N/A
Closes#23884 from 10110346/simplifyboolean.
Authored-by: liuxian <liu.xian3@zte.com.cn>
Signed-off-by: Sean Owen <sean.owen@databricks.com>
## What changes were proposed in this pull request?
In the PR, I propose to add new Catalyst type converter for `TimestampType`. It should be able to convert `java.time.Instant` to/from `TimestampType`.
Main motivations for the changes:
- Smoothly support Java 8 time API
- Avoid inconsistency of calendars used inside of Spark 3.0 (Proleptic Gregorian calendar) and `java.sql.Timestamp` (hybrid calendar - Julian + Gregorian).
- Make conversion independent from current system timezone.
By default, Spark converts values of `TimestampType` to `java.sql.Timestamp` instances but the SQL config `spark.sql.catalyst.timestampType` can change the behavior. It accepts two values `Timestamp` (default) and `Instant`. If the former one is set, Spark returns `java.time.Instant` instances for timestamp values.
## How was this patch tested?
Added new testes to `CatalystTypeConvertersSuite` to check conversion of `TimestampType` to/from `java.time.Instant`.
Closes#23811 from MaxGekk/timestamp-instant.
Lead-authored-by: Maxim Gekk <maxim.gekk@databricks.com>
Co-authored-by: Maxim Gekk <max.gekk@gmail.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
## What changes were proposed in this pull request?
WIth the following file structure:
```
/tmp/data
└── a=5
```
In the previous release:
```
scala> spark.read.schema("A int, ID long").parquet("/tmp/data/").printSchema
root
|-- ID: long (nullable = true)
|-- A: integer (nullable = true)
```
While in current code:
```
scala> spark.read.schema("A int, ID long").parquet("/tmp/data/").printSchema
root
|-- ID: long (nullable = true)
|-- a: integer (nullable = true)
```
We can see that the partition column name `a` is different from `A` as user specifed. This PR is to fix the case and make it more user-friendly.
## How was this patch tested?
Unit test
Closes#23894 from gengliangwang/fileIndexSchema.
Authored-by: Gengliang Wang <gengliang.wang@databricks.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
## What changes were proposed in this pull request?
Spark expects the type of column and the type of matching field is same when deserializing to Object, but Spark hasn't actually restrict it (at least for Java bean encoder) and some users just do it and experience undefined behavior (in SPARK-22000, Spark throws compilation failure on generated code because it calls `.toString()` against primitive type.
It doesn't produce error in Scala side because `ScalaReflection.deserializerFor` properly inject Upcast if necessary. This patch proposes applying same thing to `JavaTypeInference.deserializerFor` as well.
Credit to srowen, maropu, and cloud-fan since they provided various approaches to solve this.
## How was this patch tested?
Added UT which query is slightly modified based on sample code in attachment on JIRA issue.
Closes#23854 from HeartSaVioR/SPARK-22000.
Authored-by: Jungtaek Lim (HeartSaVioR) <kabhwan@gmail.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
## What changes were proposed in this pull request?
This PR targets to add vectorized `dapply()` in R, Arrow optimization.
This can be tested as below:
```bash
$ ./bin/sparkR --conf spark.sql.execution.arrow.enabled=true
```
```r
df <- createDataFrame(mtcars)
collect(dapply(df, function(rdf) { data.frame(rdf$gear + 1) }, structType("gear double")))
```
### Requirements
- R 3.5.x
- Arrow package 0.12+
```bash
Rscript -e 'remotes::install_github("apache/arrowapache-arrow-0.12.0", subdir = "r")'
```
**Note:** currently, Arrow R package is not in CRAN. Please take a look at ARROW-3204.
**Note:** currently, Arrow R package seems not supporting Windows. Please take a look at ARROW-3204.
### Benchmarks
**Shall**
```bash
sync && sudo purge
./bin/sparkR --conf spark.sql.execution.arrow.enabled=false --driver-memory 4g
```
```bash
sync && sudo purge
./bin/sparkR --conf spark.sql.execution.arrow.enabled=true --driver-memory 4g
```
**R code**
```r
rdf <- read.csv("500000.csv")
df <- cache(createDataFrame(rdf))
count(df)
test <- function() {
options(digits.secs = 6) # milliseconds
start.time <- Sys.time()
count(cache(dapply(df, function(rdf) { rdf }, schema(df))))
end.time <- Sys.time()
time.taken <- end.time - start.time
print(time.taken)
}
test()
```
**Data (350 MB):**
```r
object.size(read.csv("500000.csv"))
350379504 bytes
```
"500000 Records" http://eforexcel.com/wp/downloads-16-sample-csv-files-data-sets-for-testing/
**Results**
```
Time difference of 13.42037 mins
```
```
Time difference of 30.64156 secs
```
The performance improvement was around **2627%**.
### Limitations
- For now, Arrow optimization with R does not support when the data is `raw`, and when user explicitly gives float type in the schema. They produce corrupt values.
- Due to ARROW-4512, it cannot send and receive batch by batch. It has to send all batches in Arrow stream format at once. It needs improvement later.
## How was this patch tested?
Unit tests were added, and manually tested.
Closes#23787 from HyukjinKwon/SPARK-26830-1.
Authored-by: Hyukjin Kwon <gurwls223@apache.org>
Signed-off-by: Hyukjin Kwon <gurwls223@apache.org>
## What changes were proposed in this pull request?
In SPARK-26619, we make change to prune unnecessary individual serializers when serializing objects. This is extension to SPARK-26619. We can further prune nested fields from object serializers if they are not used.
For example, in following query, we only use one field in a struct column:
```scala
val data = Seq((("a", 1), 1), (("b", 2), 2), (("c", 3), 3))
val df = data.toDS().map(t => (t._1, t._2 + 1)).select("_1._1")
```
So, instead of having a serializer to create a two fields struct, we can prune unnecessary field from it. This is what this PR proposes to do.
In order to make this change conservative and safer, a SQL config is added to control it. It is disabled by default.
TODO: Support to prune nested fields inside MapType's key and value.
## How was this patch tested?
Added tests.
Closes#23740 from viirya/nested-pruning-serializer-2.
Authored-by: Liang-Chi Hsieh <viirya@gmail.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
## What changes were proposed in this pull request?
Add reference JAXB impl for Java 9+ from Glassfish. Right now it's only apparently necessary in MLlib but can be expanded later.
## How was this patch tested?
Existing tests particularly PMML-related ones, which use JAXB.
This works on Java 11.
Closes#23890 from srowen/SPARK-26986.
Authored-by: Sean Owen <sean.owen@databricks.com>
Signed-off-by: Sean Owen <sean.owen@databricks.com>
## What changes were proposed in this pull request?
Added .transform() method to Python DataFrame API to be in sync with Scala API.
## How was this patch tested?
Addition has been tested manually.
Closes#23877 from Hellsen83/pyspark-dataframe-transform.
Authored-by: Hellsen83 <erik.christiansen83@gmail.com>
Signed-off-by: Sean Owen <sean.owen@databricks.com>
## What changes were proposed in this pull request?
This patch applies redaction to command line arguments before logging them. This applies to two resource managers: standalone cluster and YARN.
This patch only concerns about arguments starting with `-D` since Spark is likely passing the Spark configuration to command line arguments as `-Dspark.blabla=blabla`. More change is necessary if we also want to handle the case of `--conf spark.blabla=blabla`.
## How was this patch tested?
Added UT for redact logic. This patch only touches how to log so not easy to add UT regarding it.
Closes#23820 from HeartSaVioR/MINOR-redact-command-line-args-for-running-driver-executor.
Authored-by: Jungtaek Lim (HeartSaVioR) <kabhwan@gmail.com>
Signed-off-by: Marcelo Vanzin <vanzin@cloudera.com>
## What changes were proposed in this pull request?
In the PR, I propose to refactor existing code related to date/time conversions, and replace constants like `1000` and `1000000` by `DateTimeUtils` constants and transformation functions from `java.util.concurrent.TimeUnit._`.
## How was this patch tested?
The changes are tested by existing test suites.
Closes#23878 from MaxGekk/magic-time-constants.
Lead-authored-by: Maxim Gekk <max.gekk@gmail.com>
Co-authored-by: Maxim Gekk <maxim.gekk@databricks.com>
Signed-off-by: Sean Owen <sean.owen@databricks.com>
## What changes were proposed in this pull request?
Since Spark 2.0, Akka is not used anymore and Akka related stuff were removed. However there are still some leftover. This PR aims to remove these leftover.
* `/pom.xml` has a comment about Akka, which is not needed anymore.
## How was this patch tested?
Existing tests.
Closes#23885 from seancxmao/remove-akka-leftover.
Authored-by: seancxmao <seancxmao@gmail.com>
Signed-off-by: Sean Owen <sean.owen@databricks.com>
## What changes were proposed in this pull request?
In data source v2, if the data source scan implemented `SupportsReportStatistics`. `DataSourceV2Relation` should respect the row count reported by the data source.
## How was this patch tested?
New UT test.
Closes#23853 from ConeyLiu/report-row-count.
Authored-by: Xianyang Liu <xianyang.liu@intel.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
