### What changes were proposed in this pull request?
Update `AlterTableSetLocationStatement` to store `partitionSpec` and make `ALTER TABLE a.b.c PARTITION(...) SET LOCATION 'loc'` fail if `partitionSpec` is set with unsupported message.
### Why are the changes needed?
It's important to make all the commands have the same table resolution behavior, to avoid confusing end-users. e.g.
```
USE my_catalog
DESC t // success and describe the table t from my_catalog
ALTER TABLE t PARTITION(...) SET LOCATION 'loc' // report set location with partition spec is not supported.
```
### Does this PR introduce any user-facing change?
yes. When running ALTER TABLE (set partition location), Spark fails the command if the current catalog is set to a v2 catalog, or the table name specified a v2 catalog.
### How was this patch tested?
New unit tests
Closes#26304 from imback82/alter_table_partition_loc.
Authored-by: Terry Kim <yuminkim@gmail.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
### What changes were proposed in this pull request?
Add ShowColumnsStatement and make SHOW COLUMNS go through the same catalog/table resolution framework of v2 commands.
### Why are the changes needed?
It's important to make all the commands have the same table resolution behavior, to avoid confusing end-users. e.g.
USE my_catalog
DESC t // success and describe the table t from my_catalog
SHOW COLUMNS FROM t // report table not found as there is no table t in the session catalog
### Does this PR introduce any user-facing change?
yes. When running SHOW COLUMNS Spark fails the command if the current catalog is set to a v2 catalog, or the table name specified a v2 catalog.
### How was this patch tested?
Unit tests.
Closes#26182 from planga82/feature/SPARK-29523_SHOW_COLUMNS_datasourceV2.
Authored-by: Unknown <soypab@gmail.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
### What changes were proposed in this pull request?
In the PR, I propose to extract parsing of the seconds interval units to the private method `parseNanos` in `IntervalUtils` and modify the code to correctly parse the fractional part of the seconds unit of intervals in the cases:
- When the fractional part has less than 9 digits
- The seconds unit is negative
### Why are the changes needed?
The changes are needed to fix the issues:
```sql
spark-sql> select interval '10.123456 seconds';
interval 10 seconds 123 microseconds
```
The correct result must be `interval 10 seconds 123 milliseconds 456 microseconds`
```sql
spark-sql> select interval '-10.123456789 seconds';
interval -9 seconds -876 milliseconds -544 microseconds
```
but the whole interval should be negated, and the result must be `interval -10 seconds -123 milliseconds -456 microseconds`, taking into account the truncation to microseconds.
### Does this PR introduce any user-facing change?
Yes. After changes:
```sql
spark-sql> select interval '10.123456 seconds';
interval 10 seconds 123 milliseconds 456 microseconds
spark-sql> select interval '-10.123456789 seconds';
interval -10 seconds -123 milliseconds -456 microseconds
```
### How was this patch tested?
By existing and new tests in `ExpressionParserSuite`.
Closes#26313 from MaxGekk/fix-interval-nanos-parsing.
Authored-by: Maxim Gekk <max.gekk@gmail.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
### What changes were proposed in this pull request?
This adds a new rule, `V2ScanRelationPushDown`, to push filters and projections in to a new `DataSourceV2ScanRelation` in the optimizer. That scan is then used when converting to a physical scan node. The new relation correctly reports stats based on the scan.
To run scan pushdown before rules where stats are used, this adds a new optimizer override, `earlyScanPushDownRules` and a batch for early pushdown in the optimizer, before cost-based join reordering. The other early pushdown rule, `PruneFileSourcePartitions`, is moved into the early pushdown rule set.
This also moves pushdown helper methods from `DataSourceV2Strategy` into a util class.
### Why are the changes needed?
This is needed for DSv2 sources to supply stats for cost-based rules in the optimizer.
### Does this PR introduce any user-facing change?
No.
### How was this patch tested?
This updates the implementation of stats from `DataSourceV2Relation` so tests will fail if stats are accessed before early pushdown for v2 relations.
Closes#25955 from rdblue/move-v2-pushdown.
Authored-by: Ryan Blue <blue@apache.org>
Signed-off-by: Ryan Blue <blue@apache.org>
### What changes were proposed in this pull request?
To push the built jars to maven release repository, we need to remove the 'SNAPSHOT' tag from the version name.
Made the following changes in this PR:
* Update all the `3.0.0-SNAPSHOT` version name to `3.0.0-preview`
* Update the sparkR version number check logic to allow jvm version like `3.0.0-preview`
**Please note those changes were generated by the release script in the past, but this time since we manually add tags on master branch, we need to manually apply those changes too.**
We shall revert the changes after 3.0.0-preview release passed.
### Why are the changes needed?
To make the maven release repository to accept the built jars.
### Does this PR introduce any user-facing change?
No
### How was this patch tested?
N/A
### What changes were proposed in this pull request?
MICROS_PER_MONTH = DAYS_PER_MONTH * MICROS_PER_DAY
### Why are the changes needed?
fix bug
### Does this PR introduce any user-facing change?
no
### How was this patch tested?
add ut
Closes#26321 from yaooqinn/SPARK-29653.
Authored-by: Kent Yao <yaooqinn@hotmail.com>
Signed-off-by: Dongjoon Hyun <dhyun@apple.com>
### What changes were proposed in this pull request?
```
postgres=# select date '2001-09-28' + integer '7';
?column?
------------
2001-10-05
(1 row)postgres=# select integer '7';
int4
------
7
(1 row)
```
Add support for typed integer literal expression from postgreSQL.
### Why are the changes needed?
SPARK-27764 Feature Parity between PostgreSQL and Spark
### Does this PR introduce any user-facing change?
support typed integer lit in SQL
### How was this patch tested?
add uts
Closes#26291 from yaooqinn/SPARK-29629.
Authored-by: Kent Yao <yaooqinn@hotmail.com>
Signed-off-by: HyukjinKwon <gurwls223@apache.org>
## What changes were proposed in this pull request?
Now, `RepartitionByExpression` is allowed at Dataset method `Dataset.repartition()`. But in spark sql, we do not have an equivalent functionality.
In hive, we can use `distribute by`, so it's worth to add a hint to support such function.
Similar jira [SPARK-24940](https://issues.apache.org/jira/browse/SPARK-24940)
## Why are the changes needed?
Make repartition hints consistent with repartition api .
## Does this PR introduce any user-facing change?
This pr intends to support quries below;
```
// SQL cases
- sql("SELECT /*+ REPARTITION(c) */ * FROM t")
- sql("SELECT /*+ REPARTITION(1, c) */ * FROM t")
- sql("SELECT /*+ REPARTITION_BY_RANGE(c) */ * FROM t")
- sql("SELECT /*+ REPARTITION_BY_RANGE(1, c) */ * FROM t")
```
## How was this patch tested?
UT
Closes#25464 from ulysses-you/SPARK-28746.
Lead-authored-by: ulysses <youxiduo@weidian.com>
Co-authored-by: ulysses <646303253@qq.com>
Signed-off-by: Takeshi Yamamuro <yamamuro@apache.org>
### What changes were proposed in this pull request?
In the PR, I propose to move all static methods from the `CalendarInterval` class to the `IntervalUtils` object. All those methods are rewritten from Java to Scala.
### Why are the changes needed?
- For consistency with other helper methods. Such methods were placed to the helper object `IntervalUtils`, see https://github.com/apache/spark/pull/26190
- Taking into account that `CalendarInterval` will be fully exposed to users in the future (see https://github.com/apache/spark/pull/25022), it would be nice to clean it up by moving service methods to an internal object.
### Does this PR introduce any user-facing change?
No
### How was this patch tested?
- By moved tests from `CalendarIntervalSuite` to `IntervalUtilsSuite`
- By existing test suites
Closes#26261 from MaxGekk/refactoring-calendar-interval.
Authored-by: Maxim Gekk <max.gekk@gmail.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
### What changes were proposed in this pull request?
Add AlterTableRecoverPartitionsStatement and make ALTER TABLE ... RECOVER PARTITIONS go through the same catalog/table resolution framework of v2 commands.
### Why are the changes needed?
It's important to make all the commands have the same table resolution behavior, to avoid confusing end-users. e.g.
```
USE my_catalog
DESC t // success and describe the table t from my_catalog
ALTER TABLE t RECOVER PARTITIONS // report table not found as there is no table t in the session catalog
```
### Does this PR introduce any user-facing change?
Yes. When running ALTER TABLE ... RECOVER PARTITIONS Spark fails the command if the current catalog is set to a v2 catalog, or the table name specified a v2 catalog.
### How was this patch tested?
Unit tests.
Closes#26269 from huaxingao/spark-29612.
Authored-by: Huaxin Gao <huaxing@us.ibm.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
### What changes were proposed in this pull request?
To push the built jars to maven release repository, we need to remove the 'SNAPSHOT' tag from the version name.
Made the following changes in this PR:
* Update all the `3.0.0-SNAPSHOT` version name to `3.0.0-preview`
* Update the PySpark version from `3.0.0.dev0` to `3.0.0`
**Please note those changes were generated by the release script in the past, but this time since we manually add tags on master branch, we need to manually apply those changes too.**
We shall revert the changes after 3.0.0-preview release passed.
### Why are the changes needed?
To make the maven release repository to accept the built jars.
### Does this PR introduce any user-facing change?
No
### How was this patch tested?
N/A
Closes#26243 from jiangxb1987/3.0.0-preview-prepare.
Lead-authored-by: Xingbo Jiang <xingbo.jiang@databricks.com>
Co-authored-by: HyukjinKwon <gurwls223@apache.org>
Signed-off-by: Xingbo Jiang <xingbo.jiang@databricks.com>
### What changes were proposed in this pull request?
This PR adds `DROP NAMESPACE` support for V2 catalogs.
### Why are the changes needed?
Currently, you cannot drop namespaces for v2 catalogs.
### Does this PR introduce any user-facing change?
The user can now perform the following:
```SQL
CREATE NAMESPACE mycatalog.ns
DROP NAMESPACE mycatalog.ns
SHOW NAMESPACES IN mycatalog # Will show no namespaces
```
to drop a namespace `ns` inside `mycatalog` V2 catalog.
### How was this patch tested?
Added unit tests.
Closes#26262 from imback82/drop_namespace.
Authored-by: Terry Kim <yuminkim@gmail.com>
Signed-off-by: Dongjoon Hyun <dhyun@apple.com>
### What changes were proposed in this pull request?
Add LoadDataStatement and make LOAD DATA INTO TABLE go through the same catalog/table resolution framework of v2 commands.
### Why are the changes needed?
It's important to make all the commands have the same table resolution behavior, to avoid confusing end-users. e.g.
```
USE my_catalog
DESC t // success and describe the table t from my_catalog
LOAD DATA INPATH 'filepath' INTO TABLE t // report table not found as there is no table t in the session catalog
```
### Does this PR introduce any user-facing change?
yes. When running LOAD DATA INTO TABLE, Spark fails the command if the current catalog is set to a v2 catalog, or the table name specified a v2 catalog.
### How was this patch tested?
Unit tests.
Closes#26178 from viirya/SPARK-29521.
Lead-authored-by: Liang-Chi Hsieh <liangchi@uber.com>
Co-authored-by: Liang-Chi Hsieh <viirya@gmail.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
### What changes were proposed in this pull request?
This pr is to fix wrong code to check parameter lengths of split methods in `subexpressionEliminationForWholeStageCodegen`.
### Why are the changes needed?
Bug fix.
### Does this PR introduce any user-facing change?
No.
### How was this patch tested?
Existing tests.
Closes#26267 from maropu/SPARK-29008-FOLLOWUP.
Authored-by: Takeshi Yamamuro <yamamuro@apache.org>
Signed-off-by: Dongjoon Hyun <dhyun@apple.com>
### What changes were proposed in this pull request?
The `DateTimeUtilsSuite` and `TimestampFormatterSuite` assume constant time difference between `timestamp'yesterday'`, `timestamp'today'` and `timestamp'tomorrow'` which is wrong on daylight switching day - day length can be 23 or 25 hours. In the PR, I propose to use Java 8 time API to calculate instances of `yesterday` and `tomorrow` timestamps.
### Why are the changes needed?
The changes fix test failures and make the tests tolerant to daylight time switching.
### Does this PR introduce any user-facing change?
No
### How was this patch tested?
By existing test suites `DateTimeUtilsSuite` and `TimestampFormatterSuite`.
Closes#26273 from MaxGekk/midnight-tolerant.
Authored-by: Maxim Gekk <max.gekk@gmail.com>
Signed-off-by: Dongjoon Hyun <dhyun@apple.com>
### What changes were proposed in this pull request?
```
hive> select version();
OK
3.1.1 rf4e0529634b6231a0072295da48af466cf2f10b7
Time taken: 2.113 seconds, Fetched: 1 row(s)
```
### Why are the changes needed?
From hive behavior and I guess it is useful for debugging and developing etc.
### Does this PR introduce any user-facing change?
add a misc func
### How was this patch tested?
add ut
Closes#26209 from yaooqinn/SPARK-29554.
Authored-by: Kent Yao <yaooqinn@hotmail.com>
Signed-off-by: Dongjoon Hyun <dhyun@apple.com>
### What changes were proposed in this pull request?
This is a follow-up of https://github.com/apache/spark/pull/24557 to fix `since` version.
### Why are the changes needed?
This is found during 3.0.0-preview preparation.
The version will be exposed to our SQL document like the following. We had better fix this.
- https://spark.apache.org/docs/latest/api/sql/#array_min
### Does this PR introduce any user-facing change?
Yes. It's exposed at `DESC FUNCTION EXTENDED` SQL command and SQL doc, but this is new at 3.0.0.
### How was this patch tested?
Manual.
```
spark-sql> DESC FUNCTION EXTENDED min_by;
Function: min_by
Class: org.apache.spark.sql.catalyst.expressions.aggregate.MinBy
Usage: min_by(x, y) - Returns the value of `x` associated with the minimum value of `y`.
Extended Usage:
Examples:
> SELECT min_by(x, y) FROM VALUES (('a', 10)), (('b', 50)), (('c', 20)) AS tab(x, y);
a
Since: 3.0.0
```
Closes#26264 from dongjoon-hyun/SPARK-27653.
Authored-by: Dongjoon Hyun <dhyun@apple.com>
Signed-off-by: Dongjoon Hyun <dhyun@apple.com>
### What changes were proposed in this pull request?
Add ShowCreateTableStatement and make SHOW CREATE TABLE go through the same catalog/table resolution framework of v2 commands.
### Why are the changes needed?
It's important to make all the commands have the same table resolution behavior, to avoid confusing end-users. e.g.
```
USE my_catalog
DESC t // success and describe the table t from my_catalog
SHOW CREATE TABLE t // report table not found as there is no table t in the session catalog
```
### Does this PR introduce any user-facing change?
yes. When running SHOW CREATE TABLE, Spark fails the command if the current catalog is set to a v2 catalog, or the table name specified a v2 catalog.
### How was this patch tested?
Unit tests.
Closes#26184 from viirya/SPARK-29527.
Lead-authored-by: Liang-Chi Hsieh <liangchi@uber.com>
Co-authored-by: Liang-Chi Hsieh <viirya@gmail.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
### What changes were proposed in this pull request?
Add UncacheTableStatement and make UNCACHE TABLE go through the same catalog/table resolution framework of v2 commands.
### Why are the changes needed?
It's important to make all the commands have the same table resolution behavior, to avoid confusing end-users. e.g.
```
USE my_catalog
DESC t // success and describe the table t from my_catalog
UNCACHE TABLE t // report table not found as there is no table t in the session catalog
```
### Does this PR introduce any user-facing change?
yes. When running UNCACHE TABLE, Spark fails the command if the current catalog is set to a v2 catalog, or the table name specified a v2 catalog.
### How was this patch tested?
New unit tests
Closes#26237 from imback82/uncache_table.
Authored-by: Terry Kim <yuminkim@gmail.com>
Signed-off-by: Dongjoon Hyun <dhyun@apple.com>
# What changes were proposed in this pull request?
Add description for ignoreNullFields, which is commited in #26098 , in DataFrameWriter and readwriter.py.
Enable user to use ignoreNullFields in pyspark.
### Does this PR introduce any user-facing change?
No
### How was this patch tested?
run unit tests
Closes#26227 from stczwd/json-generator-doc.
Authored-by: stczwd <qcsd2011@163.com>
Signed-off-by: Dongjoon Hyun <dhyun@apple.com>
### What changes were proposed in this pull request?
Only use antlr4 to parse the interval string, and remove the duplicated parsing logic from `CalendarInterval`.
### Why are the changes needed?
Simplify the code and fix inconsistent behaviors.
### Does this PR introduce any user-facing change?
No
### How was this patch tested?
Pass the Jenkins with the updated test cases.
Closes#26190 from cloud-fan/parser.
Lead-authored-by: Wenchen Fan <wenchen@databricks.com>
Co-authored-by: Dongjoon Hyun <dongjoon@apache.org>
Signed-off-by: Dongjoon Hyun <dhyun@apple.com>
### What changes were proposed in this pull request?
Recent timezone definition changes in very new JDK 8 (and beyond) releases cause test failures. The below was observed on JDK 1.8.0_232. As before, the easy fix is to allow for these inconsequential variations in test results due to differing definition of timezones.
### Why are the changes needed?
Keeps test passing on the latest JDK releases.
### Does this PR introduce any user-facing change?
None
### How was this patch tested?
Existing tests
Closes#26236 from srowen/SPARK-29578.
Authored-by: Sean Owen <sean.owen@databricks.com>
Signed-off-by: Sean Owen <sean.owen@databricks.com>
### What changes were proposed in this pull request?
Support SparkSQL use iN/EXISTS with subquery in JOIN condition.
### Why are the changes needed?
Support SQL use iN/EXISTS with subquery in JOIN condition.
### Does this PR introduce any user-facing change?
This PR is for enable user use subquery in `JOIN`'s ON condition. such as we have create three table
```
CREATE TABLE A(id String);
CREATE TABLE B(id String);
CREATE TABLE C(id String);
```
we can do query like :
```
SELECT A.id from A JOIN B ON A.id = B.id and A.id IN (select C.id from C)
```
### How was this patch tested?
ADDED UT
Closes#25854 from AngersZhuuuu/SPARK-29145.
Lead-authored-by: angerszhu <angers.zhu@gmail.com>
Co-authored-by: AngersZhuuuu <angers.zhu@gmail.com>
Signed-off-by: Takeshi Yamamuro <yamamuro@apache.org>
### What changes were proposed in this pull request?
Reimplement the iterator in UnsafeExternalRowSorter in database style. This can be done by reusing the `RowIterator` in our code base.
### Why are the changes needed?
During the job in #26164, after involving a var `isReleased` in `hasNext`, there's possible that `isReleased` is false when calling `hasNext`, but it becomes true before calling `next`. A safer way is using database-style iterator: `advanceNext` and `getRow`.
### Does this PR introduce any user-facing change?
No.
### How was this patch tested?
Existing UT.
Closes#26229 from xuanyuanking/SPARK-21492-follow-up.
Authored-by: Yuanjian Li <xyliyuanjian@gmail.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
### What changes were proposed in this pull request?
Add CacheTableStatement and make CACHE TABLE go through the same catalog/table resolution framework of v2 commands.
### Why are the changes needed?
It's important to make all the commands have the same table resolution behavior, to avoid confusing end-users. e.g.
```
USE my_catalog
DESC t // success and describe the table t from my_catalog
CACHE TABLE t // report table not found as there is no table t in the session catalog
```
### Does this PR introduce any user-facing change?
yes. When running CACHE TABLE, Spark fails the command if the current catalog is set to a v2 catalog, or the table name specified a v2 catalog.
### How was this patch tested?
Unit tests.
Closes#26179 from viirya/SPARK-29522.
Lead-authored-by: Liang-Chi Hsieh <viirya@gmail.com>
Co-authored-by: Liang-Chi Hsieh <liangchi@uber.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
### What changes were proposed in this pull request?
Add RefreshTableStatement and make REFRESH TABLE go through the same catalog/table resolution framework of v2 commands.
### Why are the changes needed?
It's important to make all the commands have the same table resolution behavior, to avoid confusing end-users. e.g.
```
USE my_catalog
DESC t // success and describe the table t from my_catalog
REFRESH TABLE t // report table not found as there is no table t in the session catalog
```
### Does this PR introduce any user-facing change?
yes. When running REFRESH TABLE, Spark fails the command if the current catalog is set to a v2 catalog, or the table name specified a v2 catalog.
### How was this patch tested?
New unit tests
Closes#26183 from imback82/refresh_table.
Lead-authored-by: Terry Kim <yuminkim@gmail.com>
Co-authored-by: Terry Kim <terryk@terrys-mbp-2.lan>
Signed-off-by: Liang-Chi Hsieh <liangchi@uber.com>
### What changes were proposed in this pull request?
As described in [SPARK-29542](https://issues.apache.org/jira/browse/SPARK-29542) , the descriptions of `spark.sql.files.*` are confused.
In this PR, I make their descriptions be clearly.
### Why are the changes needed?
It makes the descriptions of `spark.sql.files.*` be clearly.
### Does this PR introduce any user-facing change?
No.
### How was this patch tested?
Existing UT.
Closes#26200 from turboFei/SPARK-29542-partition-maxSize.
Authored-by: turbofei <fwang12@ebay.com>
Signed-off-by: HyukjinKwon <gurwls223@apache.org>
### What changes were proposed in this pull request?
This PR adds `CREATE NAMESPACE` support for V2 catalogs.
### Why are the changes needed?
Currently, you cannot explicitly create namespaces for v2 catalogs.
### Does this PR introduce any user-facing change?
The user can now perform the following:
```SQL
CREATE NAMESPACE mycatalog.ns
```
to create a namespace `ns` inside `mycatalog` V2 catalog.
### How was this patch tested?
Added unit tests.
Closes#26166 from imback82/create_namespace.
Authored-by: Terry Kim <yuminkim@gmail.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
### What changes were proposed in this pull request?
Add ShowPartitionsStatement and make SHOW PARTITIONS go through the same catalog/table resolution framework of v2 commands.
### Why are the changes needed?
It's important to make all the commands have the same table resolution behavior, to avoid confusing end-users.
### Does this PR introduce any user-facing change?
Yes. When running SHOW PARTITIONS, Spark fails the command if the current catalog is set to a v2 catalog, or the table name specified a v2 catalog.
### How was this patch tested?
Unit tests.
Closes#26198 from huaxingao/spark-29539.
Authored-by: Huaxin Gao <huaxing@us.ibm.com>
Signed-off-by: Liang-Chi Hsieh <liangchi@uber.com>
### What changes were proposed in this pull request?
Add TruncateTableStatement and make TRUNCATE TABLE go through the same catalog/table resolution framework of v2 commands.
### Why are the changes needed?
It's important to make all the commands have the same table resolution behavior, to avoid confusing end-users. e.g.
```
USE my_catalog
DESC t // success and describe the table t from my_catalog
TRUNCATE TABLE t // report table not found as there is no table t in the session catalog
```
### Does this PR introduce any user-facing change?
yes. When running TRUNCATE TABLE, Spark fails the command if the current catalog is set to a v2 catalog, or the table name specified a v2 catalog.
### How was this patch tested?
Unit tests.
Closes#26174 from viirya/SPARK-29517.
Authored-by: Liang-Chi Hsieh <viirya@gmail.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
### What changes were proposed in this pull request?
This PR remove unnecessary orc version and hive version in doc.
### Does this PR introduce any user-facing change?
No.
### How was this patch tested?
N/A.
Closes#26146 from denglingang/SPARK-24576.
Lead-authored-by: denglingang <chitin1027@gmail.com>
Co-authored-by: HyukjinKwon <gurwls223@apache.org>
Signed-off-by: HyukjinKwon <gurwls223@apache.org>
### What changes were proposed in this pull request?
As I have comment in [SPARK-29516](https://github.com/apache/spark/pull/26172#issuecomment-544364977)
SparkSession.sql() method parse process not under current sparksession's conf, so some configuration about parser is not valid in multi-thread situation.
In this pr, we add a SQLConf parameter to AbstractSqlParser and initial it with SessionState's conf.
Then for each SparkSession's parser process. It will use's it's own SessionState's SQLConf and to be thread safe
### Why are the changes needed?
Fix bug
### Does this PR introduce any user-facing change?
NO
### How was this patch tested?
NO
Closes#26187 from AngersZhuuuu/SPARK-29530.
Authored-by: angerszhu <angers.zhu@gmail.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
### What changes were proposed in this pull request?
```
bit_and(expression) -- The bitwise AND of all non-null input values, or null if none
bit_or(expression) -- The bitwise OR of all non-null input values, or null if none
```
More details:
https://www.postgresql.org/docs/9.3/functions-aggregate.html
### Why are the changes needed?
Postgres, Mysql and many other popular db support them.
### Does this PR introduce any user-facing change?
add two bit agg
### How was this patch tested?
add ut
Closes#26155 from yaooqinn/SPARK-27879.
Authored-by: Kent Yao <yaooqinn@hotmail.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
### What changes were proposed in this pull request?
Add RepairTableStatement and make REPAIR TABLE go through the same catalog/table resolution framework of v2 commands.
### Why are the changes needed?
It's important to make all the commands have the same table resolution behavior, to avoid confusing end-users. e.g.
```
USE my_catalog
DESC t // success and describe the table t from my_catalog
MSCK REPAIR TABLE t // report table not found as there is no table t in the session catalog
```
### Does this PR introduce any user-facing change?
yes. When running MSCK REPAIR TABLE, Spark fails the command if the current catalog is set to a v2 catalog, or the table name specified a v2 catalog.
### How was this patch tested?
New unit tests
Closes#26168 from imback82/repair_table.
Authored-by: Terry Kim <yuminkim@gmail.com>
Signed-off-by: Liang-Chi Hsieh <liangchi@uber.com>
### What changes were proposed in this pull request?
This is a followup of https://github.com/apache/spark/pull/25241 .
The typed interval expression should fail for invalid format.
### Why are the changes needed?
Te be consistent with the typed timestamp/date expression
### Does this PR introduce any user-facing change?
Yes. But this feature is not released yet.
### How was this patch tested?
updated test
Closes#26151 from cloud-fan/bug.
Authored-by: Wenchen Fan <wenchen@databricks.com>
Signed-off-by: Yuming Wang <wgyumg@gmail.com>
### What changes were proposed in this pull request?
* Adding an additional check in `stringToTimestamp` to handle cases where the input has trailing ':'
* Added a test to make sure this works.
### Why are the changes needed?
In a couple of scenarios while converting from String to Timestamp `DateTimeUtils.stringToTimestamp` throws an array out of bounds exception if there is trailing ':'. The behavior of this method requires it to return `None` in case the format of the string is incorrect.
### Does this PR introduce any user-facing change?
No
### How was this patch tested?
Added a test in the `DateTimeTestUtils` suite to test if my fix works.
Closes#26143 from rahulsmahadev/SPARK-29494.
Lead-authored-by: Rahul Mahadev <rahul.mahadev@databricks.com>
Co-authored-by: Rahul Shivu Mahadev <51690557+rahulsmahadev@users.noreply.github.com>
Signed-off-by: Sean Owen <sean.owen@databricks.com>
### What changes were proposed in this pull request?
The `date_part()` function can accept the `source` parameter of the `INTERVAL` type (`CalendarIntervalType`). The following values of the `field` parameter are supported:
- `"MILLENNIUM"` (`"MILLENNIA"`, `"MIL"`, `"MILS"`) - number of millenniums in the given interval. It is `YEAR / 1000`.
- `"CENTURY"` (`"CENTURIES"`, `"C"`, `"CENT"`) - number of centuries in the interval calculated as `YEAR / 100`.
- `"DECADE"` (`"DECADES"`, `"DEC"`, `"DECS"`) - decades in the `YEAR` part of the interval calculated as `YEAR / 10`.
- `"YEAR"` (`"Y"`, `"YEARS"`, `"YR"`, `"YRS"`) - years in a values of `CalendarIntervalType`. It is `MONTHS / 12`.
- `"QUARTER"` (`"QTR"`) - a quarter of year calculated as `MONTHS / 3 + 1`
- `"MONTH"` (`"MON"`, `"MONS"`, `"MONTHS"`) - the months part of the interval calculated as `CalendarInterval.months % 12`
- `"DAY"` (`"D"`, `"DAYS"`) - total number of days in `CalendarInterval.microseconds`
- `"HOUR"` (`"H"`, `"HOURS"`, `"HR"`, `"HRS"`) - the hour part of the interval.
- `"MINUTE"` (`"M"`, `"MIN"`, `"MINS"`, `"MINUTES"`) - the minute part of the interval.
- `"SECOND"` (`"S"`, `"SEC"`, `"SECONDS"`, `"SECS"`) - the seconds part with fractional microsecond part.
- `"MILLISECONDS"` (`"MSEC"`, `"MSECS"`, `"MILLISECON"`, `"MSECONDS"`, `"MS"`) - the millisecond part of the interval with fractional microsecond part.
- `"MICROSECONDS"` (`"USEC"`, `"USECS"`, `"USECONDS"`, `"MICROSECON"`, `"US"`) - the total number of microseconds in the `second`, `millisecond` and `microsecond` parts of the given interval.
- `"EPOCH"` - the total number of seconds in the interval including the fractional part with microsecond precision. Here we assume 365.25 days per year (leap year every four years).
For example:
```sql
> SELECT date_part('days', interval 1 year 10 months 5 days);
5
> SELECT date_part('seconds', interval 30 seconds 1 milliseconds 1 microseconds);
30.001001
```
### Why are the changes needed?
To maintain feature parity with PostgreSQL (https://www.postgresql.org/docs/11/functions-datetime.html#FUNCTIONS-DATETIME-EXTRACT)
### Does this PR introduce any user-facing change?
No
### How was this patch tested?
- Added new test suite `IntervalExpressionsSuite`
- Add new test cases to `date_part.sql`
Closes#25981 from MaxGekk/extract-from-intervals.
Authored-by: Maxim Gekk <max.gekk@gmail.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
### What changes were proposed in this pull request?
The handling of the catalog across plans should be as follows ([SPARK-29014](https://issues.apache.org/jira/browse/SPARK-29014)):
* The *current* catalog should be used when no catalog is specified
* The default catalog is the catalog *current* is initialized to
* If the *default* catalog is not set, then *current* catalog is the built-in Spark session catalog.
This PR addresses the issue where *current* catalog usage is not followed as describe above.
### Why are the changes needed?
It is a bug as described in the previous section.
### Does this PR introduce any user-facing change?
No.
### How was this patch tested?
Unit tests added.
Closes#26120 from imback82/cleanup_catalog.
Authored-by: Terry Kim <yuminkim@gmail.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
### What changes were proposed in this pull request?
Add `AnalyzeTableStatement` and `AnalyzeColumnStatement`, and make ANALYZE TABLE go through the same catalog/table resolution framework of v2 commands.
### Why are the changes needed?
It's important to make all the commands have the same table resolution behavior, to avoid confusing end-users. e.g.
```
USE my_catalog
DESC t // success and describe the table t from my_catalog
ANALYZE TABLE t // report table not found as there is no table t in the session catalog
```
### Does this PR introduce any user-facing change?
yes. When running ANALYZE TABLE, Spark fails the command if the current catalog is set to a v2 catalog, or the table name specified a v2 catalog.
### How was this patch tested?
new tests
Closes#26129 from cloud-fan/analyze-table.
Authored-by: Wenchen Fan <wenchen@databricks.com>
Signed-off-by: Gengliang Wang <gengliang.wang@databricks.com>
### Why are the changes needed?
As mentioned in jira, sometimes we need to be able to support the retention of null columns when writing JSON.
For example, sparkmagic(used widely in jupyter with livy) will generate sql query results based on DataSet.toJSON and parse JSON to pandas DataFrame to display. If there is a null column, it is easy to have some column missing or even the query result is empty. The loss of the null column in the first row, may cause parsing exceptions or loss of entire column data.
### Does this PR introduce any user-facing change?
Example in spark-shell.
scala> spark.sql("select null as a, 1 as b").toJSON.collect.foreach(println)
{"b":1}
scala> spark.sql("set spark.sql.jsonGenerator.struct.ignore.null=false")
res2: org.apache.spark.sql.DataFrame = [key: string, value: string]
scala> spark.sql("select null as a, 1 as b").toJSON.collect.foreach(println)
{"a":null,"b":1}
### How was this patch tested?
Add new test to JacksonGeneratorSuite
Closes#26098 from stczwd/json.
Lead-authored-by: stczwd <qcsd2011@163.com>
Co-authored-by: Jackey Lee <qcsd2011@163.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
### What changes were proposed in this pull request?
1. Regularize all the shuffle configurations related to adaptive execution.
2. Add default value for `BlockStoreShuffleReader.shouldBatchFetch`.
### Why are the changes needed?
It's a follow-up PR for #26040.
Regularize the existing `spark.sql.adaptive.shuffle` namespace in SQLConf.
### Does this PR introduce any user-facing change?
Rename one released user config `spark.sql.adaptive.minNumPostShufflePartitions` to `spark.sql.adaptive.shuffle.minNumPostShufflePartitions`, other changed configs is not released yet.
### How was this patch tested?
Existing UT.
Closes#26147 from xuanyuanking/SPARK-9853.
Authored-by: Yuanjian Li <xyliyuanjian@gmail.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
### What changes were proposed in this pull request?
This PR proposes a few typos:
1. Sparks => Spark's
2. parallize => parallelize
3. doesnt => doesn't
Closes#26140 from plusplusjiajia/fix-typos.
Authored-by: Jiajia Li <jiajia.li@intel.com>
Signed-off-by: Sean Owen <sean.owen@databricks.com>
### What changes were proposed in this pull request?
BIT_COUNT(N) - Returns the number of bits that are set in the argument N as an unsigned 64-bit integer, or NULL if the argument is NULL
### Why are the changes needed?
Supported by MySQL，Microsoft SQL Server ，etc.
### Does this PR introduce any user-facing change?
add a built-in function
### How was this patch tested?
add uts
Closes#26139 from yaooqinn/SPARK-29491.
Authored-by: Kent Yao <yaooqinn@hotmail.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
This PR takes over #19788. After we split the shuffle fetch protocol from `OpenBlock` in #24565, this optimization can be extended in the new shuffle protocol. Credit to yucai, closes#19788.
### What changes were proposed in this pull request?
This PR adds the support for continuous shuffle block fetching in batch:
- Shuffle client changes:
- Add new feature tag `spark.shuffle.fetchContinuousBlocksInBatch`, implement the decision logic in `BlockStoreShuffleReader`.
- Merge the continuous shuffle block ids in batch if needed in ShuffleBlockFetcherIterator.
- Shuffle server changes:
- Add support in `ExternalBlockHandler` for the external shuffle service side.
- Make `ShuffleBlockResolver.getBlockData` accept getting block data by range.
- Protocol changes:
- Add new block id type `ShuffleBlockBatchId` represent continuous shuffle block ids.
- Extend `FetchShuffleBlocks` and `OneForOneBlockFetcher`.
- After the new shuffle fetch protocol completed in #24565, the backward compatibility for external shuffle service can be controlled by `spark.shuffle.useOldFetchProtocol`.
### Why are the changes needed?
In adaptive execution, one reducer may fetch multiple continuous shuffle blocks from one map output file. However, as the original approach, each reducer needs to fetch those 10 reducer blocks one by one. This way needs many IO and impacts performance. This PR is to support fetching those continuous shuffle blocks in one IO (batch way). See below example:
The shuffle block is stored like below:
The ShuffleId format is s"shuffle_$shuffleId_$mapId_$reduceId", referring to BlockId.scala.
In adaptive execution, one reducer may want to read output for reducer 5 to 14, whose block Ids are from shuffle_0_x_5 to shuffle_0_x_14.
Before this PR, Spark needs 10 disk IOs + 10 network IOs for each output file.
After this PR, Spark only needs 1 disk IO and 1 network IO. This way can reduce IO dramatically.
### Does this PR introduce any user-facing change?
No.
### How was this patch tested?
Add new UT.
Integrate test with setting `spark.sql.adaptive.enabled=true`.
Closes#26040 from xuanyuanking/SPARK-9853.
Lead-authored-by: Yuanjian Li <xyliyuanjian@gmail.com>
Co-authored-by: yucai <yyu1@ebay.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
### What changes were proposed in this pull request?
bool_or(x) <=> any/some(x) <=> max(x)
bool_and(x) <=> every(x) <=> min(x)
Args:
x: boolean
### Why are the changes needed?
PostgreSQL, Presto and Vertica, etc also support this feature:
### Does this PR introduce any user-facing change?
add new functions support
### How was this patch tested?
add ut
Closes#26126 from yaooqinn/SPARK-27880.
Authored-by: Kent Yao <yaooqinn@hotmail.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
### What changes were proposed in this pull request?
Proposed new expression `SubtractDates` which is used in `date1` - `date2`. It has the `INTERVAL` type, and returns the interval from `date1` (inclusive) and `date2` (exclusive). For example:
```sql
> select date'tomorrow' - date'yesterday';
interval 2 days
```
Closes#26034
### Why are the changes needed?
- To conform the SQL standard which states the result type of `date operand 1` - `date operand 2` must be the interval type. See [4.5.3 Operations involving datetimes and intervals](http://www.contrib.andrew.cmu.edu/~shadow/sql/sql1992.txt).
- Improve Spark SQL UX and allow mixing date and timestamp in subtractions. For example: `select timestamp'now' + (date'2019-10-01' - date'2019-09-15')`
### Does this PR introduce any user-facing change?
Before the query below returns number of days:
```sql
spark-sql> select date'2019-10-05' - date'2018-09-01';
399
```
After it returns an interval:
```sql
spark-sql> select date'2019-10-05' - date'2018-09-01';
interval 1 years 1 months 4 days
```
### How was this patch tested?
- by new tests in `DateExpressionsSuite` and `TypeCoercionSuite`.
- by existing tests in `date.sql`
Closes#26112 from MaxGekk/date-subtract.
Authored-by: Maxim Gekk <max.gekk@gmail.com>
Signed-off-by: Yuming Wang <wgyumg@gmail.com>
### What changes were proposed in this pull request?
Change Literal.sql to output CAST('fpValue' AS FLOAT) instead of CAST(fpValue AS FLOAT) as the SQL for a floating point literal.
### Why are the changes needed?
The old version doesn't work for very small floating point numbers; the value will fail to parse if it doesn't fit in a DECIMAL(38).
This doesn't apply to doubles because they have special literal syntax.
### Does this PR introduce any user-facing change?
Not really.
### How was this patch tested?
New unit tests.
Closes#26114 from jose-torres/fpliteral.
Authored-by: Jose Torres <joseph.torres@databricks.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
Updating univocity-parsers version to 2.8.3, which adds support for multiple character delimiters
Moving univocity-parsers version to spark-parent pom dependencyManagement section
Adding new utility method to build multi-char delimiter string, which delegates to existing one
Adding tests for multiple character delimited CSV
### What changes were proposed in this pull request?
Adds support for parsing CSV data using multiple-character delimiters. Existing logic for converting the input delimiter string to characters was kept and invoked in a loop. Project dependencies were updated to remove redundant declaration of `univocity-parsers` version, and also to change that version to the latest.
### Why are the changes needed?
It is quite common for people to have delimited data, where the delimiter is not a single character, but rather a sequence of characters. Currently, it is difficult to handle such data in Spark (typically needs pre-processing).
### Does this PR introduce any user-facing change?
Yes. Specifying the "delimiter" option for the DataFrame read, and providing more than one character, will no longer result in an exception. Instead, it will be converted as before and passed to the underlying library (Univocity), which has accepted multiple character delimiters since 2.8.0.
### How was this patch tested?
The `CSVSuite` tests were confirmed passing (including new methods), and `sbt` tests for `sql` were executed.
Closes#26027 from jeff303/SPARK-24540.
Authored-by: Jeff Evans <jeffrey.wayne.evans@gmail.com>
Signed-off-by: Sean Owen <sean.owen@databricks.com>
### What changes were proposed in this pull request?
When inserting a value into a column with the different data type, Spark performs type coercion. Currently, we support 3 policies for the store assignment rules: ANSI, legacy and strict, which can be set via the option "spark.sql.storeAssignmentPolicy":
1. ANSI: Spark performs the type coercion as per ANSI SQL. In practice, the behavior is mostly the same as PostgreSQL. It disallows certain unreasonable type conversions such as converting `string` to `int` and `double` to `boolean`. It will throw a runtime exception if the value is out-of-range(overflow).
2. Legacy: Spark allows the type coercion as long as it is a valid `Cast`, which is very loose. E.g., converting either `string` to `int` or `double` to `boolean` is allowed. It is the current behavior in Spark 2.x for compatibility with Hive. When inserting an out-of-range value to a integral field, the low-order bits of the value is inserted(the same as Java/Scala numeric type casting). For example, if 257 is inserted to a field of Byte type, the result is 1.
3. Strict: Spark doesn't allow any possible precision loss or data truncation in store assignment, e.g., converting either `double` to `int` or `decimal` to `double` is allowed. The rules are originally for Dataset encoder. As far as I know, no mainstream DBMS is using this policy by default.
Currently, the V1 data source uses "Legacy" policy by default, while V2 uses "Strict". This proposal is to use "ANSI" policy by default for both V1 and V2 in Spark 3.0.
### Why are the changes needed?
Following the ANSI SQL standard is most reasonable among the 3 policies.
### Does this PR introduce any user-facing change?
Yes.
The default store assignment policy is ANSI for both V1 and V2 data sources.
### How was this patch tested?
Unit test
Closes#26107 from gengliangwang/ansiPolicyAsDefault.
Authored-by: Gengliang Wang <gengliang.wang@databricks.com>
Signed-off-by: Dongjoon Hyun <dhyun@apple.com>
## What changes were proposed in this pull request?
Implement a rule in the new adaptive execution framework introduced in [SPARK-23128](https://issues.apache.org/jira/browse/SPARK-23128). This rule is used to optimize the shuffle reader to local shuffle reader when smj is converted to bhj in adaptive execution.
## How was this patch tested?
Existing tests
Closes#25295 from JkSelf/localShuffleOptimization.
Authored-by: jiake <ke.a.jia@intel.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
### What changes were proposed in this pull request?
move the statement logical plans that were created for v2 commands to a new file `statements.scala`, under the same package of `v2Commands.scala`.
This PR also includes some minor cleanups:
1. remove `private[sql]` from `ParsedStatement` as it's in the private package.
2. remove unnecessary override of `output` and `children`.
3. add missing classdoc.
### Why are the changes needed?
Similar to https://github.com/apache/spark/pull/26111 , this is to better organize the logical plans of data source v2.
It's a bit weird to put the statements in the package `org.apache.spark.sql.catalyst.plans.logical.sql` as `sql` is not a good sub-package name in Spark SQL.
### Does this PR introduce any user-facing change?
no
### How was this patch tested?
existing tests
Closes#26125 from cloud-fan/statement.
Authored-by: Wenchen Fan <wenchen@databricks.com>
Signed-off-by: HyukjinKwon <gurwls223@apache.org>
### What changes were proposed in this pull request?
Refine the document of v2 session catalog config, to clearly explain what it is, when it should be used and how to implement it.
### Why are the changes needed?
Make this config more understandable
### Does this PR introduce any user-facing change?
No
### How was this patch tested?
Pass the Jenkins with the newly updated test cases.
Closes#26071 from cloud-fan/config.
Authored-by: Wenchen Fan <wenchen@databricks.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
### What changes were proposed in this pull request?
This PR adds JSON serialization for Spark external Rows.
### Why are the changes needed?
This is to be used for observable metrics where the `StreamingQueryProgress` contains a map of observed metrics rows which needs to be serialized in some cases.
### Does this PR introduce any user-facing change?
Yes, a user can call `toJson` on rows returned when collecting a DataFrame to the driver.
### How was this patch tested?
Added a new test suite: `RowJsonSuite` that should test this.
Closes#26013 from hvanhovell/SPARK-29347.
Authored-by: herman <herman@databricks.com>
Signed-off-by: herman <herman@databricks.com>
### What changes were proposed in this pull request?
move the v2 command logical plans from `basicLogicalOperators.scala` to a new file `v2Commands.scala`
### Why are the changes needed?
As we keep adding v2 commands, the `basicLogicalOperators.scala` grows bigger and bigger. It's better to have a separated file for them.
### Does this PR introduce any user-facing change?
no
### How was this patch tested?
not needed
Closes#26111 from cloud-fan/command.
Authored-by: Wenchen Fan <wenchen@databricks.com>
Signed-off-by: Dongjoon Hyun <dhyun@apple.com>
### What changes were proposed in this pull request?
In the PR, I propose to move interval parsing to `CalendarInterval.fromCaseInsensitiveString()` which throws an `IllegalArgumentException` for invalid strings, and reuse it from `CalendarInterval.fromString()`. The former one handles `IllegalArgumentException` only and returns `NULL` for invalid interval strings. This will allow to support interval strings without the `interval` prefix in casting strings to intervals and in interval type constructor because they use `fromString()` for parsing string intervals.
For example:
```sql
spark-sql> select cast('1 year 10 days' as interval);
interval 1 years 1 weeks 3 days
spark-sql> SELECT INTERVAL '1 YEAR 10 DAYS';
interval 1 years 1 weeks 3 days
```
### Why are the changes needed?
To maintain feature parity with PostgreSQL which supports interval strings without prefix:
```sql
# select interval '2 months 1 microsecond';
interval
------------------------
2 mons 00:00:00.000001
```
and to improve Spark SQL UX.
### Does this PR introduce any user-facing change?
Yes, previously parsing of interval strings without `interval` gives `NULL`:
```sql
spark-sql> select interval '2 months 1 microsecond';
NULL
```
After:
```sql
spark-sql> select interval '2 months 1 microsecond';
interval 2 months 1 microseconds
```
### How was this patch tested?
- Added new tests to `CalendarIntervalSuite.java`
- A test for casting strings to intervals in `CastSuite`
- Test for interval type constructor from strings in `ExpressionParserSuite`
Closes#26079 from MaxGekk/interval-str-without-prefix.
Authored-by: Maxim Gekk <max.gekk@gmail.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
### What changes were proposed in this pull request?
Currently, `SHOW NAMESPACES` and `SHOW DATABASES` are separate code paths. This PR merges two implementations.
### Why are the changes needed?
To remove code/behavior duplication
### Does this PR introduce any user-facing change?
No
### How was this patch tested?
Added new unit tests.
Closes#26006 from imback82/combine_show.
Authored-by: Terry Kim <yuminkim@gmail.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
### What changes were proposed in this pull request?
Revert this commit 18b7ad2fc5.
### Why are the changes needed?
See https://github.com/apache/spark/pull/16304#discussion_r92753590
### Does this PR introduce any user-facing change?
Yes
### How was this patch tested?
There is no test for that.
Closes#26101 from MaxGekk/revert-mean-seconds-per-month.
Authored-by: Maxim Gekk <max.gekk@gmail.com>
Signed-off-by: Sean Owen <sean.owen@databricks.com>
### What changes were proposed in this pull request?
Update ANSI mode related config names in comments as "spark.sql.ansi.enabled"
### Why are the changes needed?
The removed configuration `spark.sql.parser.ansi.enabled` and `spark.sql.failOnIntegralTypeOverflow` still exist in code comments.
### Does this PR introduce any user-facing change?
No
### How was this patch tested?
Grep the whole code to ensure the remove config names no longer exist.
```
git grep "parser.ansi.enabled"
git grep failOnIntegralTypeOverflow
git grep decimalOperationsNullOnOverflow
git grep ANSI_SQL_PARSER
git grep FAIL_ON_INTEGRAL_TYPE_OVERFLOW
git grep DECIMAL_OPERATIONS_NULL_ON_OVERFLOW
```
Closes#26067 from gengliangwang/spark-28989-followup.
Authored-by: Gengliang Wang <gengliang.wang@databricks.com>
Signed-off-by: Dongjoon Hyun <dhyun@apple.com>
### What changes were proposed in this pull request?
Use `.sameElements` to compare (non-nested) arrays, as `Arrays.deep` is removed in 2.13 and wasn't the best way to do this in the first place.
### Why are the changes needed?
To compile with 2.13.
### Does this PR introduce any user-facing change?
None.
### How was this patch tested?
Existing tests.
Closes#26073 from srowen/SPARK-29416.
Authored-by: Sean Owen <sean.owen@databricks.com>
Signed-off-by: Dongjoon Hyun <dhyun@apple.com>
### What changes were proposed in this pull request?
Replace `Unit` with equivalent `()` where code refers to the `Unit` companion object.
### Why are the changes needed?
It doesn't compile otherwise in Scala 2.13.
- https://github.com/scala/scala/blob/v2.13.0/src/library/scala/Unit.scala#L30
### Does this PR introduce any user-facing change?
Should be no behavior change at all.
### How was this patch tested?
Existing tests.
Closes#26070 from srowen/SPARK-29411.
Authored-by: Sean Owen <sean.owen@databricks.com>
Signed-off-by: Dongjoon Hyun <dhyun@apple.com>
### What changes were proposed in this pull request?
This PR adds an accumulator that computes a global aggregate over a number of rows. A user can define an arbitrary number of aggregate functions which can be computed at the same time.
The accumulator uses the standard technique for implementing (interpreted) aggregation in Spark. It uses projections and manual updates for each of the aggregation steps (initialize buffer, update buffer with new input row, merge two buffers and compute the final result on the buffer). Note that two of the steps (update and merge) use the aggregation buffer both as input and output.
Accumulators do not have an explicit point at which they get serialized. A somewhat surprising side effect is that the buffers of a `TypedImperativeAggregate` go over the wire as-is instead of serializing them. The merging logic for `TypedImperativeAggregate` assumes that the input buffer contains serialized buffers, this is violated by the accumulator's implicit serialization. In order to get around this I have added `mergeBuffersObjects` method that merges two unserialized buffers to `TypedImperativeAggregate`.
### Why are the changes needed?
This is the mechanism we are going to use to implement observable metrics.
### Does this PR introduce any user-facing change?
No, not yet.
### How was this patch tested?
Added `AggregatingAccumulator` test suite.
Closes#26012 from hvanhovell/SPARK-29346.
Authored-by: herman <herman@databricks.com>
Signed-off-by: herman <herman@databricks.com>
### What changes were proposed in this pull request?
Syntax like `'foo` is deprecated in Scala 2.13. Replace usages with `Symbol("foo")`
### Why are the changes needed?
Avoids ~50 deprecation warnings when attempting to build with 2.13.
### Does this PR introduce any user-facing change?
None, should be no functional change at all.
### How was this patch tested?
Existing tests.
Closes#26061 from srowen/SPARK-29392.
Authored-by: Sean Owen <sean.owen@databricks.com>
Signed-off-by: Dongjoon Hyun <dhyun@apple.com>
### What changes were proposed in this pull request?
Beautify comment
### Why are the changes needed?
The config name now is pretty weird.
### Does this PR introduce any user-facing change?
No
### How was this patch tested?
No test.
Closes#26054 from wangshisan/SPARK-29189.
Authored-by: gwang3 <gwang3@ebay.com>
Signed-off-by: Dongjoon Hyun <dhyun@apple.com>
### What changes were proposed in this pull request?
Reimplement `org.apache.spark.sql.catalyst.util.QuantileSummaries#merge` and add a test-case showing the previous bug.
### Why are the changes needed?
The original Greenwald-Khanna paper, from which the algorithm behind `approxQuantile` was taken, does not cover how to merge the result of multiple parallel QuantileSummaries. The current implementation violates some invariants and therefore the effective error can be larger than the specified.
### Does this PR introduce any user-facing change?
Yes, for same cases, the results from `approxQuantile` (`percentile_approx` in SQL) will now be within the expected error margin. For example:
```scala
var values = (1 to 100).toArray
val all_quantiles = values.indices.map(i => (i+1).toDouble / values.length).toArray
for (n <- 0 until 5) {
var df = spark.sparkContext.makeRDD(values).toDF("value").repartition(5)
val all_answers = df.stat.approxQuantile("value", all_quantiles, 0.1)
val all_answered_ranks = all_answers.map(ans => values.indexOf(ans)).toArray
val error = all_answered_ranks.zipWithIndex.map({ case (answer, expected) => Math.abs(expected - answer) }).toArray
val max_error = error.max
print(max_error + "\n")
}
```
In the current build it returns:
```
16
12
10
11
17
```
I couldn't run the code with this patch applied to double check the implementation. Can someone please confirm it now outputs at most `10`, please?
### How was this patch tested?
A new unit test was added to uncover the previous bug.
Closes#26029 from sitegui/SPARK-29336.
Authored-by: Guilherme <sitegui@sitegui.com.br>
Signed-off-by: Sean Owen <sean.owen@databricks.com>
### What changes were proposed in this pull request?
Set the default value of the `spark.sql.legacy.sizeOfNull` config to `false`. That changes behavior of the `size()` function for `NULL`. The function will return `NULL` for `NULL` instead of `-1`.
### Why are the changes needed?
There is the agreement in the PR https://github.com/apache/spark/pull/21598#issuecomment-399695523 to change behavior in Spark 3.0.
### Does this PR introduce any user-facing change?
Yes.
Before:
```sql
spark-sql> select size(NULL);
-1
```
After:
```sql
spark-sql> select size(NULL);
NULL
```
### How was this patch tested?
By the `check outputs of expression examples` test in `SQLQuerySuite` which runs expression examples.
Closes#26051 from MaxGekk/sizeof-null-returns-null.
Authored-by: Maxim Gekk <max.gekk@gmail.com>
Signed-off-by: HyukjinKwon <gurwls223@apache.org>
### What changes were proposed in this pull request?
Add back the resolved logical plan for UPDATE TABLE. It was in https://github.com/apache/spark/pull/25626 before but was removed later.
### Why are the changes needed?
In https://github.com/apache/spark/pull/25626 , we decided to not add the update API in DS v2, but we still want to implement UPDATE for builtin source like JDBC. We should at least add the resolved logical plan.
### Does this PR introduce any user-facing change?
no, UPDATE is still not supported yet.
### How was this patch tested?
new tests.
Closes#26025 from cloud-fan/update.
Authored-by: Wenchen Fan <wenchen@databricks.com>
Signed-off-by: Xiao Li <gatorsmile@gmail.com>
### What changes were proposed in this pull request?
In our PROD env, we have a pure Spark cluster, I think this is also pretty common, where computation is separated from storage layer. In such deploy mode, data locality is never reachable.
And there are some configurations in Spark scheduler to reduce waiting time for data locality(e.g. "spark.locality.wait"). While, problem is that, in listing file phase, the location informations of all the files, with all the blocks inside each file, are all fetched from the distributed file system. Actually, in a PROD environment, a table can be so huge that even fetching all these location informations need take tens of seconds.
To improve such scenario, Spark need provide an option, where data locality can be totally ignored, all we need in the listing file phase are the files locations, without any block location informations.
### Why are the changes needed?
And we made a benchmark in our PROD env, after ignore the block locations, we got a pretty huge improvement.
Table Size | Total File Number | Total Block Number | List File Duration(With Block Location) | List File Duration(Without Block Location)
-- | -- | -- | -- | --
22.6T | 30000 | 120000 | 16.841s | 1.730s
28.8 T | 42001 | 148964 | 10.099s | 2.858s
3.4 T | 20000 | 20000 | 5.833s | 4.881s
### Does this PR introduce any user-facing change?
No.
### How was this patch tested?
Via ut.
Closes#25869 from wangshisan/SPARK-29189.
Authored-by: gwang3 <gwang3@ebay.com>
Signed-off-by: Imran Rashid <irashid@cloudera.com>
### What changes were proposed in this pull request?
In the PR, I propose to pass the `Pattern.CASE_INSENSITIVE` flag while compiling interval patterns in `CalendarInterval`. This makes casting string values to intervals case insensitive and tolerant to case of the `interval`, `year(s)`, `month(s)`, `week(s)`, `day(s)`, `hour(s)`, `minute(s)`, `second(s)`, `millisecond(s)` and `microsecond(s)`.
### Why are the changes needed?
There are at least 2 reasons:
- To maintain feature parity with PostgreSQL which is not sensitive to case:
```sql
# select cast('10 Days' as INTERVAL);
interval
----------
10 days
(1 row)
```
- Spark is tolerant to case of interval literals. Case insensitivity in casting should be convenient for Spark users.
```sql
spark-sql> SELECT INTERVAL 1 YEAR 1 WEEK;
interval 1 years 1 weeks
```
### Does this PR introduce any user-facing change?
Yes, current implementation produces `NULL` for `interval`, `year`, ... `microsecond` that are not in lower case.
Before:
```sql
spark-sql> SELECT CAST('INTERVAL 10 DAYS' as INTERVAL);
NULL
```
After:
```sql
spark-sql> SELECT CAST('INTERVAL 10 DAYS' as INTERVAL);
interval 1 weeks 3 days
```
### How was this patch tested?
- by new tests in `CalendarIntervalSuite.java`
- new test in `CastSuite`
Closes#26010 from MaxGekk/interval-case-insensitive.
Authored-by: Maxim Gekk <max.gekk@gmail.com>
Signed-off-by: Dongjoon Hyun <dhyun@apple.com>
### What changes were proposed in this pull request?
I introduced new constants `SECONDS_PER_MONTH` and `MILLIS_PER_MONTH`, and reused it in calculations of seconds/milliseconds per month. `SECONDS_PER_MONTH` is 2629746 because the average year of the Gregorian calendar is 365.2425 days long or 60 * 60 * 24 * 365.2425 = 31556952.0 = 12 * 2629746 seconds per year.
### Why are the changes needed?
Spark uses the proleptic Gregorian calendar (see https://issues.apache.org/jira/browse/SPARK-26651) in which the average year is 365.2425 days (see https://en.wikipedia.org/wiki/Gregorian_calendar) but existing implementation assumes 31 days per months or 12 * 31 = 372 days. That's far away from the the truth.
### Does this PR introduce any user-facing change?
Yes, the changes affect at least 3 methods in `GroupStateImpl`, `EventTimeWatermark` and `MonthsBetween`. For example, the `month_between()` function will return different result in some cases.
Before:
```sql
spark-sql> select months_between('2019-09-15', '1970-01-01');
596.4516129
```
After:
```sql
spark-sql> select months_between('2019-09-15', '1970-01-01');
596.45996838
```
### How was this patch tested?
By existing test suite `DateTimeUtilsSuite`, `DateFunctionsSuite` and `DateExpressionsSuite`.
Closes#25998 from MaxGekk/days-in-year.
Authored-by: Maxim Gekk <max.gekk@gmail.com>
Signed-off-by: Sean Owen <sean.owen@databricks.com>
### What changes were proposed in this pull request?
Added new rules to `TypeCoercion.DateTimeOperations` for the `Subtract` expression which is replaced by existing `TimestampDiff` expression if one of its parameter has the `DATE` type and another one is the `TIMESTAMP` type. The date argument is casted to timestamp.
### Why are the changes needed?
- To maintain feature parity with PostgreSQL which supports subtraction of a date from a timestamp and a timestamp from a date:
```sql
maxim=# select timestamp'now' - date'epoch';
?column?
----------------------------
18175 days 21:07:33.412875
(1 row)
maxim=# select date'2020-01-01' - timestamp'now';
?column?
-------------------------
86 days 02:52:00.945296
(1 row)
```
- To conform to the SQL standard which defines datetime subtraction as an interval.
### Does this PR introduce any user-facing change?
Yes, currently the queries bellow fails with the error:
```sql
spark-sql> select timestamp'now' - date'2019-10-01';
Error in query: cannot resolve '(TIMESTAMP('2019-10-06 21:05:07.234') - DATE '2019-10-01')' due to data type mismatch: differing types in '(TIMESTAMP('2019-10-06 21:05:07.234') - DATE '2019-10-01')' (timestamp and date).; line 1 pos 7;
'Project [unresolvedalias((1570385107234000 - 18170), None)]
+- OneRowRelation
```
after the changes:
```sql
spark-sql> select timestamp'now' - date'2019-10-01';
interval 5 days 21 hours 4 minutes 55 seconds 878 milliseconds
```
### How was this patch tested?
- Add new cases to the `rule for date/timestamp operations` test in `TypeCoercionSuite`
- by 2 new test in `datetime.sql`
Closes#26036 from MaxGekk/date-timestamp-subtract.
Authored-by: Maxim Gekk <max.gekk@gmail.com>
Signed-off-by: HyukjinKwon <gurwls223@apache.org>
### What changes were proposed in this pull request?
Added new expression `TimestampDiff` for timestamp subtractions. It accepts 2 timestamp expressions and returns another one of the `CalendarIntervalType`. While creating an instance of `CalendarInterval`, it initializes only the microsecond field by difference of the given timestamps in microseconds, and set the `months` field to zero. Also I added an rule for conversion `Subtract` to `TimestampDiff`, and enabled already ported test queries in `postgreSQL/timestamp.sql`.
### Why are the changes needed?
To maintain feature parity with PostgreSQL which allows to get timestamp difference:
```sql
# select timestamp'today' - timestamp'yesterday';
?column?
----------
1 day
(1 row)
```
### Does this PR introduce any user-facing change?
Yes, previously users got the following error from timestamp subtraction:
```sql
spark-sql> select timestamp'today' - timestamp'yesterday';
Error in query: cannot resolve '(TIMESTAMP('2019-10-04 00:00:00') - TIMESTAMP('2019-10-03 00:00:00'))' due to data type mismatch: '(TIMESTAMP('2019-10-04 00:00:00') - TIMESTAMP('2019-10-03 00:00:00'))' requires (numeric or interval) type, not timestamp; line 1 pos 7;
'Project [unresolvedalias((1570136400000000 - 1570050000000000), None)]
+- OneRowRelation
```
after the changes they should get an interval:
```sql
spark-sql> select timestamp'today' - timestamp'yesterday';
interval 1 days
```
### How was this patch tested?
- Added tests for `TimestampDiff` to `DateExpressionsSuite`
- By new test in `TypeCoercionSuite`.
- Enabled tests in `postgreSQL/timestamp.sql`.
Closes#26022 from MaxGekk/timestamp-diff.
Authored-by: Maxim Gekk <max.gekk@gmail.com>
Signed-off-by: Dongjoon Hyun <dhyun@apple.com>
### What changes were proposed in this pull request?
Currently we deal with different `ParsedStatement` in many places and write duplicated catalog/table lookup logic. In general the lookup logic is
1. try look up the catalog by name. If no such catalog, and default catalog is not set, convert `ParsedStatement` to v1 command like `ShowDatabasesCommand`. Otherwise, convert `ParsedStatement` to v2 command like `ShowNamespaces`.
2. try look up the table by name. If no such table, fail. If the table is a `V1Table`, convert `ParsedStatement` to v1 command like `CreateTable`. Otherwise, convert `ParsedStatement` to v2 command like `CreateV2Table`.
However, since the code is duplicated we don't apply this lookup logic consistently. For example, we forget to consider the v2 session catalog in several places.
This PR centralizes the catalog/table lookup logic by 3 rules.
1. `ResolveCatalogs` (in catalyst). This rule resolves v2 catalog from the multipart identifier in SQL statements, and convert the statement to v2 command if the resolved catalog is not session catalog. If the command needs to resolve the table (e.g. ALTER TABLE), put an `UnresolvedV2Table` in the command.
2. `ResolveTables` (in catalyst). It resolves `UnresolvedV2Table` to `DataSourceV2Relation`.
3. `ResolveSessionCatalog` (in sql/core). This rule is only effective if the resolved catalog is session catalog. For commands that don't need to resolve the table, this rule converts the statement to v1 command directly. Otherwise, it converts the statement to v1 command if the resolved table is v1 table, and convert to v2 command if the resolved table is v2 table. Hopefully we can remove this rule eventually when v1 fallback is not needed anymore.
### Why are the changes needed?
Reduce duplicated code and make the catalog/table lookup logic consistent.
### Does this PR introduce any user-facing change?
no
### How was this patch tested?
existing tests
Closes#25747 from cloud-fan/lookup.
Authored-by: Wenchen Fan <wenchen@databricks.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
### What changes were proposed in this pull request?
1. With ANSI store assignment policy, an exception is thrown on casting failure
2. Introduce a new expression `AnsiCast` for the ANSI store assignment policy, so that the store assignment policy configuration won't affect the general `Cast`.
### Why are the changes needed?
As per ANSI SQL standard, ANSI store assignment policy should throw an exception on insertion failure, such as inserting out-of-range value to a numeric field.
### Does this PR introduce any user-facing change?
With ANSI store assignment policy, an exception is thrown on casting failure
### How was this patch tested?
Unit test
Closes#25997 from gengliangwang/newCast.
Authored-by: Gengliang Wang <gengliang.wang@databricks.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
### What changes were proposed in this pull request?
Scala 2.13 removes the parallel collections classes to a separate library, so first, this establishes a `scala-2.13` profile to bring it back, for future use.
However the library enables use of `.par` implicit conversions via a new class that is not in 2.12, which makes cross-building hard. This implements a suggested workaround from https://github.com/scala/scala-parallel-collections/issues/22 to avoid `.par` entirely.
### Why are the changes needed?
To compile for 2.13 and later to work with 2.13.
### Does this PR introduce any user-facing change?
Should not, no.
### How was this patch tested?
Existing tests.
Closes#25980 from srowen/SPARK-29296.
Authored-by: Sean Owen <sean.owen@databricks.com>
Signed-off-by: Sean Owen <sean.owen@databricks.com>
### What changes were proposed in this pull request?
Lambda functions to array `filter` can now take as input the index as well as the element. This behavior matches array `transform`.
### Why are the changes needed?
See JIRA. It's generally useful, and particularly so if you're working with fixed length arrays.
### Does this PR introduce any user-facing change?
Previously filter lambdas had to look like
`filter(arr, el -> whatever)`
Now, lambdas can take an index argument as well
`filter(array, (el, idx) -> whatever)`
### How was this patch tested?
I added unit tests to `HigherOrderFunctionsSuite`.
Closes#25666 from henrydavidge/filter-idx.
Authored-by: Henry D <henrydavidge@gmail.com>
Signed-off-by: Takuya UESHIN <ueshin@databricks.com>
### What changes were proposed in this pull request?
This PR exposes USE CATALOG/USE SQL commands as described in this [SPIP](https://docs.google.com/document/d/1jEcvomPiTc5GtB9F7d2RTVVpMY64Qy7INCA_rFEd9HQ/edit#)
It also exposes `currentCatalog` in `CatalogManager`.
Finally, it changes `SHOW NAMESPACES` and `SHOW TABLES` to use the current catalog if no catalog is specified (instead of default catalog).
### Why are the changes needed?
There is currently no mechanism to change current catalog/namespace thru SQL commands.
### Does this PR introduce any user-facing change?
Yes, you can perform the following:
```scala
// Sets the current catalog to 'testcat'
spark.sql("USE CATALOG testcat")
// Sets the current catalog to 'testcat' and current namespace to 'ns1.ns2'.
spark.sql("USE ns1.ns2 IN testcat")
// Now, the following will use 'testcat' as the current catalog and 'ns1.ns2' as the current namespace.
spark.sql("SHOW NAMESPACES")
```
### How was this patch tested?
Added new unit tests.
Closes#25771 from imback82/use_namespace.
Authored-by: Terry Kim <yuminkim@gmail.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
### What changes were proposed in this pull request?
Added new expression `SecondWithFraction` which produces the `seconds` part of timestamps/dates with fractional part containing microseconds. This expression is used only in the `DatePart` expression. As the result, `date_part()` and `extract` return seconds and microseconds as the fractional part of the seconds part when `field` is `SECOND` (or synonyms).
### Why are the changes needed?
The `date_part()` and `extract` were added to maintain feature parity with PostgreSQL which has different behavior for the `SECOND` value of the `field` parameter. The fix is needed to behave in the same way. Here is PostgreSQL's output:
```sql
# SELECT date_part('SECONDS', timestamp'2019-10-01 00:00:01.000001');
date_part
-----------
1.000001
(1 row)
```
### Does this PR introduce any user-facing change?
Yes, type of `date_part('SECOND', ...)` is changed from `INT` to `DECIMAL(8, 6)`.
Before:
```sql
spark-sql> SELECT date_part('SECONDS', '2019-10-01 00:00:01.000001');
1
```
After:
```sql
spark-sql> SELECT date_part('SECONDS', '2019-10-01 00:00:01.000001');
1.000001
```
### How was this patch tested?
- Added new tests to `DateExpressionSuite` for the `SecondWithFraction` expression
- Regenerated results of `date_part.sql`, `extract.sql` and `timestamp.sql`
- Updated results of `ExtractBenchmark`
Closes#25986 from MaxGekk/extract-seconds-from-timestamp.
Authored-by: Maxim Gekk <max.gekk@gmail.com>
Signed-off-by: HyukjinKwon <gurwls223@apache.org>
### What changes were proposed in this pull request?
This PR aims to remove `scalatest` deprecation warnings with the following changes.
- `org.scalatest.mockito.MockitoSugar` -> `org.scalatestplus.mockito.MockitoSugar`
- `org.scalatest.selenium.WebBrowser` -> `org.scalatestplus.selenium.WebBrowser`
- `org.scalatest.prop.Checkers` -> `org.scalatestplus.scalacheck.Checkers`
- `org.scalatest.prop.GeneratorDrivenPropertyChecks` -> `org.scalatestplus.scalacheck.ScalaCheckDrivenPropertyChecks`
### Why are the changes needed?
According to the Jenkins logs, there are 118 warnings about this.
```
grep "is deprecated" ~/consoleText | grep scalatest | wc -l
118
```
### Does this PR introduce any user-facing change?
No.
### How was this patch tested?
After Jenkins passes, we need to check the Jenkins log.
Closes#25982 from dongjoon-hyun/SPARK-29307.
Authored-by: Dongjoon Hyun <dhyun@apple.com>
Signed-off-by: Dongjoon Hyun <dhyun@apple.com>
### What changes were proposed in this pull request?
This PR regenerate the benchmark results in `catalyst` and `avro` module in order to compare JDK8/JDK11 result.
### Why are the changes needed?
This PR aims to verify that there is no regression on JDK11.
### Does this PR introduce any user-facing change?
No.
### How was this patch tested?
This is a test-only update. We need to run the benchmark manually.
Closes#25972 from dongjoon-hyun/SPARK-29300.
Authored-by: Dongjoon Hyun <dhyun@apple.com>
Signed-off-by: Dongjoon Hyun <dhyun@apple.com>
### What changes were proposed in this pull request?
Scala 2.13 emits a deprecation warning for procedure-like declarations:
```
def foo() {
...
```
This is equivalent to the following, so should be changed to avoid a warning:
```
def foo(): Unit = {
...
```
### Why are the changes needed?
It will avoid about a thousand compiler warnings when we start to support Scala 2.13. I wanted to make the change in 3.0 as there are less likely to be back-ports from 3.0 to 2.4 than 3.1 to 3.0, for example, minimizing that downside to touching so many files.
Unfortunately, that makes this quite a big change.
### Does this PR introduce any user-facing change?
No behavior change at all.
### How was this patch tested?
Existing tests.
Closes#25968 from srowen/SPARK-29291.
Authored-by: Sean Owen <sean.owen@databricks.com>
Signed-off-by: Dongjoon Hyun <dhyun@apple.com>
## What changes were proposed in this pull request?
Please refer [the link on dev. mailing list](https://lists.apache.org/thread.html/cc6489a19316e7382661d305fabd8c21915e5faf6a928b4869ac2b4a%3Cdev.spark.apache.org%3E) to see rationalization of this patch.
This patch adds the functionality to detect the possible correct issue on multiple stateful operations in single streaming query and logs warning message to inform end users.
This patch also documents some notes to inform caveats when using multiple stateful operations in single query, and provide one known alternative.
## How was this patch tested?
Added new UTs in UnsupportedOperationsSuite to test various combination of stateful operators on streaming query.
Closes#24890 from HeartSaVioR/SPARK-28074.
Authored-by: Jungtaek Lim (HeartSaVioR) <kabhwan.opensource@gmail.com>
Signed-off-by: Sean Owen <sean.owen@databricks.com>
### What changes were proposed in this pull request?
This patch adds AliasIdentifier to the list of classes that should be converted to Json in TreeNode.shouldConvertToJson.
### Why are the changes needed?
When asking prettyJson of an analyzed query plan which contains SubqueryAlias. The field of name of SubqueryAlias is "null", like:
```
[ {
"class" : "org.apache.spark.sql.catalyst.plans.logical.SubqueryAlias",
"num-children" : 1,
"name" : null,
"child" : 0
}, {
"class" : "org.apache.spark.sql.catalyst.plans.logical.Project",
...
```
Seems the alias name was in the Json before SPARK-19602.
It is fixed by this patch:
```
[ {
"class" : "org.apache.spark.sql.catalyst.plans.logical.SubqueryAlias",
"num-children" : 1,
"name" : {
"product-class" : "org.apache.spark.sql.catalyst.AliasIdentifier",
"identifier" : "t1"
},
"child" : 0
}, {
"class" : "org.apache.spark.sql.catalyst.plans.logical.Project",
...
```
### Does this PR introduce any user-facing change?
Yes. This patch changes null value of name field of SubqueryAlias in Json string to the alias identifier.
### How was this patch tested?
Added unit test.
Closes#25959 from viirya/SPARK-29186.
Authored-by: Liang-Chi Hsieh <viirya@gmail.com>
Signed-off-by: Liang-Chi Hsieh <liangchi@uber.com>
### What changes were proposed in this pull request?
Support the syntax of `ALTER (DATABASE|SCHEMA) database_name SET LOCATION` path. Please note that only Hive 3.x metastore support this syntax.
Ref:
https://cwiki.apache.org/confluence/display/Hive/LanguageManual+DDLhttps://issues.apache.org/jira/browse/HIVE-8472
### Why are the changes needed?
Support more syntax.
### Does this PR introduce any user-facing change?
No.
### How was this patch tested?
Unit test.
Closes#25883 from wangyum/SPARK-28476.
Authored-by: Yuming Wang <yumwang@ebay.com>
Signed-off-by: Xiao Li <gatorsmile@gmail.com>
### What changes were proposed in this pull request?
This patch fixes examples of Like/RLike to test its origin intention correctly. The example doesn't consider the default value of spark.sql.parser.escapedStringLiterals: it's false by default.
Please take a look at current example of Like:
d72f39897b/sql/catalyst/src/main/scala/org/apache/spark/sql/catalyst/expressions/regexpExpressions.scala (L97-L106)
If spark.sql.parser.escapedStringLiterals=false, then it should fail as there's `\U` in pattern (spark.sql.parser.escapedStringLiterals=false by default) but it doesn't fail.
```
The escape character is '\'. If an escape character precedes a special symbol or another
escape character, the following character is matched literally. It is invalid to escape
any other character.
```
For the query
```
SET spark.sql.parser.escapedStringLiterals=false;
SELECT '%SystemDrive%\Users\John' like '\%SystemDrive\%\Users%';
```
SQL parser removes single `\` (not sure that is intended) so the expressions of Like are constructed as following (I've printed out expression of left and right for Like/RLike):
> LIKE - left `%SystemDrive%UsersJohn` / right `\%SystemDrive\%Users%`
which are no longer having origin intention (see left).
Below query tests the origin intention:
```
SET spark.sql.parser.escapedStringLiterals=false;
SELECT '%SystemDrive%\\Users\\John' like '\%SystemDrive\%\\\\Users%';
```
> LIKE - left `%SystemDrive%\Users\John` / right `\%SystemDrive\%\\Users%`
Note that `\\\\` is needed in pattern as `StringUtils.escapeLikeRegex` requires `\\` to represent normal character of `\`.
Same for RLIKE:
```
SET spark.sql.parser.escapedStringLiterals=true;
SELECT '%SystemDrive%\Users\John' rlike '%SystemDrive%\\Users.*';
```
> RLIKE - left `%SystemDrive%\Users\John` / right `%SystemDrive%\\Users.*`
which is OK, but
```
SET spark.sql.parser.escapedStringLiterals=false;
SELECT '%SystemDrive%\Users\John' rlike '%SystemDrive%\Users.*';
```
> RLIKE - left `%SystemDrive%UsersJohn` / right `%SystemDrive%Users.*`
which no longer haves origin intention.
Below query tests the origin intention:
```
SET spark.sql.parser.escapedStringLiterals=true;
SELECT '%SystemDrive%\\Users\\John' rlike '%SystemDrive%\\\\Users.*';
```
> RLIKE - left `%SystemDrive%\Users\John` / right `%SystemDrive%\\Users.*`
### Why are the changes needed?
Because the example doesn't test the origin intention. Spark is now running automated tests from these examples, so now it's not only documentation issue but also test issue.
### Does this PR introduce any user-facing change?
No, as it only corrects documentation.
### How was this patch tested?
Added debug log (like above) and ran queries from `spark-sql`.
Closes#25957 from HeartSaVioR/SPARK-29281.
Authored-by: Jungtaek Lim (HeartSaVioR) <kabhwan.opensource@gmail.com>
Signed-off-by: HyukjinKwon <gurwls223@apache.org>
### What changes were proposed in this pull request?
New test compares outputs of expression examples in comments with results of `hiveResultString()`. Also I fixed existing examples where actual and expected outputs are different.
### Why are the changes needed?
This prevents mistakes in expression examples, and fixes existing mistakes in comments.
### Does this PR introduce any user-facing change?
No
### How was this patch tested?
Add new test to `SQLQuerySuite`.
Closes#25942 from MaxGekk/run-expr-examples.
Authored-by: Maxim Gekk <max.gekk@gmail.com>
Signed-off-by: HyukjinKwon <gurwls223@apache.org>
### What changes were proposed in this pull request?
Added a new config "spark.sql.additionalRemoteRepositories", a comma-delimited string config of the optional additional remote maven mirror.
### Why are the changes needed?
We need to connect the Maven repositories in IsolatedClientLoader for downloading Hive jars,
end-users can set this config if the default maven central repo is unreachable.
### Does this PR introduce any user-facing change?
No
### How was this patch tested?
Existing UT.
Closes#25849 from xuanyuanking/SPARK-29175.
Authored-by: Yuanjian Li <xyliyuanjian@gmail.com>
Signed-off-by: Dongjoon Hyun <dhyun@apple.com>
### What changes were proposed in this pull request?
After https://github.com/apache/spark/pull/25158 and https://github.com/apache/spark/pull/25458, SQL features of PostgreSQL are introduced into Spark. AFAIK, both features are implementation-defined behaviors, which are not specified in ANSI SQL.
In such a case, this proposal is to add a configuration `spark.sql.dialect` for choosing a database dialect.
After this PR, Spark supports two database dialects, `Spark` and `PostgreSQL`. With `PostgreSQL` dialect, Spark will:
1. perform integral division with the / operator if both sides are integral types;
2. accept "true", "yes", "1", "false", "no", "0", and unique prefixes as input and trim input for the boolean data type.
### Why are the changes needed?
Unify the external database dialect with one configuration, instead of small flags.
### Does this PR introduce any user-facing change?
A new configuration `spark.sql.dialect` for choosing a database dialect.
### How was this patch tested?
Existing tests.
Closes#25697 from gengliangwang/dialect.
Authored-by: Gengliang Wang <gengliang.wang@databricks.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
### What changes were proposed in this pull request?
It is very confusing that the default save mode is different between the internal implementation of a Data source. The reason that we had to have saveModeForDSV2 was that there was no easy way to check the existence of a Table in DataSource v2. Now, we have catalogs for that. Therefore we should be able to remove the different save modes. We also have a plan forward for `save`, where we can't really check the existence of a table, and therefore create one. That will come in a future PR.
### Why are the changes needed?
Because it is confusing that the internal implementation of a data source (which is generally non-obvious to users) decides which default save mode is used within Spark.
### Does this PR introduce any user-facing change?
It changes the default save mode for V2 Tables in the DataFrameWriter APIs
### How was this patch tested?
Existing tests
Closes#25876 from brkyvz/removeSM.
Lead-authored-by: Burak Yavuz <brkyvz@gmail.com>
Co-authored-by: Burak Yavuz <burak@databricks.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
### What changes were proposed in this pull request?
This patch proposes to skip PlanExpression when doing subexpression elimination on executors.
### Why are the changes needed?
Subexpression elimination can possibly cause NPE when applying on execution subquery expression like ScalarSubquery on executors. It is because PlanExpression wraps query plan. To compare query plan on executor when eliminating subexpression, can cause unexpected error, like NPE when accessing transient fields.
The NPE looks like:
```
[info] - SPARK-29239: Subquery should not cause NPE when eliminating subexpression *** FAILED *** (175 milliseconds)
[info] org.apache.spark.SparkException: Job aborted due to stage failure: Task 0 in stage 1395.0 failed 1 times, most recent failure: Lost task 0.0 in stage 1395.0 (TID 3447, 10.0.0.196, executor driver): java.lang.NullPointerException
[info] at org.apache.spark.sql.execution.LocalTableScanExec.stringArgs(LocalTableScanExec.scala:62)
[info] at org.apache.spark.sql.catalyst.trees.TreeNode.argString(TreeNode.scala:506)
[info] at org.apache.spark.sql.catalyst.trees.TreeNode.simpleString(TreeNode.scala:534)
[info] at org.apache.spark.sql.catalyst.plans.QueryPlan.simpleString(QueryPlan.scala:179)
[info] at org.apache.spark.sql.catalyst.plans.QueryPlan.verboseString(QueryPlan.scala:181)
[info] at org.apache.spark.sql.catalyst.trees.TreeNode.generateTreeString(TreeNode.scala:647)
[info] at org.apache.spark.sql.catalyst.trees.TreeNode.generateTreeString(TreeNode.scala:675)
[info] at org.apache.spark.sql.catalyst.trees.TreeNode.generateTreeString(TreeNode.scala:675)
[info] at org.apache.spark.sql.catalyst.trees.TreeNode.treeString(TreeNode.scala:569)
[info] at org.apache.spark.sql.catalyst.trees.TreeNode.treeString(TreeNode.scala:559)
[info] at org.apache.spark.sql.catalyst.trees.TreeNode.treeString(TreeNode.scala:551)
[info] at org.apache.spark.sql.catalyst.trees.TreeNode.toString(TreeNode.scala:548)
[info] at org.apache.spark.sql.catalyst.errors.package$TreeNodeException.<init>(package.scala:36)
[info] at org.apache.spark.sql.catalyst.errors.package$.attachTree(package.scala:56)
[info] at org.apache.spark.sql.catalyst.trees.TreeNode.makeCopy(TreeNode.scala:436)
[info] at org.apache.spark.sql.catalyst.trees.TreeNode.makeCopy(TreeNode.scala:425)
[info] at org.apache.spark.sql.execution.SparkPlan.makeCopy(SparkPlan.scala:102)
[info] at org.apache.spark.sql.execution.SparkPlan.makeCopy(SparkPlan.scala:63)
[info] at org.apache.spark.sql.catalyst.plans.QueryPlan.mapExpressions(QueryPlan.scala:132)
[info] at org.apache.spark.sql.catalyst.plans.QueryPlan.doCanonicalize(QueryPlan.scala:261)
```
### Does this PR introduce any user-facing change?
No
### How was this patch tested?
Added unit test.
Closes#25925 from viirya/SPARK-29239.
Authored-by: Liang-Chi Hsieh <viirya@gmail.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
### What changes were proposed in this pull request?
In the PR, I propose to replace function names in some expression examples by `_FUNC_`, and add a test to check that `_FUNC_` always present in all examples.
### Why are the changes needed?
Binding of a function name to an expression is performed in `FunctionRegistry` which is single source of truth. Expression examples should avoid using function name directly because this can make the examples invalid in the future.
### Does this PR introduce any user-facing change?
No
### How was this patch tested?
Added new test to `SQLQuerySuite` which analyses expression example, and check presence of `_FUNC_`.
Closes#25924 from MaxGekk/fix-func-examples.
Authored-by: Maxim Gekk <max.gekk@gmail.com>
Signed-off-by: Dongjoon Hyun <dhyun@apple.com>
### What changes were proposed in this pull request?
when the current catalog is session catalog, get/set the current namespace from/to the `SessionCatalog`.
### Why are the changes needed?
It's super confusing that we don't have a single source of truth for the current namespace of the session catalog. It can be in `CatalogManager` or `SessionCatalog`.
Ideally, we should always track the current catalog/namespace in `CatalogManager`. However, there are many commands that do not support v2 catalog API. They ignore the current catalog in `CatalogManager` and blindly go to `SessionCatalog`. This means, we must keep track of the current namespace of session catalog even if the current catalog is not session catalog.
Thus, we can't use `CatalogManager` to track the current namespace of session catalog because it changes when the current catalog is changed. To keep single source of truth, we should only track the current namespace of session catalog in `SessionCatalog`.
### Does this PR introduce any user-facing change?
No
### How was this patch tested?
Newly added and updated test cases.
Closes#25903 from cloud-fan/current.
Authored-by: Wenchen Fan <wenchen@databricks.com>
Signed-off-by: Gengliang Wang <gengliang.wang@databricks.com>
### What changes were proposed in this pull request?
Move the rule `RemoveAllHints` after the batch `Resolution`.
### Why are the changes needed?
User-defined hints can be resolved by the rules injected via `extendedResolutionRules` or `postHocResolutionRules`.
### Does this PR introduce any user-facing change?
No
### How was this patch tested?
Added a test case
Closes#25746 from gatorsmile/moveRemoveAllHints.
Authored-by: Xiao Li <gatorsmile@gmail.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
### What changes were proposed in this pull request?
Added "array indices start at 1" in annotation to make it clear for the usage of function slice, in R Scala Python component
### Why are the changes needed?
It will throw exception if the value stare is 0, but array indices start at 0 most of times in other scenarios.
### Does this PR introduce any user-facing change?
Yes, more info provided to user.
### How was this patch tested?
No tests added, only doc change.
Closes#25704 from sheepstop/master.
Authored-by: sheepstop <yangting617@gmail.com>
Signed-off-by: HyukjinKwon <gurwls223@apache.org>
## What changes were proposed in this pull request?
partition path should be qualified to store in catalog.
There are some scenes:
1. ALTER TABLE t PARTITION(b=1) SET LOCATION '/path/x'
should be qualified: file:/path/x
**Hive 2.0.0 does not support for location without schema here.**
```
FAILED: Execution Error, return code 1 from org.apache.hadoop.hive.ql.exec.DDLTask. {0} is not absolute or has no scheme information. Please specify a complete absolute uri with scheme information.
```
2. ALTER TABLE t PARTITION(b=1) SET LOCATION 'x'
should be qualified: file:/tablelocation/x
**Hive 2.0.0 does not support for relative location here.**
3. ALTER TABLE t ADD PARTITION(b=1) LOCATION '/path/x'
should be qualified: file:/path/x
**the same with Hive 2.0.0**
4. ALTER TABLE t ADD PARTITION(b=1) LOCATION 'x'
should be qualified: file:/tablelocation/x
**the same with Hive 2.0.0**
Currently only ALTER TABLE t ADD PARTITION(b=1) LOCATION for hive serde table has the expected qualified path. we should make other scenes to be consist with it.
Another change is for alter table location.
## How was this patch tested?
add / modify existing TestCases
Closes#17254 from windpiger/qualifiedPartitionPath.
Authored-by: windpiger <songjun@outlook.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
### What changes were proposed in this pull request?
This PR supports UPDATE in the parser and add the corresponding logical plan. The SQL syntax is a standard UPDATE statement:
```
UPDATE tableName tableAlias SET colName=value [, colName=value]+ WHERE predicate?
```
### Why are the changes needed?
With this change, we can start to implement UPDATE in builtin sources and think about how to design the update API in DS v2.
### Does this PR introduce any user-facing change?
No.
### How was this patch tested?
New test cases added.
Closes#25626 from xianyinxin/SPARK-28892.
Authored-by: xy_xin <xianyin.xxy@alibaba-inc.com>
Signed-off-by: Wenchen Fan <wenchen@databricks.com>
